#, fuzzy msgid "" msgstr "" "Project-Id-Version: Cinder Release Notes\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2024-04-24 17:05+0000\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../../:291 stable/ussuri>:1307 #: victoria-eom>:848 msgid "'backup' for backup status resets" msgstr "" #: ../../:1299 msgid "'backupStatusUpdate' for backup status resets" msgstr "" #: ../../:290 stable/ussuri>:1306 #: victoria-eom>:847 msgid "'snapshot' for snapshot status resets" msgstr "" #: ../../:289 stable/ussuri>:1305 #: victoria-eom>:846 msgid "'volume' for volume status resets" msgstr "" #: ../../:1298 msgid "'volumeStatusUpdate' for snapshot status resets" msgstr "" #: ../../:1297 msgid "'volumeStatusUpdate' for volume status resets" msgstr "" #: ../../:689 msgid "" "(Note that whether a volume should be considered \"full\", even if it " "doesn't contain exactly *n* GiB of data for an *n* GiB volume, can depend " "upon the storage backend technology used.)" msgstr "" #: ../../:664 msgid "**Anomalies with encrypted volumes**" msgstr "" #: ../../:676 yoga-eom>:635 msgid "**Cinder use of cgroups v1**" msgstr "" #: ../../:728 msgid "**NFS-based backend drivers and qcow2 version 2 images**" msgstr "" #: ../../:659 msgid "**NVMe-oF issues**" msgstr "" #: ../../:560 msgid "**Policy configuration changes**" msgstr "" #: ../../:168 xena-eom>:759 yoga-eom>:693 msgid "**RBD driver: Enable Ceph V2 Clone API and Ceph Trash auto purge**" msgstr "" #: ../../:1247 msgid "**Supported Ceph versions**" msgstr "" #: ../../:456 msgid "14.0.0" msgstr "" #: ../../:397 msgid "14.0.1" msgstr "" #: ../../:340 msgid "14.0.2" msgstr "" #: ../../:320 msgid "14.0.3" msgstr "" #: ../../:299 msgid "14.0.4" msgstr "" #: ../../:230 msgid "14.1.0" msgstr "" #: ../../:208 msgid "14.2.0" msgstr "" #: ../../:177 msgid "14.2.1" msgstr "" #: ../../:124 msgid "14.3.0" msgstr "" #: ../../:75 msgid "14.3.1" msgstr "" #: ../../:5 msgid "14.3.1-9" msgstr "" #: ../../:905 msgid "15.0.0" msgstr "" #: ../../:882 msgid "15.0.1" msgstr "" #: ../../:827 msgid "15.1.0" msgstr "" #: ../../:742 msgid "15.2.0" msgstr "" #: ../../:708 msgid "15.3.0" msgstr "" #: ../../:403 msgid "15.4.0" msgstr "" #: ../../:326 msgid "15.4.1" msgstr "" #: ../../:200 msgid "15.5.0" msgstr "" #: ../../:138 msgid "15.6.0" msgstr "" #: ../../:5 msgid "15.6.0-22" msgstr "" #: ../../:814 msgid "16.0.0" msgstr "" #: ../../:750 msgid "16.1.0" msgstr "" #: ../../:412 msgid "16.2.0" msgstr "" #: ../../:340 msgid "16.2.1" msgstr "" #: ../../:227 msgid "16.3.0" msgstr "" #: ../../:180 msgid "16.4.0" msgstr "" #: ../../:149 msgid "16.4.1" msgstr "" #: ../../:123 msgid "16.4.2" msgstr "" #: ../../:5 msgid "16.4.2-17" msgstr "" #: ../../:572 msgid "17.0.0" msgstr "" #: ../../:518 msgid "17.0.1" msgstr "" #: ../../:407 msgid "17.1.0" msgstr "" #: ../../:221 msgid "17.2.0" msgstr "" #: ../../:132 msgid "17.3.0" msgstr "" #: ../../:91 msgid "17.4.0" msgstr "" #: ../../:5 msgid "17.4.0-11" msgstr "" #: ../../:436 msgid "18.0.0" msgstr "" #: ../../:298 msgid "18.1.0" msgstr "" #: ../../:159 msgid "18.2.0" msgstr "" #: ../../:116 msgid "18.2.1" msgstr "" #: ../../:5 msgid "18.2.1-12" msgstr "" #: ../../:404 msgid "19.0.0" msgstr "" #: ../../:305 msgid "19.1.0" msgstr "" #: ../../:256 msgid "19.1.1" msgstr "" #: ../../:165 msgid "19.2.0" msgstr "" #: ../../:95 msgid "19.3.0" msgstr "" #: ../../:5 msgid "19.3.0-2" msgstr "" #: ../../:509 msgid "" "2. The FlexGroup pool has a different view of aggregate capabilites, " "changing them by a list of elements, instead of a single element. They are " "``netapp_aggregate``, ``netapp_raid_type``, ``netapp_disk_type`` and " "``netapp_hybrid_aggregate``. The ``netapp_aggregate_used_percent`` " "capability is an average of used percent of all FlexGroup's aggregates." msgstr "" #: ../../:459 msgid "20.0.0" msgstr "" #: ../../:412 msgid "20.0.1" msgstr "" #: ../../:272 msgid "20.1.0" msgstr "" #: ../../:169 msgid "20.2.0" msgstr "" #: ../../:87 msgid "20.3.0" msgstr "" #: ../../:26 msgid "20.3.1" msgstr "" #: ../../:5 msgid "20.3.2" msgstr "" #: ../../:299 msgid "21.0.0" msgstr "" #: ../../:239 msgid "21.1.0" msgstr "" #: ../../:126 msgid "21.2.0" msgstr "" #: ../../:45 msgid "21.3.0" msgstr "" #: ../../:5 msgid "21.3.1" msgstr "" #: ../../:164 msgid "22.0.0" msgstr "" #: ../../:82 msgid "22.1.0" msgstr "" #: ../../:45 msgid "22.1.1" msgstr "" #: ../../:5 msgid "22.1.2" msgstr "" #: ../../:33 msgid "23.0.0" msgstr "" #: ../../:5 msgid "23.1.0" msgstr "" #: ../../:25 msgid "24.0.0" msgstr "" #: ../../:5 msgid "24.0.0-1" msgstr "" #: ../../:5 current msgid "24.0.0.0rc1-16" msgstr "" #: ../../:515 msgid "" "3. The ``utilization`` capability is not calculated to FlexGroup pools, it " "is always set to default of 50." msgstr "" #: ../../:518 msgid "" "4. The driver cannot support consistency group with volumes that are over " "FlexGroup pools." msgstr "" #: ../../:521 msgid "" "5. The driver cannot support multi-attach with volumes that are over " "FlexGroup pools." msgstr "" #: ../../:524 msgid "" "6. For volumes over the FlexGroup pool, the operations of clone volume, " "create snapshot and create volume from an image are implemented as the NFS " "generic driver. Hence, it does not rely on the ONTAP storage to perform " "those operations." msgstr "" #: ../../:529 msgid "" "7. A driver with FlexGroup pools has snapshot support disabled by default. " "To enable, you must set ``nfs_snapshot_support`` to true in the backend's " "configuration section of the cinder configuration file." msgstr "" #: ../../:533 msgid "" "8. The driver image cache is not applied for volumes over FlexGroup pools. " "It can use the core image cache for avoiding downloading twice, though." msgstr "" #: ../../:536 msgid "" "9. Given that the FlexGroup pool may be on several cluster nodes, the QoS " "minimum support is only enabled if all nodes support it." msgstr "" #: ../../:945 msgid "" "A general framework to accommodate hardware compression accelerators for " "compression of volumes uploaded to the Image service (Glance) as images and " "decompression of compressed images used to create volumes is introduced." msgstr "" #: ../../:1065 msgid "" "A key aspect of *supported* drivers is that there is a fully functioning " "third-party CI system that reports on all proposed changes to the cinder " "code. However, the fact that there are 'unsupported' drivers at all " "indicates that third-party CI systems are unfortunately not always fully " "functioning. You may consult the report at the following link to learn the " "extent to which a particular driver's CI system is reporting on the " "development branch of cinder:" msgstr "" #: ../../:896 stable/ussuri>:1419 msgid "" "A lock in the volume manager flow generally prevents this on normal clone " "volume operations, but this clone method in the driver is called for " "operations such as cloning from the cinder image-volume cache or cloning " "from a cinder backend used as a glance store." msgstr "" #: ../../:571 msgid "" "A new API microversion V3.67 is introduced to inform clients when inclusion " "of a project_id in API URLs is optional. The V3.67 microversion is only used " "as an indicator that the API accepts a URL without a project_id, and this " "applies to all requests regardless of the microversion in the request. For " "example, an API node serving V3.67 or greater will accept a URL without a " "project_id even if the request asks for V3.0. Likewise, it will accept a URL " "containing a project_id even if the request asks for V3.67." msgstr "" #: ../../:419 stable/train>:1162 msgid "" "A new check is added to the ``cinder-status upgrade check`` CLI to check for " "the configuration of CoprHD, HGST or ITRI DISCO drivers. These drivers were " "removed in the Stein release and should not be configured at the time of " "upgrade." msgstr "" #: ../../:426 stable/train>:1169 msgid "" "A new check is added to the ``cinder-status upgrade check`` CLI to check for " "the use of ``cinder.volume.drivers.windows.windows.WindowsDriver`` and a " "message is reported that the user needs to update the setting to ``cinder." "volume.drivers.windows.iscsi.WindowsISCSIDriver`` if it is encountered." msgstr "" #: ../../:406 stable/train>:1149 msgid "" "A new check is added to the ``cinder-status upgrade check`` CLI to check for " "the use of backup driver module path instead of full driver class path in " "the ``backup_driver`` configuration setting." msgstr "" #: ../../:1190 msgid "" "A new check is added to the ``cinder-status upgrade check`` CLI to check for " "the use of the deprecated ``cinder.quota.NestedDbQuotaDriver``. This driver " "will be replaced by a new, OpenStack-wide, nested quota management." msgstr "" #: ../../:630 msgid "" "A new policy was introduced as part of the feature described in the `User " "visible extra specs `_ section of the `Cinder " "Administration Guide`:" msgstr "" #: ../../:624 msgid "" "A new policy was introduced to govern an operation previously controlled by " "a policy that is not being removed, but whose other governed actions are " "conceptually different:" msgstr "" #: ../../:547 msgid "" "A new target, spdk-nvmeof, is added for the SPDK driver over RDMA. It allows " "cinder to use SPDK target in order to create/delete subsystems on attaching/" "detaching an SPDK volume to/from an instance." msgstr "" #: ../../:554 msgid "" "A new volume driver, SPDK, is added for Storage Performance Development Kit " "NVMe-oF target handling, that allows Cinder to manage volumes in SPDK NVMe-" "oF driver." msgstr "" #: ../../:1094 msgid "A new volume is created without a type" msgstr "" #: ../../:694 stable/ussuri>:736 #: victoria-eom>:1272 msgid "" "A request to delete the currently configured ``default_volume_type`` will " "fail. (You can delete that volume-type, but you cannot do it while it is " "the value of the configuration option.)" msgstr "" #: ../../:693 msgid "" "A similar situation can arise when a user creates a volume of an encrypted " "volume type from an image in Glance. If the image happens to be sized very " "close to the gibibyte boundary given by the requested volume size, the " "operation may fail if the image data plus the encryption metadata exceeds " "the requested volume size." msgstr "" #: ../../:876 msgid "" "A small list of volume type extra specs are now visible to regular users, " "and not just to cloud administrators. Cloud administrators that wish to opt " "out of this feature should consult the \"Security considerations\" portion " "of the \"User visible extra specs\" section in the Cinder Administration " "guide." msgstr "" #: ../../:551 msgid "" "A small list of volume type extra specs are now visible to regular users, " "and not just to cloud administrators. This allows users to see non-senstive " "extra specs, which may help them choose a particular volume type when " "creating volumes. Sensitive extra specs are still only visible to cloud " "administrators. See the \"User visible extra specs\" section in the Cinder " "Administration guide for more information." msgstr "" #: ../../:501 msgid "" "A volume in ``available`` or ``error`` status can be re-imaged directly. To " "re-image a volume in ``reserved`` status, you must include the " "``reimage_reserved`` parameter set to ``true``. When reimaging a volume, the " "volume state will be changed to ``downloading`` first." msgstr "" #: ../../:412 stable/train>:1155 msgid "" "A warning has been added to the ``cinder-status upgrade check`` CLI if a " "``policy.json`` file is present. Documentation has been updated to correct " "the file as ``policy.yaml`` if any policies need to be changed from their " "defaults." msgstr "" #: ../../:1314 msgid "" "A warning has been added to the ``cinder-status upgrade check`` CLI to " "detect whether the ``periodic_interval`` option has been modified from its " "default value to remind you which of the above situations currently applies " "to you." msgstr "" #: ../../:503 stable/ussuri>:528 msgid "API request: ``POST /v3/{project_id}/types``" msgstr "" #: ../../:878 msgid "" "Ability to add minimum and maximum volume size restrictions which can be set " "on a per volume-type granularity. New volume type keys of 'provisioning:" "min_vol_size' and 'provisioning:max_vol_size'." msgstr "" #: ../../:645 msgid "Add Dell EMC PowerStore Storage Driver (iSCSI, FC)." msgstr "" #: ../../:596 msgid "Add Peer Persistence support for HPE Primera backend." msgstr "" #: ../../:554 stable/ussuri>:604 msgid "" "Add Python 3 support to the Brocade Zone Manager driver. (bug #1888548)." msgstr "" #: ../../:479 msgid "" "Add ``user_id`` attribute to response body of list backup with detail and " "show backup detail APIs." msgstr "" #: ../../:1140 msgid "Add a new config option 'zadara_access_key': Zadara VPSA access key." msgstr "" #: ../../:817 msgid "" "Add granularity to the ``volume_extension:volume_type_encryption`` policy " "with the addition of distinct actions for create, get, update, and delete:" msgstr "" #: ../../:498 msgid "" "Add microversion 3.68 to support the ability to re-image a volume with a " "specific image. Specify the ``os-reimage`` action in the request body." msgstr "" #: ../../:708 msgid "Add reverting to snapshot support in Pure Storage Cinder driver." msgstr "" #: ../../:560 msgid "Add support for deferred deletion in the RBD volume driver." msgstr "" #: ../../:59 msgid "" "Add the new ``os-extend_volume_completion`` volume action, which the Nova " "compute agent can use to notify Cinder that it has finished handling the " "``volume-extended`` external server event." msgstr "" #: ../../:180 msgid "" "Added Features like Trisync replication support for Pure driver, volume " "group snapshot support for IBM SVF driver, Unisphere 10 support for Dell EMC " "PowerMax driver, Host assisted migration and retype support for Hitachi VSP " "driver." msgstr "" #: ../../:177 msgid "" "Added HPE XP iSCSI and FC, Fungible NVMe-TCP, NetApp NVMe-TCP storage " "drivers." msgstr "" #: ../../:914 msgid "" "Added MacroSAN drivers that allows cinder to manage volumes in ISCSI and FC " "environment" msgstr "" #: ../../:618 msgid "Added Multi-attach feature in Nimble driver." msgstr "" #: ../../:197 msgid "Added NVMe-TCP volume driver for Fungible Storage Cluster." msgstr "" #: ../../:193 msgid "Added NVMe/TCP volume driver for NetApp ONTAP Storage Cluster." msgstr "" #: ../../:937 msgid "Added Peer Persistence support in HPE 3PAR cinder driver." msgstr "" #: ../../:924 msgid "" "Added SandStone driver that allows cinder to manage volumes in ISCSI " "environment." msgstr "" #: ../../:469 msgid "" "Added ``project_id`` attribute to response body of list groups with detail, " "list group snapshots with detail, show group detail and show group snapshot " "detail APIs since microversion \"3.58\"." msgstr "" #: ../../:1059 msgid "" "Added a new Cinder driver for RackScale Design NVMe-oF storage solution." msgstr "" #: ../../:493 msgid "" "Added a new config ``reinit_driver_count`` in volume driver, which indicates " "the maximum retry limit for driver re-initialization when it fails to " "initialize a volume driver. Its default value is 3. The interval of retry is " "exponentially backoff, and will be 1s, 2s, 4s etc." msgstr "" #: ../../:1355 msgid "" "Added a new config option ``nexenta_group_snapshot_template``. This option " "specifies template string to generate group snapshot name." msgstr "" #: ../../:1351 msgid "" "Added a new config option ``nexenta_origin_snapshot_template``. This option " "specifies template string to generate origin name of clone." msgstr "" #: ../../:1343 msgid "" "Added a new config option ``nexenta_rest_backoff_factor``. This option " "specifies the backoff factor to apply between connection attempts to " "NexentaStor management REST API server." msgstr "" #: ../../:1335 msgid "" "Added a new config option ``nexenta_rest_connect_timeout``. This option " "specifies the time limit (in seconds), within which the connection to " "NexentaStor management REST API server must be established." msgstr "" #: ../../:1339 msgid "" "Added a new config option ``nexenta_rest_read_timeout``. This option " "specifies the time limit (in seconds), within which NexentaStor management " "REST API server must send a response." msgstr "" #: ../../:1347 msgid "" "Added a new config option ``nexenta_rest_retry_count``. This option " "specifies the number of times to repeat NexentaStor management REST API call " "in case of connection errors and NexentaStor appliance EBUSY or ENOENT " "errors." msgstr "" #: ../../:312 msgid "" "Added a new configuration option ``image_conversion_disable`` to disallow " "conversion between image disk format and volume format when doing certain " "operations. This can prevent performance problems on a cinder-volume node " "due to the large amount of system resources consumed during image conversion." " The default value is ``False``, which corresponds to Cinder's current " "behavior to always attempt image conversion." msgstr "" #: ../../:1091 msgid "" "Added a new default volume type ``__DEFAULT__`` which will be used when" msgstr "" #: ../../:527 msgid "" "Added a new option ``quobyte_overlay_volumes`` for the Quobyte volume driver." " This option activates internal snapshots who allow to create volumes from " "snapshots as overlay files based on the volume from snapshot cache. This " "significantly speeds up the creation of volumes from large snapshots." msgstr "" #: ../../:465 msgid "" "Added an ``excluded_domain_ips`` option to the Dell EMC SC driver. This is " "identical to the excluded_domain_ip option only comma separated rather than " "multiple entry. This is concatenated with the ``excluded_domain_ip`` option." msgstr "" #: ../../:622 msgid "" "Added an ``included_domain_ips`` option to the Dell EMC SC driver. This " "option takes a comma separated list of target IP addresses listed under the " "fault domains to whitelisted. This option only applies to the ISCSI driver." msgstr "" #: ../../:562 msgid "Added backend FC and iSCSI drivers for NEC V series Storage." msgstr "" #: ../../:293 msgid "Added backend driver for HPE XP storage." msgstr "" #: ../../:497 msgid "Added backend driver for Hedvig iSCSI storage." msgstr "" #: ../../:1269 msgid "" "Added boolean config option ``allow_compression_on_image_upload`` in " "[default] section of cinder.conf to enable/disable image compression on " "image upload. The default value of this option is ``false``, which means " "image compression is disabled." msgstr "" #: ../../:1144 msgid "" "Added config option ``backup_mount_attempts`` to specify the number of " "attempts to mount NFS share in the NFS backup driver." msgstr "" #: ../../:1010 msgid "" "Added consistency group capability to generic volume groups for NexentaStor5 " "iSCSI and NFS drivers." msgstr "" #: ../../:624 msgid "Added consistency group support in Nimble Storage driver." msgstr "" #: ../../:308 msgid "" "Added iSCSI and Fibre Channel volume drivers for DataCore's SANsymphony and " "Hyper-converged Virtual SAN storage." msgstr "" #: ../../:574 msgid "Added netapp copyoffload provider location." msgstr "" #: ../../:626 msgid "" "Added new APIs on microversion 3.61 to show ``cluster_name`` attribute in " "the response body of volume details for admin." msgstr "" #: ../../:580 msgid "" "Added new Ceph iSCSI driver rbd_iscsi. This new driver is derived from the " "rbd driver and allows all the same features as the rbd driver. The only " "difference is that volume attachments are done via iSCSI." msgstr "" #: ../../:485 msgid "" "Added new backup driver to enable backing up cinder volumes to S3-compatible " "storage. See the reference `S3 backup driver `_ " "for more information." msgstr "" #: ../../:989 msgid "" "Added new configuration options to allow more specific control over some " "periodic processes. See the 'Upgrade' section for details." msgstr "" #: ../../:454 msgid "Added revert to snapshot feature in Nimble driver." msgstr "" #: ../../:994 msgid "" "Added revert to snapshot support for NexentaStor5 iSCSI and NFS drivers." msgstr "" #: ../../:1018 msgid "" "Added snapshot manage/unmanage support for NexentaStor5 iSCSI and NFS " "drivers." msgstr "" #: ../../:1263 msgid "" "Added string config option ``compression_format`` in [default] section of " "cinder.conf to specify image compression format. Currently the only legal " "value for this option is ``gzip``." msgstr "" #: ../../:611 msgid "" "Added support for Open-E JovianDSS data storage. Driver supports Open-E " "disaster recovery feature and cascade volume deletion in addition to support " "minimum required functions." msgstr "" #: ../../:535 msgid "Added support for QTS fw 4.4.0 to QNAP Cinder driver." msgstr "" #: ../../:634 msgid "" "Added support for QoS in the Pure Storage drivers. QoS support is available " "from Purity//FA 5.3.0" msgstr "" #: ../../:1083 msgid "Added support for UC-Series model to Synology Cinder driver." msgstr "" #: ../../:581 msgid "" "Added support for changing storage policy of backend volumes created by " "VMwareVStorageObjectDriver using retype API." msgstr "" #: ../../:1002 msgid "" "Added support for creating, deleting, and updating consistency groups for " "NexentaStor5 iSCSI and NFS drivers." msgstr "" #: ../../:699 msgid "" "Added support for project specific default volume types. Microversion 3.62 " "of the Block Storage API introduces new calls to set, get, and unset a " "default volume type for a specific project. Project specific defaults have " "higher priority than the default_volume_type option in cinder.conf" msgstr "" #: ../../:1006 msgid "" "Added support for taking, deleting, and restoring consistency group " "snapshots for NexentaStor5 iSCSI and NFS drivers." msgstr "" #: ../../:492 msgid "" "Added support of authenticity verification through self-signed certificates " "for JovianDSS data storage. Added support of revert to snapshot " "functionality. Expands unit-test coverage for JovianDSS driver." msgstr "" #: ../../:726 msgid "" "Added support to cinder backup for use of the Zstandard compression " "algorithm. To use it, set the ``backup_compression_algorithm`` to ``zstd`` " "in the cinder configuration file. (The default value for this option is " "``zlib``.)" msgstr "" #: ../../:836 stable/ussuri>:848 msgid "" "Added the ``image_conversion_cpu_limit`` and " "``image_conversion_address_space_limit`` as configurable parameters. This " "adds configurability to the image conversion process to prevent the process " "from timing out when converting larger images." msgstr "" #: ../../:1022 msgid "" "Added the ability to list manageable volumes and snapshots for NexentaStor5 " "iSCSI and NFS drivers." msgstr "" #: ../../:718 msgid "" "Added the option ``storwize_svc_retain_aux_volume`` to IBM Storwize Driver " "which takes ``True`` or ``False``. This option is to enable or disable " "retaining of auxiliary volume on secondary storage during delete of the " "volume on primary storage or moving the primary volume from mirror to non-" "mirror with replication enabled. The default value is ``False``." msgstr "" #: ../../:855 msgid "" "Added the property ``src_backup_id`` to the volume's metadata, to record " "from which backup the new volume was created. If the ``src_backup_id`` " "exists in the volume's metadata, it will be updated. When restoring from a " "chain of incremental backups, ``src_backup_id`` is set to the last " "incremental backup used for the restore." msgstr "" #: ../../:475 msgid "Added transfer pagination support since microversion 3.59." msgstr "" #: ../../:1230 msgid "" "Added user messages for backup operations that a user can query through the " "`Messages API `_. These allow users to retrieve error messages for asynchronous " "failures in backup operations like create, delete, and restore." msgstr "" #: ../../:592 msgid "" "Added vSphere storage policy support in VMwareVStorageObjectDriver. The " "storage policies that must be associated with the volumes can be specified " "using volume type extra-spec key 'vmware:storage_profile' similar to VMware " "VMDK driver. The vSphere version must be 6.7 or above to use this feature." msgstr "" #: ../../:1014 msgid "" "Added volume manage/unmanage support for NexentaStor5 iSCSI and NFS drivers." msgstr "" #: ../../:492 msgid "" "Additionally, ``consumes_quota`` can be used as a listing filter for volumes " "and snapshots. Its availability is controlled by its inclusion in ``etc/" "cinder/resource_filters.json``, where it is included by default. The " "default listing behavior is not to use this filter." msgstr "" #: ../../:1192 msgid "Additionally, the following bugs were addressed:" msgstr "" #: ../../:1240 msgid "" "Additionally, the following minor fixes for which no bugs were filed were " "made:" msgstr "" #: ../../:956 msgid "" "Additionally, the framework provides software-based compression using GUNzip " "tool if a suitable hardware accelerator is not available. Because this " "software fallback could cause performance problems if the Cinder services " "are not deployed on sufficiently powerful nodes, the default setting is " "*not* to enable compression on image upload or download." msgstr "" #: ../../:991 msgid "" "After being marked unsupported in the Rocky release the CoprHD driver is now " "being removed in Stein. The vendor has indicated that this is desired as " "the CoprHD driver has been deprecated." msgstr "" #: ../../:545 msgid "" "After the online database migrations from cinder 15.4.0 or more recent have " "run, you may upgrade to Ussuri in the normal way." msgstr "" #: ../../:1036 msgid "" "All volumes and snapshots created using the PowerMax for Cinder driver now " "have additional metadata included pertaining to the details of the asset on " "the backend storage array." msgstr "" #: ../../:680 msgid "" "Although the encryption metadata consumes less than 1% of the volume, " "suppose that a user wants to retype a volume of a non-encrypted type to an " "encrypted type of the same size. If the non-encrypted volume is \"full\", " "we are in the position of trying to fit 101% of its capacity into the " "encrypted volume, which is not possible under the current laws of physics, " "and the retype should fail (see `Known Issues `_ for " "volume encryption in the cinder documentation)." msgstr "" #: ../../:400 msgid "" "An example of the SQL commands to generate these indexes can be found in the " "`specific troubleshooting guide `_." msgstr "" #: ../../:891 stable/ussuri>:1414 msgid "" "An incorrect lock in the remotefs code, which is used for the NFS driver, " "and other similar drivers, resulted in concurrent clone volume operations " "failing. create_cloned_volume now locks on the source volume id, meaning " "multiple clone operations from the same source volume are serialized." msgstr "" #: ../../:45 msgid "" "An operator may enable this functionality by creating a specific volume type " "with the property::" msgstr "" #: ../../:1238 msgid "As a reminder, the finer-grained policies are:" msgstr "" #: ../../:543 msgid "" "As of API version 3.66, volume snapshots of in-use volumes can be created " "without passing the 'force' flag, and the 'force' flag is considered invalid " "for this request. For backward compatability, however, when the 'force' " "flag is passed with a value evaluating to True, it is silently ignored." msgstr "" #: ../../:444 stable/train>:50 stable/ussuri>:62 #: stable/zed>:271 victoria-eom>:50 wallaby-eom>:50 xena-eom>:197 yoga-eom>:304 msgid "" "As part of the fix for `Bug #1996188 `_, cinder is now more strict in checking that the ``disk_format`` " "recorded for an image (as revealed by the Image Service API image-show " "response) matches what cinder detects when it downloads the image. Thus, " "some requests to create a volume from a source image that had previously " "succeeded may fail with an ``ImageUnacceptable`` error." msgstr "" #: ../../:138 stable/2023.2>:156 xena-eom>:61 #: yoga-eom>:143 msgid "" "As part of the fix for `Bug #2004555 `_, cinder now rejects user attachment delete requests for " "attachments that are being used by nova instances to ensure that no leftover " "devices are produced on the compute nodes which could be used to access " "another project's volumes. Terminate connection, detach, and force detach " "volume actions (calls that are not usually made by users directly) are, in " "most cases, not allowed for users." msgstr "" #: ../../:100 msgid "" "As part of the fix for `Bug #2004555 `_, cinder now rejects user attachment delete requests for " "attachments that are being used by nova instances to ensure that no leftover " "devices are produced on the compute nodes which could be used to access " "another project's volumes. Terminate connection, detach, and force detach " "volume actions are not allowed for users." msgstr "" #: ../../:867 msgid "" "Before the Rocky release, this driver was named ``cinder.volume.drivers." "dell_emc.scaleio.driver.ScaleIODriver``. That name was deprecated in the " "Rocky release. In this release, the pre-Rocky name for this driver is no " "longer recognized and support for configuration options beginning with " "``sio`` has been removed. Thus any driver configuration options that start " "with ``sio`` must be updated to ``powerflex`` in your ``cinder.conf`` before " "you deploy this release." msgstr "" #: ../../:476 stable/ussuri>:506 msgid "Before upgrading from Stein, you did **not** purge the cinder database" msgstr "" #: ../../:660 msgid "" "Beginning with Cinder 12.0.0, you only need to specify policies in your " "policy file that you want to **differ** from the default values. Unspecified " "policies will use the default values *defined in the code*. Given that a " "default value *must* be specified *in the code* when a new policy is " "introduced, the ``default`` policy, which was formerly used as a catch-all " "for policy targets that were not defined elsewhere in the policy file, has " "no effect. We mention this because an old upgrade strategy was to use the " "policy file from the previous release with ``\"default\": \"role:admin\"`` " "(or ``\"default\": \"!\"``) so that newly introduced actions would be " "blocked from end users until the operator had time to assess the " "implications of exposing these actions. This strategy no longer works. " "Hopefully this isn't a problem because we're defining sensible defaults in " "the code. It would be a good idea, however, to generate the sample policy " "file with each release (see instructions above) to verify this for yourself." msgstr "" #: ../../:631 msgid "" "Beginning with Cinder version 12.0.0, as part of the Queens release " "\"policies in code\" community effort, Cinder has had the ability to run " "without a policy file because sensible default values are specified in the " "code. Customizing the policies in effect at your site, however, still " "requires a policy file. The default location of this file has been ``/etc/" "cinder/policy.json`` (although the documentation has indicated otherwise). " "With this release, the default location of this file is changed to ``/etc/" "cinder/policy.yaml``." msgstr "" #: ../../:957 msgid "" "Beginning with microversion 3.60, users may apply time comparison filters to " "the volume summary list and volume detail list requests by using the " "``created_at`` or ``updated_at`` fields. Time must be expressed in ISO 8601 " "format. See the `Block Storage API v3 Reference `_ for details." msgstr "" #: ../../:686 stable/ussuri>:728 #: victoria-eom>:1264 msgid "" "Beginning with the Train release, untyped volumes (that is, volumes with no " "volume-type) have been disallowed. To facilitate this, a ``__DEFAULT__`` " "volume-type was included as part of the Train database migration. In this " "release, handling of the default volume-type has been improved:" msgstr "" #: ../../:1055 msgid "Brocade Fibre Channel Zone Manager driver" msgstr "" #: ../../:43 current stable/2023.1>:10 #: stable/2023.1>:50 stable/2023.1>:150 stable/2023.1>:456 stable/2023.2>:10 #: stable/2023.2>:168 stable/2024.1>:10 stable/2024.1>:183 stable/stein>:46 #: stable/stein>:99 stable/stein>:147 stable/stein>:182 stable/stein>:274 #: stable/stein>:304 stable/stein>:325 stable/stein>:355 stable/stein>:436 #: stable/stein>:903 stable/train>:62 stable/train>:143 stable/train>:250 #: stable/train>:362 stable/train>:536 stable/train>:730 stable/train>:781 #: stable/train>:858 stable/train>:887 stable/train>:1641 stable/ussuri>:74 #: stable/ussuri>:128 stable/ussuri>:154 stable/ussuri>:185 stable/ussuri>:268 #: stable/ussuri>:360 stable/ussuri>:586 stable/ussuri>:780 stable/ussuri>:1364 #: stable/zed>:10 stable/zed>:112 stable/zed>:159 stable/zed>:283 #: stable/zed>:524 victoria-eom>:62 victoria-eom>:109 victoria-eom>:148 #: victoria-eom>:253 victoria-eom>:448 victoria-eom>:523 victoria-eom>:916 #: wallaby-eom>:62 wallaby-eom>:121 wallaby-eom>:188 wallaby-eom>:327 #: wallaby-eom>:844 xena-eom>:73 xena-eom>:100 xena-eom>:209 xena-eom>:273 #: xena-eom>:310 xena-eom>:886 yoga-eom>:10 yoga-eom>:31 yoga-eom>:155 #: yoga-eom>:214 yoga-eom>:316 yoga-eom>:417 yoga-eom>:759 msgid "Bug Fixes" msgstr "" #: ../../:66 current stable/2024.1>:220 msgid "" "By default, ``snapvx_unlink_symforce`` is ``False``. Use extreme caution " "with this option. If used when a link is copy in progress or when a restore " "is restore in progress, this will cause an incomplete copy and data on the " "copy target would not be usable." msgstr "" #: ../../:874 stable/ussuri>:1461 msgid "" "Catch argument exceptions when configuring multiattach for rbd volumes. This " "allows multiattach images with flags already set to continue instead of " "raising an exception and failing." msgstr "" #: ../../:186 msgid "" "Ceph backup driver `Bug #1895035 `_: Fixed restore full backups to non RBD volumes." msgstr "" #: ../../:242 wallaby-eom>:788 msgid "" "Ceph/RBD volume backends will now assume exclusive cinder pools, as if they " "had ``rbd_exclusive_cinder_pool = true`` in their configuration." msgstr "" #: ../../:336 wallaby-eom>:1084 msgid "" "Ceph/RBD: Fix Cinder becoming non-responsive and stats gathering taking " "longer that its period. (`Related-Bug #1704106 `_)" msgstr "" #: ../../:331 wallaby-eom>:1079 msgid "" "Ceph/RBD: Fix cinder taking a long time to start for Ceph/RBD backends. " "(`Related-Bug #1704106 `_)" msgstr "" #: ../../:886 msgid "" "Cinder TSM Backup Driver is deprecated and will be removed in Wallaby " "release." msgstr "" #: ../../:661 msgid "" "Cinder and Nova use the os-brick library to facilitate connections to " "volumes. The ``nvmeof`` os-brick connector has been refactored over the " "past few development cycles. In between the time of the Yoga os-brick " "release (os-brick 5.2.0) and this cinder release, several bugs were " "discovered in this connector. You can find these in the bug tracker with " "this query:" msgstr "" #: ../../:157 stable/train>:571 stable/ussuri>:620 msgid "" "Cinder no longer allows an incremental backup to be created while having the " "parent backup in another project." msgstr "" #: ../../:801 msgid "Cinder now requires LVM version 2.02.107 or newer." msgstr "" #: ../../:638 msgid "" "Cinder now stores the format of the backing file (raw or qcow2), for FS " "backends, in the volume admin metadata and includes the format in the " "connection_info returned in the Attachments API. Previously cinder tried to " "introspect the format, and under some circumstances, an incorrect format " "would be deduced. This will still be the case for legacy volumes. Explicitly " "storing the format will avoid this issue for newly created volumes. `See " "spec for more info `_." msgstr "" #: ../../:142 msgid "" "Cinder now uses the RBD trash functionality to handle some volume deletions. " "Therefore, deployments must either a) enable scheduled RBD trash purging on " "the RBD backend or b) enable the Cinder RBD driver's " "enable_deferred_deletion option to have Cinder purge the RBD trash. This " "adds the new configuration option 'rbd_concurrent_flatten_operations', which " "limits how many RBD flattens the driver will run simultaneously. This can be " "used to prevent flatten operations from consuming too much I/O capacity on " "the Ceph cluster. It defaults to 3." msgstr "" #: ../../:937 msgid "" "Cinder now will return 415 (HTTPUnsupportedMediaType) when any unsupported " "content type is specified in request header." msgstr "" #: ../../:950 msgid "" "Cinder validates proposed Glance store identifiers by contacting Glance at " "the time the ``image_service:store_id`` is added to a volume-type's extra-" "specs. Thus the Image Service API must be available when a volume-type is " "updated." msgstr "" #: ../../:73 current stable/2024.1>:227 msgid "Clone a volume" msgstr "" #: ../../:423 msgid "" "Configuration option ``iscsi_secondary_ip_addresses`` is deprecated in favor " "of ``target_secondary_ip_addresses`` to follow the same naming convention of " "``target_ip_address``." msgstr "" #: ../../:74 current stable/2024.1>:228 msgid "Create a volume from a snapshot" msgstr "" #: ../../:327 msgid "" "Create a volume: ``POST /v3/volumes`` with an ``imageRef`` attribute in the " "request body. This will result in a 202 (Accepted) response, but if the " "image's ``disk_format`` would require conversion to be written to the " "volume, the volume will go to ``error`` status." msgstr "" #: ../../:78 current stable/2024.1>:232 msgid "Create generic volume group from source" msgstr "" #: ../../:1103 msgid "" "Create group from group snapshot (`#1867906 `_)" msgstr "" #: ../../:75 current stable/2024.1>:229 msgid "Create volume snapshots" msgstr "" #: ../../:719 msgid "" "Creating a volume of an encrypted volume type from an image in the Image " "service (Glance) using the generic NFS driver results in an unusable volume. " " The cinder team is working on a solution which is expected to be backported " "to a future release in the Xena series. The issue is being tracked as `Bug " "#1888680 `_." msgstr "" #: ../../:626 msgid "" "Creating a volume of an encrypted volume type from an image in the Image " "service (Glance) using the generic NFS driver results in an unusable volume. " " The cinder team is working on a solution which is expected to be backported " "to a future release in the Yoga series. The issue is being tracked as `Bug " "#1888680 `_." msgstr "" #: ../../:121 stable/2023.2>:139 stable/zed>:83 #: xena-eom>:44 yoga-eom>:126 msgid "Critical Issues" msgstr "" #: ../../:1408 msgid "" "Datera driver: fixes in retyping / QoS, Glance interoperability, fast " "clones, IP pools, volume templates and initiators, unicode character " "support, scalability issues" msgstr "" #: ../../:76 current stable/2024.1>:230 msgid "Delete volume snapshots" msgstr "" #: ../../:1152 msgid "" "Dell EMC PS Series storage driver is not supported and removed starting from " "the Ussuri release. It was marked as deprecated in the Train release." msgstr "" #: ../../:379 yoga-eom>:188 msgid "" "Dell EMC PowerFlex driver: Report trimming/discard support to Nova and " "Cinder on thin volumes that don't have snapshots. Not doing trim on volumes " "with snapshots is the vendor's recommendation, but can be overriden with the " "``report_discard_supported`` configuration option." msgstr "" #: ../../:336 msgid "" "Dell EMC PowerMax driver `bug #1980870 `_: Fixed potential deadlock when moving volumes between " "Storage Groups." msgstr "" #: ../../:893 msgid "" "Dell EMC PowerMax driver now faciliates the user to override the short host " "name and port group name seen in PowerMax masking view and storage view " "terminology. This means the user can give more meaningful names, especially " "when the short host name exceeds 16 characters and the port group name " "exceeds 12 characters, which is the condition where the driver truncates " "these values." msgstr "" #: ../../:887 msgid "" "Dell EMC PowerMax driver now supports Unisphere storage group and array " "tagging to allow the user to specify a user defined tag to facilitate easy " "access and classification." msgstr "" #: ../../:41 msgid "" "Dell EMC PowerMax driver: Added SRDF ``powermax:disable_protected_snap`` " "volume-type extra-spec property for the purpose of avoiding overconsumption " "on both source and target storage arrays." msgstr "" #: ../../:374 yoga-eom>:183 msgid "" "Dell EMC PowerMax driver: Report trimming/discard support to Nova and Cinder." "" msgstr "" #: ../../:369 yoga-eom>:178 msgid "" "Dell EMC PowerStore driver: Report trimming/discard support to Nova and " "Cinder." msgstr "" #: ../../:592 msgid "Dell EMC PowerVault ME Series storage arrays are now supported." msgstr "" #: ../../:388 #: stable/train>:1738 msgid "" "Dell EMC SC Driver: Fixes `bug 1822229 `__ to handle the volume mappings in the backend when a volume " "is attached to multiple instances on the same host." msgstr "" #: ../../:907 msgid "" "Dell EMC Scale IO Driver: Fixes `bug 1560649 ` for creating volumes with sizes greater than that of " "the original snapshot." msgstr "" #: ../../:1402 msgid "" "Dell EMC ScaleIO has been rebranded to VxFlex OS. The drivers ``cinder." "volume.drivers.dell_emc.scaleio.driver.ScaleIODriver`` will now be updated " "to ``cinder.volume.drivers.dell_emc.vxflexos.driver.VxFlexOSDriver`` in " "cinder.conf. Driver configuration options that start with ``sio`` should " "also be updated to ``vxflexos``. Existing sio configuration options will " "continue to work but will be removed in the V release. Online documentation " "will also change to reflect these changes." msgstr "" #: ../../:961 msgid "" "Dell EMC Unity Driver: Added consistency group replication support. The " "storops library version 1.2.3 or newer is required." msgstr "" #: ../../:564 msgid "Dell EMC Unity Driver: Added storage-assisted migration support." msgstr "" #: ../../:1087 msgid "Dell EMC Unity Driver: Added volume replication support." msgstr "" #: ../../:1072 msgid "" "Dell EMC Unity driver: Add consistent group support. Users could create a " "group type supporting consistent groups with specification " "`'consistent_group_snapshot_enabled': True`, then any groups created of " "that group type are consistent groups, otherwise they are generic groups. " "The supported operations are: create/delete consistent groups, add volumes " "to and remove volumes from consistent groups, create/delete consistent group " "snapshots, create consistent groups from snapshots, clone consistent groups." msgstr "" #: ../../:966 msgid "" "Dell EMC Unity driver: Add efficient retype support when new type uses the " "same Unity device." msgstr "" #: ../../:970 msgid "" "Dell EMC Unity driver: Add tiering policy configuration support for volume." msgstr "" #: ../../:577 msgid "" "Dell EMC VMAX driver has added support for failover to second instance of " "Unisphere." msgstr "" #: ../../:804 msgid "" "Dell EMC VMAX has been rebranded to PowerMax. The drivers ``cinder.volume." "drivers.dell_emc.vmax.iscsi.VMAXISCSIDriver`` and ``cinder.volume.drivers." "dell_emc.vmax.fc.VMAXFCDriver`` will now be updated to ``cinder.volume." "drivers.dell_emc.powermax. iscsi.PowerMaxISCSIDriver`` and ``cinder.volume." "drivers.dell_emc. powermax.fc.PowerMaxFCDriver`` respectively in cinder.conf." " Driver configuration options that start with ``vmax`` should also be " "updated to ``powermax``. Existing vmax configuration options will continue " "to work but will be removed in the Train release. Online documentation will " "also change to reflect these changes." msgstr "" #: ../../:329 stable/train>:1755 msgid "" "Dell EMC VNX Cinder Driver: Fixes `bug 1794646 `__ to delete the LUN from the VNX storage. Because a " "temporary snapshot is created from the LUN during creating a volume from a " "snapshot and isn't deleted, the LUN cannot be deleted before its snapshot is " "deleted. The fix makes sure the temp snapshot is deleted." msgstr "" #: ../../:1749 msgid "" "Dell EMC VNX Driver: Fix `bug 1796825 `__, adding an option named `vnx_async_migrate` to accept the " "default setting for async migration." msgstr "" #: ../../:974 msgid "" "Dell EMC VNX Driver: Fixes `bug 1817385 `__ to make sure the sg can be created again after it was " "destroyed under `destroy_empty_storage_group` setting to `True`." msgstr "" #: ../../:256 stable/train>:763 stable/ussuri>:771 #: victoria-eom>:897 msgid "" "Dell EMC VxFlex OS driver: This release contains a fix for `Bug #1823200 " "`_. See `OSSN-0086 `_ for details." msgstr "" #: ../../:852 msgid "" "Dell EMC VxFlex OS has been rebranded to PowerFlex. The driver ``cinder." "volume.drivers.dell_emc.vxflexos.driver.VxFlexOSDriver`` has been renamed to " "``cinder.volume.drivers.dell_emc.powerflex.driver.PowerFlexDriver``. " "Although in this release the volume manager will recognize the old driver " "name, that functionality will be removed in the Wallaby release, and thus we " "recommend that you update the driver name in ``cinder.conf`` at your " "earliest convenience." msgstr "" #: ../../:14 stable/2023.2>:237 msgid "" "Dell PowerFlex driver `bug #1998136 `_: When using self signed certificates, the option sent to os-brick " "via the connection_properties was not correctly handled. It has now been " "fixed by adding the 'verify_certificate' and 'certificate_path' to the " "driver when initializing the connection." msgstr "" #: ../../:34 msgid "" "Dell PowerFlex driver: Enabled cinder volume active/active support. This " "allows users to configure Dell PowerFlex backends in cinder clustered " "environments." msgstr "" #: ../../:56 current stable/2024.1>:210 msgid "" "Dell PowerMax Driver `Bug #2045230 `_: Fixed the issue that Dell PowerMax SnapVx link fails as the " "linked device is not yet fully defined." msgstr "" #: ../../:35 current stable/2024.1>:117 msgid "" "Dell PowerMax Driver: introduced a new configuration option, " "``snapvx_unlink_symforce``, to address Bug #2045230. See the Bug Fixes " "section for details." msgstr "" #: ../../:14 msgid "" "Dell PowerMax driver `bug #2033398 `_: Reduced the risk of failures when doing online migration. This " "change is to speed up the deletion of a volume which doesn't require to " "rename the volume prior to delete it. This removal will allow to save 15s in " "terms of operation time and avoid unnecessary pausing time during migration." msgstr "" #: ../../:47 current stable/2024.1>:14 msgid "" "Dell PowerMax driver `bug #2034937 `_: Fixed" msgstr "" #: ../../:259 msgid "" "Dell PowerMax driver `bug #2051828 `_: The driver only recognized 10.0 as being Unisphere 10 and would " "try to use 9.2 for Unisphere 10.x (where x > 0), but now it correctly " "recognizes 10.x as being Unisphere 10." msgstr "" #: ../../:365 msgid "Dell PowerMax driver now supports Unisphere for PowerMax 10.0" msgstr "" #: ../../:93 msgid "" "Dell PowerMax driver: Enabled support for Active/Active to both FC and iSCSI " "driver. This allows users to configure Dell PowerMax backends in clustered " "environments." msgstr "" #: ../../:449 msgid "Dell PowerStore driver: Added NVMe-TCP support." msgstr "" #: ../../:352 msgid "Dell PowerStore: Added NFS storage driver." msgstr "" #: ../../:127 stable/2024.1>:162 msgid "Dell SC Series Storage Driver (iSCSI, FC)" msgstr "" #: ../../:128 stable/2024.1>:163 msgid "Dell VNX Storage Driver (FC, iSCSI)" msgstr "" #: ../../:129 stable/2024.1>:164 msgid "Dell XtremeIO Storage Driver (iSCSI, FC)" msgstr "" #: ../../:1673 msgid "" "DellEMC Unity: Fix bug `1825469 `_. The fix enables the ``force_delete_lun_in_storagegroup`` option " "to ``True`` by default, which makes sure that luns can deleted even when " "they are still in storage groups." msgstr "" #: ../../:1196 msgid "" "DellEMC Unity: The fix of bug `1825469 `_ changes the default value of the " "``force_delete_lun_in_storagegroup`` option from ``False`` to ``True``, " "which means luns will always be force deleted after upgrade." msgstr "" #: ../../:517 msgid "" "Deprecate NetApp NFS option `netapp_copyoffload_tool_path`. The tool is no " "longer available for downloading." msgstr "" #: ../../:785 msgid "" "Deprecated config option `query_volume_filters` is removed now. Please, use " "config file described in resource_query_filters_file to configure allowed " "volume filters." msgstr "" #: ../../:419 stable/2024.1>:155 #: stable/stein>:839 stable/train>:1483 stable/ussuri>:1254 stable/zed>:513 #: victoria-eom>:882 wallaby-eom>:819 xena-eom>:836 yoga-eom>:747 msgid "Deprecation Notes" msgstr "" #: ../../:125 stable/2023.2>:143 stable/zed>:87 #: xena-eom>:48 yoga-eom>:130 msgid "" "Detaching volumes will fail if Nova is not `configured to send service " "tokens `_, please read the upgrade section for more information. " "(`Bug #2004555 `_)." msgstr "" #: ../../:733 msgid "" "Detection of whether a URL includes a project_id is based on the value of a " "new ``project_id_regex`` option. The default value matches UUIDs created by " "keystone." msgstr "" #: ../../:469 msgid "" "Due to `Bug #1893107 `_, " "under specific circumstances, some operators may need to take actions " "outside the normal upgrade process to upgrade from Train to Ussuri. See the " "\"Upgrade Notes\" and \"Bug Fixes\" sections of these release notes for more " "details." msgstr "" #: ../../:263 stable/train>:770 msgid "" "Due to `OSSN-0085 `_: Cinder " "configuration option can leak secret key from Ceph backend, deployers using " "the ``rbd_keyring_conf`` option are advised to stop using it immediately. " "The option has been deprecated for removal as of Ussuri and will be removed " "in the Victoria development cycle." msgstr "" #: ../../:1353 msgid "" "Due to `OSSN-0085 `_: Cinder " "configuration option can leak secret key from Ceph backend, deployers using " "the ``rbd_keyring_conf`` option are advised to stop using it immediately. " "The option has been deprecated for removal early in the 'V' development " "cycle." msgstr "" #: ../../:798 msgid "" "Due to the fix for `Bug #1740950 `_, the ``host_name`` field in any object in the ``attachments`` " "array of the volume detail response is populated only when the call is made " "in an administrative context. Otherwise, its value is the JSON ``null`` " "value. This is consistent with prior API behavior, as it has always been " "possible for the value of that field to be ``null``." msgstr "" #: ../../:941 msgid "Enabled multiattach capability for hpe3par driver." msgstr "" #: ../../:263 msgid "Examples:" msgstr "" #: ../../:861 msgid "" "Existing vxFlex OS configuration options, whose usage was DEPRECATED in the " "Stein release, will no longer be recognized in this release. Thus all driver " "configuration options that start with ``vxflexos`` must be updated to " "``powerflex`` in your ``cinder.conf`` before you deploy this release." msgstr "" #: ../../:501 msgid "" "Expanded volume transfer information. Starting with microversion 3.57, " "``source_project_id``, ``destination_project_id``, and ``accepted`` fields " "will be returned in the response of the volume transfer create, show, and " "list calls." msgstr "" #: ../../:240 msgid "FC driver: 64" msgstr "" #: ../../:265 msgid "FC driver: ``HBSD-{host}-{wwn}``" msgstr "" #: ../../:235 msgid "FC driver: ``{wwn}``" msgstr "" #: ../../:672 msgid "" "First, some background. The Block Storage API supports the creation of " "volumes in gibibyte (GiB) units. When a volume of a non-encrypted volume " "type of size *n* is created, the volume contains *n* GiB of usable space. " "When a volume of an encrypted type is requested, however, the volume " "contains less than *n* GiB of usable space because the encryption metadata " "that must be stored within that volume in order for the volume to be usable " "consumes an amount of the otherwise usable space." msgstr "" #: ../../:370 stable/train>:1667 msgid "" "Fix DetachedInstanceError is not bound to a Session for VolumeAttachments. " "This affected VolumeList.get_all, and could make a service fail on startup " "and make it stay in down state." msgstr "" #: ../../:191 stable/train>:654 stable/ussuri>:693 msgid "" "Fix HPE 3PAR driver issue where volumes that were live migrated to it would " "end up being inaccessible. We would no longer be able to use the volume for " "any operation, such as attach, detach, delete, snapshot, etc. (bug 1697422)" msgstr "" #: ../../:709 msgid "" "Fix NetApp iSCSI and FC driver issues with custom initiator groups. (bug " "1697490)." msgstr "" #: ../../:963 msgid "" "Fix SolidFire free_capacity_gb reporting and also reports " "thin_provisioning_support=True. This allow the use of Cinder scheduler's " "parameters for thin provisioning in the SolidFire plataform." msgstr "" #: ../../:559 stable/ussuri>:609 msgid "" "Fix `AttributeError` on the Brocade ZM driver when using setting REST_HTTP " "or REST_HTTPS as the fc_southbound_protocol option and an exception is " "raised by the client (Bug #1866860)." msgstr "" #: ../../:549 stable/ussuri>:599 msgid "" "Fix `UnboundLocalError` on the Brocade lookup driver on southbound client " "creation failure during the device mapping retrieval (Bug #1888550)." msgstr "" #: ../../:661 stable/ussuri>:700 msgid "" "Fix ``unique_fqdn_network`` configuration option for the Kaminario driver, " "as it was being ignored when defined in the driver section, which used to " "work. (Bug #1886042)." msgstr "" #: ../../:103 stable/train>:582 stable/ussuri>:626 msgid "" "Fix bug `#1874134 `_, " "allowing an iSCSI or FCP volume to be extended to a size up to 16TB " "regardless of its original size, even if it's attached to an instance." msgstr "" #: ../../:359 stable/train>:1656 msgid "" "Fix python 3 incompatibility issues preventing NetApp cDOT driver from " "generating EMS logging messages (Bug #1833115)." msgstr "" #: ../../:969 msgid "" "Fix python3 imcompability issues and make SolidFire driver fully compatible " "with python3." msgstr "" #: ../../:117 stable/train>:675 stable/ussuri>:717 msgid "" "Fix revert to snapshot not working for non admin users when using the " "snapshot's name (bug #1889758)." msgstr "" #: ../../:198 stable/train>:810 stable/ussuri>:804 msgid "" "Fix the HPE 3PAR driver's attempt to rename the backend volume after it was " "migrated. If the original volume resides on the same 3PAR backend then the " "pre and post migration volume names are swapped. Otherwise, the newly " "migrated volume is renamed to match the original name. (bug 1858119)" msgstr "" #: ../../:577 stable/ussuri>:1387 msgid "" "Fix volume migration fails in the same ceph RBD pool. `Bug 1871524 `__." msgstr "" #: ../../:1703 msgid "" "Fixed HPE MSA driver issue where a multi-attached volume could be unmapped " "while still in use." msgstr "" #: ../../:1714 msgid "" "Fixed Lenovo driver issue where a multi-attached volume could be unmapped " "while still in use." msgstr "" #: ../../:951 msgid "" "Fixed NetApp SolidFire bug that avoided multiatached volumes to be deleted." msgstr "" #: ../../:366 stable/ussuri>:615 msgid "" "Fixed `bug #1859652 `_ to " "allow retyping an attached volume to SolidFire." msgstr "" #: ../../:538 msgid "" "Fixed a CHAP authentication issue while trying to attach an iSCSI volume " "using the NetApp ONTAP driver. Please refer to the `Launchpad bug #1914639 " "`_ for more details." msgstr "" #: ../../:927 msgid "" "Fixed a bug which could create volumes with invalid content in case of " "unhandled errors from glance client (Bug `#1799221 `_)." msgstr "" #: ../../:1134 msgid "" "Fixed a problem with volume retype not honoring the existing volume's " "Availability Zone if one isn't specified." msgstr "" #: ../../:914 msgid "" "Fixed group availability zone-backend host mismatch [`Bug 1773446 `_]." msgstr "" #: ../../:314 #: stable/train>:1745 msgid "" "Fixed issue where all Ceph RBD backups would be incremental after the first " "one. The driver now honors whether ``--incremental`` is specified or not." msgstr "" #: ../../:947 msgid "" "Fixed support for IPv6 on management and data paths for NFS, iSCSI and FCP " "NetApp ONTAP drivers." msgstr "" #: ../../:113 wallaby-eom>:352 xena-eom>:1060 msgid "" "Fixed the schema validation for attachment create API to make instance uuid " "an optional field. It had mistakenly been defined as a required field when " "schema validation was added in an earlier release. Also updated the schema " "to allow specification of the ``mode`` parameter, which has been available " "since microversion >= 3.54, but which was not recognized as a legitimate " "request field." msgstr "" #: ../../:1098 msgid "Fixed volume group action in Active/Active HA deployment:" msgstr "" #: ../../:955 msgid "" "Fixes a bug in NetApp SolidFire where the deletion of group snapshots was " "failing." msgstr "" #: ../../:1403 msgid "" "Fixes a bug that could cause mount failures with the Quobyte driver if the " "quobyte_volume_url setting was changed in a running system." msgstr "" #: ../../:1368 msgid "" "Fixes a bug that prevented creation of Quobyte volumes from snapshots during " "snapshot backups. This now allows backing up volumes with existing snapshots." " Partially fixes `bug 1703405 `_ ." msgstr "" #: ../../:364 stable/train>:1661 msgid "" "Fixes a bug that prevented distributed file system drivers from creating " "snapshots during volume clone operations (NFS, WindowsSMBFS, VZstorage and " "Quobyte drivers). Fixing this allows creating snapshot based backups." msgstr "" #: ../../:959 msgid "Fixes force_detach behavior for volumes in NetApp SolidFire driver." msgstr "" #: ../../:746 wallaby-eom>:1252 msgid "" "For a given OpenStack release, Cinder supports the current Ceph active " "stable releases plus the two prior releases." msgstr "" #: ../../:1287 msgid "" "For an example of distribution-specific information about cgroups, see " "`OpenStack and cgroups v1 `_ in the Debian 11 " "(\"bullseye\") release notes." msgstr "" #: ../../:748 wallaby-eom>:1254 msgid "" "For any OpenStack release, it is expected that the versions of the Ceph " "client and server are in alignment." msgstr "" #: ../../:1051 msgid "" "For completeness, here is the list of drivers first marked unsupported in " "the Ussuri release. See the \"Deprecation Notes\" section of this document " "for details." msgstr "" #: ../../:37 stable/train>:232 stable/ussuri>:259 #: victoria-eom>:439 wallaby-eom>:781 msgid "" "For more information about the cinder policy configuration file, see the " "`policy.yaml `_ section of the Cinder Configuration " "Guide." msgstr "" #: ../../:847 xena-eom>:863 msgid "" "For more information, see the 'New Features' section of this document and " "`Policy Personas and Permissions `_ in the `Cinder Service " "Configuration Guide`." msgstr "" #: ../../:1280 msgid "For more information:" msgstr "" #: ../../:54 msgid "" "For security reasons (`Bug #2004555 `_) manually deleting an attachment, manually doing the ``os-" "terminate_connection`` ``os-detach`` or ``os-force_detach`` actions will no " "longer be allowed unless the request is coming from another OpenStack " "service on behalf of a user." msgstr "" #: ../../:91 stable/2023.2>:104 xena-eom>:14 #: yoga-eom>:96 msgid "" "For security reasons (`Bug #2004555 `_) manually deleting an attachment, manually doing the ``os-" "terminate_connection``, ``os-detach`` or ``os-force_detach`` actions will no " "longer be allowed in most cases unless the request is coming from another " "OpenStack service on behalf of a user." msgstr "" #: ../../:1033 msgid "" "For the convenience of operators, the `unsupported driver removal policy " "`_ was changed during the Ussuri development cycle to allow " "unsupported drivers to remain in the Cinder source code repository at the " "discretion of the Cinder team (basically, this means the vendor has not " "explicitly declared the driver EOL or the vendor has expressed interest in " "getting the third-party CI system working again). Be aware, however, that " "such drivers are subject to immediate removal if they begin failing the " "general Cinder gating tests." msgstr "" #: ../../:666 msgid "" "For the most part, users are happy with the cinder feature `Volume " "encryption supported by the key manager `_. There are, " "however, some edge cases that have revealed bugs that you and your users " "should be aware of." msgstr "" #: ../../:874 msgid "Fujitsu Driver: Added multiple pools support." msgstr "" #: ../../:46 msgid "Fujitsu ETERNUS DX driver: Added support for QoS" msgstr "" #: ../../:65 msgid "" "Fujitsu ETERNUS DX driver: Added support to extend a volume on RAID Group " "using CLI." msgstr "" #: ../../:14 current msgid "Fujitsu ETERNUS DX driver: Improve volume deletion" msgstr "" #: ../../:14 victoria-eom>:141 wallaby-eom>:600 msgid "" "HPE 3PAR Driver: Add support of iSCSI driver for Primera 4.2 or higher " "versions." msgstr "" #: ../../:747 msgid "" "HPE 3PAR driver `Bug #1819903 `_: Fixed: umanaged volumes & snapshots missing from cinder " "manageable-list." msgstr "" #: ../../:920 msgid "" "HPE 3PAR driver `Bug #1940069 `_: Fixed issue of connection rejected by reusing existing session." msgstr "" #: ../../:752 xena-eom>:242 yoga-eom>:447 msgid "" "HPE 3PAR driver `Bug #1958122 `_: Fixed issue of multi-detach operation in multi host environment." msgstr "" #: ../../:252 msgid "" "HPE 3PAR driver `Bug #1994521 `_: Fixed: While performing a delete snapshot (s1) operation, the " "volumes (v2) dependent on the snapshot (s1) are converted to base volumes. " "This operation fails if these dependent volumes (v2) have their own " "dependent snapshots (s2). The errors during the failure were vague and not " "helpful. With this release, we added conditions to fail this operation early " "and also added useful error message." msgstr "" #: ../../:273 msgid "" "HPE 3PAR driver `Bug #2015034 `_: Added handling for VLAN iscsi IPs in the 3PAR iSCSI driver." msgstr "" #: ../../:69 stable/2023.2>:247 msgid "" "HPE 3PAR driver `Bug #2015746 `_: Fixed: minor code changes to work with new wsapi." msgstr "" #: ../../:262 msgid "" "HPE 3PAR driver `Bug #2023253 `_: Fixed: Handle error during retype of volume without comment" msgstr "" #: ../../:321 msgid "" "HPE 3PAR driver `Bug #2026718 `_: Fixed: With this patch, added logic to fetch correct volume name " "on 3par (osv_name), rcg_name and vvset_name (for particular scenarios); so " "that volumes can be identified and deleted from 3par." msgstr "" #: ../../:26 stable/2024.1>:310 msgid "" "HPE 3PAR driver `Bug #2045411 `_: Added support for ipv6 address in the 3PAR iSCSI driver." msgstr "" #: ../../:215 msgid "" "HPE 3PAR driver `bug #2008931 `_: Fixed issue when performing migrate volume operation when " "`comment` attribute is missing from the volume." msgstr "" #: ../../:267 msgid "" "HPE 3PAR driver `bug #2018994 `_: Fixed: use small QoS Latency value (less than 1)" msgstr "" #: ../../:99 current stable/2024.1>:315 msgid "" "HPE 3PAR driver `bug #2021941 `_: Fixed: Now clone of replicated volume can be created" msgstr "" #: ../../:444 stable/ussuri>:1006 msgid "" "HPE 3PAR driver now supports networks with duplicated FQDNs via " "configuration option `unique_fqdn_network` so attaching in these networks " "will work (bug #1834695)." msgstr "" #: ../../:818 stable/ussuri>:1441 msgid "" "HPE 3PAR driver: The detach issue for multiattach capability (`Bug 1834660 " "`_) was fixed in the Cinder " "15.0.0 (Train) release, but due to an oversight, the fix has not been " "announced until now." msgstr "" #: ../../:1238 msgid "" "HPE 3PAR: Documented that existing driver supports the new Alletra 9k " "backend. HPE Alletra 9k is newer version of existing HPE Primera backend." msgstr "" #: ../../:707 msgid "" "HPE LeftHand config options ``hplefthand_api_url``, ``hplefthand_username``, " "``hplefthand_password``, ``hplefthand_clustername``, " "``hplefthand_iscsi_chap_enabled``, and ``hplefthand_debug`` were deprecated " "in the Mitaka release and have now been removed. The corresponding " "``hpelefthand_api_url``, ``hpelefthand_username``, ``hpelefthand_password``, " "``hpelefthand_clustername``, ``hpelefthand_iscsi_chap_enabled``, and " "``hpelefthand_debug`` should be used instead." msgstr "" #: ../../:1359 stable/ussuri>:1145 msgid "" "HPE Nimble Storage drivers had been previously marked unsupported. Testing " "requirements have been addressed and they are now fully supported again. HPE " "Nimble Storage drivers allow cinder to manage volumes both in iSCSI and FC " "environment." msgstr "" #: ../../:298 msgid "" "HPE XP and NEC V driver `bug #2012515 `_: Fixed to use correct Host group name." msgstr "" #: ../../:1144 wallaby-eom>:1122 msgid "" "HPMSA driver: The HPE MSA driver was updated to avoid using deprecated " "command syntax that has been removed in the latest version of the MSA API. " "This is required to support the newest firmware in the MSA 2060/1060." msgstr "" #: ../../:1110 msgid "" "Hitachi driver `bug #1908792 `_: Fix for Hitachi driver allowing delete_volume after " "create_cloned_volume." msgstr "" #: ../../:741 yoga-eom>:371 msgid "" "Hitachi driver `bug #1989176 `_: Fixed Hitachi driver to output a message for resource lock " "correctly." msgstr "" #: ../../:304 msgid "" "Hitachi driver `bug #2011810 `_: Fixed to use correct pool number for secondary storage on GAD " "environment." msgstr "" #: ../../:291 msgid "" "Hitachi driver `bug #2024418 `_: Fixed to raise correct exception when volume is busy while " "performing delete volume operation." msgstr "" #: ../../:211 msgid "" "Hitachi driver: Add a config option ``hitachi_group_name_format`` for " "hostgroup name format." msgstr "" #: ../../:531 msgid "" "Hitachi driver: Support AIX as host OS type. When running ``cinder " "attachment-create`` command with the option ``--ostype aix``, ``AIX`` is set " "as host OS type." msgstr "" #: ../../:201 msgid "" "Hitachi driver: Support Global-Active Device (GAD) volume. GAD is a one of " "Hitachi storage fucntion uses volume replication to provide a high-" "availability environment for hosts across storage systems and sites. New " "properties will be added in configuration. ``hbsd:topology`` sets to " "``active_active_mirror_volumex`` would specify a GAD volume. " "``hitachi_mirror_xxx`` parameters would specify a secondary storage for GAD " "volume." msgstr "" #: ../../:474 msgid "Hitachi driver: Add Cinder generic volume groups." msgstr "" #: ../../:394 msgid "" "Hitachi driver: Add a feature ``Port Scheduler``. This feature is enabled " "when specifying ``True`` for the parameter ``hitachi_port_scheduler``. When " "this feature is enabled and an attach request is received, the active WWNs " "that are obtained by Fibre Channel Zone Manager will be distributed and " "registered to the host groups of each port of the storage system. To use " "this feature, specify ``True`` for both parameters ``hitachi_group_request`` " "and ``hitachi_rest_name_only_discovery``. If you specify ``False`` or use " "default value for the ``hitachi_rest_name_only_discovery``, it will take a " "long time to attach volume, by seeking the host group for all specified " "ports. This feature is supported on Fibre Channel only." msgstr "" #: ../../:537 msgid "" "Hitachi driver: Add target port assignment. Defining particular ports in " "extra spec ``hbsd:target_ports`` determines which of the ports specified by " "the ``hitachi_target_ports`` or the ``hitachi_compute_target_ports`` " "parameters are used to create LUN paths during volume attach operations for " "each volume type." msgstr "" #: ../../:281 msgid "" "Hitachi driver: Additionally support following storages, Hitachi VSP E590, " "Hitachi VSP E790 and Hitachi VSP E1090." msgstr "" #: ../../:274 msgid "" "Hitachi driver: Support data deduplication and compression, by storage " "assist. The feature can be worked, if user enable deduplication and " "compression for the DP-pool, by Configuration Manager REST API, and set the " "extra spec ``hbsd:capacity_saving`` to ``deduplication_compression``" msgstr "" #: ../../:286 msgid "" "Hitachi driver: Update retype to different pool and support storage assisted " "migration. Storage assisted migration feature is also used when retype a " "volume, which doesn't have any snapshots, to different pool." msgstr "" #: ../../:611 msgid "" "Hitachi, NEC V, HPE XP drivers `bug #2004140 `_: Fixed ``KeyError`` when a backend is down." msgstr "" #: ../../:844 msgid "Huawei Cinder Driver Support Dorado V6 Storage.(iSCSI, FC)" msgstr "" #: ../../:867 msgid "" "IBM DS8000 Driver `Bug #1884030 `_: Support for volume_name_template configuration option." msgstr "" #: ../../:974 msgid "" "IBM DS8000 Driver `Bug #1903648 `_: Fix os_type compatability and hostname template issue." msgstr "" #: ../../:576 msgid "" "IBM DS8000 Driver `Bug #1951046 `_: Fixed detach issue for multi-attach volumes. Detach the volume " "without deleting the host until attachment count is zero." msgstr "" #: ../../:464 msgid "IBM DS8000 Driver: Add support for revert-to-snapshot operation." msgstr "" #: ../../:1108 msgid "" "IBM DS8000 drivers had been previously marked unsupported. Testing " "requirements have been addressed and they are now fully supported again. IBM " "DS8000 drivers allow Cinder to manage volumes in FC environment." msgstr "" #: ../../:1046 stable/ussuri>:1189 #: stable/ussuri>:1319 msgid "IBM FlashSystem drivers: FC and iSCSI" msgstr "" #: ../../:1083 msgid "" "IBM GPFS drivers had been previously marked unsupported. Testing " "requirements have been addressed and they are now fully supported again. IBM " "GPFS drivers allow cinder to manage volumes." msgstr "" #: ../../:809 msgid "" "IBM Spectrum Virtualize Family (previously known as Storwize) driver cannot " "delete volume which has host mapping in some rare cases while code_level of " "IBM Spectrum Virtualize Family storage lower than 7.7.0.0. Please upgrade to " "latest code to avoid this kind of issue." msgstr "" #: ../../:1114 msgid "" "IBM Spectrum Virtualize Family (previously known as Storwize) drivers had " "been previously marked unsupported. Testing requirements have been addressed " "and they are now fully supported again. IBM Spectrum Virtualize Family " "drivers allow Cinder to manage volumes both in iSCSI and FC environments." msgstr "" #: ../../:933 msgid "" "IBM Spectrum Virtualize Family `Bug #1896214 `_: Fixed issues in change_vdisk_iogrp. During retyping " "a volume between I/O groups, if addvdiskaccess fails an exception is raised " "and if movevdisk fails rmvdiskaccess should be done for new I/O group before " "failing the retype operation." msgstr "" #: ../../:942 msgid "" "IBM Spectrum Virtualize Family `Bug #1898746 `_: Fixed issue regarding host-failover and group-" "failover which impacts storage back-end performance." msgstr "" #: ../../:1002 msgid "" "IBM Spectrum Virtualize Family `Bug #1905988 `_: Fixed volume IOPS throttling issue with a new option " "to set volume IOPS based on volume size." msgstr "" #: ../../:914 msgid "" "IBM Spectrum Virtualize Family driver `Bug #1892034 `_: Fixed issue in get_host_from_connector that " "volume name is not validated to get the host during terminate connection " "when the volume name is passed as input." msgstr "" #: ../../:302 wallaby-eom>:1043 msgid "" "IBM Spectrum Virtualize Family driver `Bug #1912564 `_: Fixed HyperSwap volume deletion issue." msgstr "" #: ../../:898 msgid "" "IBM Spectrum Virtualize Family driver `Bug #1913363 `_: Fixed issue in get_host_from_connector by " "caching the host information during attach or detach operations and using " "host details from cached information." msgstr "" #: ../../:906 msgid "" "IBM Spectrum Virtualize Family driver `Bug #1917605 `_: Fixed issue in StorwizeSVCCommonDriver to save " "site and peer pool information in stats during initialization." msgstr "" #: ../../:921 msgid "" "IBM Spectrum Virtualize Family driver `Bug #1920099 `_: Fix issue where _check_delete_vdisk_fc_mappings " "was deleting flashcopy mappings during extend operation of a clone volume " "where its source volume already contained a snapshot." msgstr "" #: ../../:937 msgid "" "IBM Spectrum Virtualize Family driver `Bug #1920870 `_: Fixed extend issues for volumes with replication " "enabled by avoiding volume remote-copy relationship deletion and creation." msgstr "" #: ../../:832 msgid "" "IBM Spectrum Virtualize Family driver `Bug #1920870 `_: Reduce multiple lsiogrp, lsvdisk calls in Retype " "operaton to optimize the code." msgstr "" #: ../../:944 msgid "" "IBM Spectrum Virtualize Family driver `Bug #1920890 `_: Fixed issue in retype_hyperswap_volume method to " "update site and iogrp information to the host during a retype from a non-" "HyperSwap volume to a HyperSwap volume." msgstr "" #: ../../:958 msgid "" "IBM Spectrum Virtualize Family driver `Bug #1922013 `_: Fixed issues in adding volumes to GMCV group." msgstr "" #: ../../:970 msgid "" "IBM Spectrum Virtualize Family driver `Bug #1924568 `_: Fixed issues that occurred while creating volume " "on data reduction pool." msgstr "" #: ../../:977 msgid "" "IBM Spectrum Virtualize Family driver `Bug #1924602 `_: Fixed issue to create snapshots, clones, group " "snapshots, and group clones for HyperSwap volumes." msgstr "" #: ../../:984 msgid "" "IBM Spectrum Virtualize Family driver `Bug #1926286 `_: Fixed an issue while fetching relationship " "details of a volume with replication enabled." msgstr "" #: ../../:991 msgid "" "IBM Spectrum Virtualize Family driver `Bug #1926491 `_: Updating volume metadata with rccg properties " "for the volumes with replication enabled and added to a group or removed " "from a group." msgstr "" #: ../../:998 msgid "" "IBM Spectrum Virtualize Family driver `Bug #1931968 `_: Fixed issue in updating the replication status " "of HyperSwap volume service based on status of nodes during initialization " "and periodic calls." msgstr "" #: ../../:780 msgid "" "IBM Spectrum Virtualize Family driver `Bug #1939145 `_: Updating create_relationship and create_rccg " "calls with the system_id in the place of system_name to fix the issues while " "creating a mirror volume or creating a consistency group." msgstr "" #: ../../:825 msgid "" "IBM Spectrum Virtualize Family driver `Bug #1949061 `_: Fixed retype issue of mirror-volume to mirror-" "volume-type with different mirror pool" msgstr "" #: ../../:297 msgid "" "IBM Spectrum Virtualize Family driver: Added `--delete-volumes` flag support " "for delete volumegroup operation. After adding support, the volumes can " "optionally be deleted when the volume group is deleted." msgstr "" #: ../../:303 msgid "" "IBM Spectrum Virtualize Family driver: Added `storwize_volume_group` " "parameter in the cinder configuration to support volume group feature." msgstr "" #: ../../:605 msgid "" "IBM Spectrum Virtualize Family driver: Added fucntionality that returns " "throttle rate of maximum IOPS and bandwidth of all VDisks of a specified " "storage pool." msgstr "" #: ../../:545 msgid "" "IBM Spectrum Virtualize Family driver: Added support for clean_rate " "parameter. Clean_rate parameter can now be passed as extra-spec in volume-" "type or fetched from cinder.conf." msgstr "" #: ../../:309 msgid "" "IBM Spectrum Virtualize Family driver: Added support for creation and " "deletion of volumegroup snapshots." msgstr "" #: ../../:314 msgid "" "IBM Spectrum Virtualize Family driver: Added support for volumegroup for SVC " "Code Level 8.5.1.0 and above. User can now create, modify and delete " "volumegroup using the exising cinder CLI for group operations." msgstr "" #: ../../:478 msgid "" "IBM Spectrum Virtualize Family driver: Added support to manage GMCV volumes " "on separate storage pools." msgstr "" #: ../../:551 msgid "" "IBM Spectrum Virtualize Family driver: Added support to manage host " "attachment using portsets for code level >= 8.4.2.0" msgstr "" #: ../../:483 msgid "" "IBM Spectrum Virtualize Family driver: Added volume-extend support for " "volumes created using a HyperSwap volume-type template." msgstr "" #: ../../:951 msgid "" "IBM Spectrum Virtualize Family driver: `Bug #1920912 `_: Fixed rccg create issue while adding volumes to " "a group where the group is cloned from group snapshot or other source group." msgstr "" #: ../../:1006 msgid "" "IBM Spectrum Virtualize Family driver: `Bug #1935670 `_: Fixed empty attribute values issue while " "updating volume metadata table for replicated volumes." msgstr "" #: ../../:1013 msgid "" "IBM Spectrum Virtualize Family driver: `Bug #1938212 `_: Added replication license support for " "FlashSystem V5000E storage system. Removed support for IBM Storwize V3700 as " "it reached End Of Service." msgstr "" #: ../../:788 msgid "" "IBM Spectrum Virtualize Family driver: `Bug #1941694 `_: Fixed detaching volume from second instance for " "multi-attach type volumes." msgstr "" #: ../../:611 msgid "" "IBM Spectrum Virtualize Family driver: `Bug #1961548 `_: Optimize lsvdisk and lssystem calls to reduce " "the computational time for creating GMCV volumes." msgstr "" #: ../../:632 yoga-eom>:433 msgid "" "IBM Spectrum Virtualize Family driver: `Bug #1968159 `_: Fix for retype failure for replicated volume-" "type. Controlling chfcmap call for rc_controlled fcmap for replication-type " "volumes during retype operation." msgstr "" #: ../../:199 msgid "" "IBM Spectrum Virtualize Family driver: `Bug #1976400 `_: Optimize svcinfo CLI calls to reduce the " "computational time for rc-relationship related operations." msgstr "" #: ../../:651 yoga-eom>:326 msgid "" "IBM Spectrum Virtualize Family driver: `Bug #1976499 `_: Setting correct SVC Code level for " "lsfcportsetmember call." msgstr "" #: ../../:682 msgid "" "IBM Spectrum Virtualize Family driver: `Bug #1982078 `_: Fixed the default portset value during driver " "initialization." msgstr "" #: ../../:549 msgid "" "IBM Spectrum Virtualize Family driver: `Bug #1985065 `_: Fixed to collect all the IP addresses for all " "the storage nodes given in lsip command response as volume of any iogrp " "should be available to the storage nodes in default scenario." msgstr "" #: ../../:654 msgid "" "IBM Spectrum Virtualize Family: Added support for revert to snapshot for " "global-mirror volume." msgstr "" #: ../../:147 stable/ussuri>:278 victoria-eom>:458 #: wallaby-eom>:892 msgid "" "IBM Spectrum Virtualize driver `Bug #1890254 `_: Fix check_vdisk_fc_mappings is not deleting all " "flashcopy mappings while deleting source volume, when multiple clones and " "snapshots are created using common source volume." msgstr "" #: ../../:801 msgid "" "IBM Spectrum Virtualize family driver `Bug #1943682 `_: Updating rccg_name property to volume metadata " "for the resultant volumes of a clone_group from a source_group or a " "group_snapshot." msgstr "" #: ../../:844 msgid "" "IBM Spectrum Virtualize family driver `Bug #1953185 `_: Fixed revert to snapshot issue for replicated " "volumes which are a part of group." msgstr "" #: ../../:597 msgid "" "IBM Spectrum Virtualize family driver `Bug #1960314 `_: Fixed resize issue for GMCV volumes which are a " "part of a consistency group(CG)." msgstr "" #: ../../:604 msgid "" "IBM Spectrum Virtualize family driver `Bug #1960315 `_: Fixed delete and resize volume issues in during " "reverse replication and added support to extend the volume for failover " "scenarios." msgstr "" #: ../../:625 msgid "" "IBM Spectrum Virtualize family driver `Bug #1966639 `_: Fixed resize issue in reverse replication for " "the volumes which are a part of a consistency group(CG)." msgstr "" #: ../../:512 msgid "" "IBM Spectrum Virtualize family driver `Bug #1978290 `_: Optimize lsmdiskgrp SSH calls in creation of " "replicated volumes to reduce the computational time." msgstr "" #: ../../:458 msgid "" "IBM Spectrum Virtualize: Added support to enable creating a group from " "source, when source is a replicated group or consistency group snapshot of a " "replicated group." msgstr "" #: ../../:649 msgid "" "IBM Spectrum Virtualize: Adds support for retype operation on global mirror " "volumes." msgstr "" #: ../../:849 msgid "" "IBM Storwize drivers had been previously marked unsupported. Testing " "requirements have been addressed and they are now fully supported again. IBM " "Storwize drivers allow cinder to manage volumes both in iSCSI and FC " "environment." msgstr "" #: ../../:375 msgid "" "IET iSCSI target removed. IET iSCSI target was deprecated in the V release." msgstr "" #: ../../:945 msgid "" "If ``image_service:store_id`` is not set in the extra-specs for a volume-" "type, then any volume of that type uploaded as an image will be uploaded to " "the default store in Glance." msgstr "" #: ../../:604 stable/ussuri>:642 #: victoria-eom>:1009 msgid "" "If a ``volume_type`` is not specified when a volume is created, Cinder tries " "to infer the volume type from other information in the volume-create request:" "" msgstr "" #: ../../:509 msgid "" "If all of the above apply to you, your upgrade path from Train to Ussuri is " "slightly more complicated than usual and may require some actions in your " "Train deployment *before* you upgrade. Please pick the least inconvenient " "of the following options:" msgstr "" #: ../../:484 msgid "" "If all the above three items apply to you, as part of your upgrade to cinder " "15.4.0 you should re-run the online database migrations contained in this " "release. This will prepare your cinder database for an eventual upgrade to " "the Ussuri release." msgstr "" #: ../../:499 stable/ussuri>:524 msgid "" "If necessary, you can create a new ``__DEFAULT__`` volume type as follows " "using the Block Storage API, or by using the python-cinderclient or python-" "openstackclient to do the equivalent:" msgstr "" #: ../../:699 stable/ussuri>:741 #: victoria-eom>:1277 msgid "" "If the ``default_volume_type`` is misconfigured (that is, if the value " "refers to a non-existent volume-type), requests that rely on the default " "volume-type (for example, a volume-create request that does not specify a " "volume-type) will result in a HTTP 500 response." msgstr "" #: ../../:254 msgid "" "If the length of the name after variable replacement exceeds the maximum " "length of host group (iSCSI target) names, the host name is truncated so " "that the length of the host groups or iSCSI targets do not exceed the " "maximum length." msgstr "" #: ../../:250 msgid "If the specified value includes ``{host}``, the following rules apply:" msgstr "" #: ../../:1308 msgid "" "If you *have not* modified ``periodic_interval``, you should see no " "differences from current behavior." msgstr "" #: ../../:1310 msgid "" "If you *have* modified ``periodic_interval``, please review the new options " "to determine which one(s) should be adjusted. Also, you should consider " "setting ``periodic_interval`` back to its default value of 60." msgstr "" #: ../../:481 msgid "" "If you are upgrading a Stein installation directly to this release (cinder " "15.4.0) or later, this notice does *not* apply to you." msgstr "" #: ../../:639 msgid "" "If you are upgrading to this release from an earlier release in the Train " "series (that is, you are upgrading from cinder>=15.0.0,<=15.3.0), under " "specific circumstances you should re-run the online database migrations so " "that your database will be in the correct state when you eventually upgrade " "to a Ussuri release. See the \"Upgrade Notes\" for more information." msgstr "" #: ../../:1167 msgid "" "If you have ``backup_driver_status_check_interval`` option in your cinder." "conf we recommend you to use ``backup_driver_stats_polling_interval`` to " "avoid deprecation warnings in logs." msgstr "" #: ../../:24 stable/train>:219 stable/ussuri>:246 #: victoria-eom>:426 wallaby-eom>:768 msgid "" "If you have a custom value for this policy in your cinder policy " "configuration file, this change to the default value will not affect you." msgstr "" #: ../../:27 stable/train>:222 stable/ussuri>:249 #: victoria-eom>:429 wallaby-eom>:771 msgid "" "If you have been aware of this regression and like the current (incorrect) " "behavior, you may add the following line to your cinder policy configuration " "file to restore that behavior::" msgstr "" #: ../../:552 msgid "" "If you have renamed (or renamed and deleted) the ``__DEFAULT__`` volume type " "in Train, you must re-create it **in your Train deployment** before " "upgrading to Ussuri. This will ensure that the ``__DEFAULT__`` volume type " "will be present in the database when you run the Ussuri online database " "migrations." msgstr "" #: ../../:259 msgid "" "If you specify this parameter, it is recommended that you specify ``True`` " "for the ``hitachi_group_create`` parameter to collect necessary information " "automatically." msgstr "" #: ../../:499 msgid "" "If your deployment uses ``storage_protocol`` to differentiate between " "backends that use the same protocol but report it using different variants, " "be aware that they will no longer be differentiated." msgstr "" #: ../../:71 current stable/2024.1>:225 msgid "Impacted operations:" msgstr "" #: ../../:170 xena-eom>:761 yoga-eom>:695 msgid "" "In light of the fix for RBD driver `bug #1941815 `_, we want to bring the following information to your " "attention." msgstr "" #: ../../:750 msgid "" "In order to provide operators with a choice of FCZM drivers, the Cinder " "community decided to continue supporting the Brocade FCZM driver on a best-" "effort basis. See the \"Bug Fixes\" section of these notes for changes made " "to allow the driver to run in a Python 3 environment." msgstr "" #: ../../:1284 msgid "" "In order to provide operators with a choice of Fibre Channel Zone Manager " "drivers, the Cinder community has decided to continue supporting the Brocade " "FCZM driver, which was marked 'unsupported' in the Ussuri release, on a best-" "effort basis." msgstr "" #: ../../:748 msgid "" "In order to simplify initial setup for new installations the default " "behaviour of the Quobyte driver for the options " "``nas_secure_file_operations`` and ``nas_secure_file_permissions`` has " "changed. The 'auto' values are no longer mapped to true but to false. " "Therefore the old default behaviour to run with secure settings is changed " "to run without secure settings as the new default behaviour. Installations " "using the default values for these options should ensure to explicitly set " "them to true with this new Cinder Quobyte driver version." msgstr "" #: ../../:1058 stable/ussuri>:1194 #: stable/ussuri>:1324 msgid "" "In order to use an unsupported driver, ``enable_unsupported_driver`` must be " "set to ``True`` in the driver's section in the cinder.conf file. If you are " "the consumer of such a driver, we encourage you to contact the vendor to " "make them aware of your concerns." msgstr "" #: ../../:643 msgid "" "In particular, we direct your attention to the default values for the " "policies associated with the Default Volume Types API (introduced with " "microversion 3.62 of the Block Storage API). These had experimentally " "recognized \"scope\", but for consistency with the other rules, their " "default values no longer recognize scope. (Scope will be introduced to all " "cinder policy defaults in the Yoga release.)" msgstr "" #: ../../:1113 msgid "" "In the Image service (Glance), the ``compressed`` container format " "identifier does not indicate a particular compression technology; it is up " "to the image consumer to determine what compression has been used, and there " "is no requirement that OpenStack services must support arbitrary compression " "technologies. For the upload and download of compressed images, Cinder " "supports *only* the gzip format." msgstr "" #: ../../:338 msgid "" "In the latter two cases, an end user can determine what happened by using " "the `Messages API `_, which can be accessed using the `cinderclient `_ or `openstackclient `_." msgstr "" #: ../../:243 msgid "" "In the length calculation, use the following values as the length of each " "variable:" msgstr "" #: ../../:1294 msgid "" "In this release, sending ``os-reset_status`` notifications to the following " "*nonstandard* publisher_ids is DEPRECATED:" msgstr "" #: ../../:566 msgid "" "Inclusion of a project_id in API URLs is now optional. The `Block Storage " "API V3 `_ reference " "guide continues to show URLs with a project_id because the legacy behavior " "continues to be supported." msgstr "" #: ../../:666 wallaby-eom>:71 xena-eom>:109 #: yoga-eom>:341 msgid "" "Infinidat Driver `bug #1981354 `_: Fixed Infinidat driver to return all configured and enabled " "iSCSI portals for a given network space." msgstr "" #: ../../:673 yoga-eom>:45 msgid "" "Infinidat Driver `bug #1981982 `_: Fixed Infinidat driver to use TLS/SSL communication between the " "Cinder volume service and the storage backend. Admin can set `True` or " "`False` for the `driver_use_ssl` and `suppress_requests_ssl_warnings` " "options in the driver section of cinder.conf to enable or disable these " "features." msgstr "" #: ../../:519 stable/zed>:19 msgid "" "Infinidat Driver `bug #1982350 `_: Fixed Infinidat driver multi-attach feature. Added a check if " "there are multiple attachments to the volume from the same connector and " "terminate connection only for the last attachment from the corresponding " "host." msgstr "" #: ../../:528 stable/zed>:28 msgid "" "Infinidat Driver `bug #1982405 `_: Fixed Infinidat driver to allow generic volume migration between " "two storage pools within the same cluster." msgstr "" #: ../../:535 msgid "" "Infinidat Driver `bug #1983287 `_: Fixed Infinidat driver to allow backup of an attached volume." msgstr "" #: ../../:541 msgid "" "Infinidat Driver `bug #1984000 `_: Fixed Infinidat driver to take into account the group identifier " "property when creating a new volume and add the volume to the consistency " "group." msgstr "" #: ../../:198 msgid "" "Infinidat driver `bug #2017815 `_: Fixed Infinidat driver to inherit compression setting by default " "for all newly created volumes. Admin can set ``True`` or ``False`` for the " "``infinidat_use_compression`` option in the driver section of ``cinder." "conf`` to explicitly enable or disable compression setting for all newly " "created volumes. Or leave this option unset (commented out) for all created " "volumes to inherit their compression setting from their parent pool at " "creation time. The default value is unset." msgstr "" #: ../../:348 msgid "Infinidat driver: Added support for revert to snapshot operation." msgstr "" #: ../../:408 msgid "" "Infinidat driver: Added support to manage and unmanage volumes and snapshots." " Also added the functionality to list the manageable volumes and snapshots." msgstr "" #: ../../:112 msgid "" "Infinidat driver: support has been removed for pre-v3.0 InfiniBox systems. " "These versions are end of life and have not been supported for a long time." msgstr "" #: ../../:320 msgid "" "Infinidat: Added support for storage assisted volume migration within a same " "InfiniBox host (iSCSI and FC)." msgstr "" #: ../../:617 msgid "" "Introduces microversion (MV) 3.63, which includes volume type ID in the " "volume details JSON response. This MV affects the volume detail list (``GET /" "v3/{project_id}/volumes/detail``), and volume-show (``GET /v3/{project_id}/" "volumes/{volume_id}``) calls." msgstr "" #: ../../:666 msgid "" "It is currently possible to manage a volume to an encrypted volume type, but " "that is not recommended because there is no way to supply an encryption key " "for the volume to cinder. Un-managing a volume of an encrypted volume type " "is already prevented, and it is expected that management to an encrypted " "type will similarly be blocked in a future release. This issue is being " "tracked as `Bug #1944577 `_." msgstr "" #: ../../:912 msgid "" "It is faster to create a new volume from a snapshot. You may wish to " "recommend this option to your users whose use cases do not strictly require " "revert-to-snapshot." msgstr "" #: ../../:823 msgid "" "It is no longer possible to specify an sqlalchemy-migrate-based version. " "When the ``cinder-manage db sync`` command is run, all remaining sqlalchemy-" "migrate-based migrations will be automatically applied. Attempting to " "specify an sqlalchemy-migrate-based version will result in an error." msgstr "" #: ../../:904 msgid "" "It was possible under certain circumstances for the host name of an instance " "to be leaked in the volume detail response. This has been fixed in the " "current release. The ``host_name`` field in any object in the " "``attachments`` array of the volume detail response is populated only when " "the call is made in an administrative context. Otherwise, its value is the " "JSON ``null`` value." msgstr "" #: ../../:1055 msgid "" "JovianDSS driver: `Bug #1941746 `_: Fixed Fix ensure_export function failure in case of partial " "target recovery." msgstr "" #: ../../:606 msgid "" "Just before release, `Bug #1965847 `_ was reported. When importing a backup record for a backup_id that " "currently exists, the import fails as expected. However, this operation has " "the unfortunate side effect that the existing backup record is deleted. " "Initial analysis of the bug indicates a small, isolated solution that should " "be backportable to stable branches." msgstr "" #: ../../:440 #: stable/train>:1708 msgid "" "Kaminario FC and iSCSI drivers: Fixed `bug 1829398 `_ where force detach would fail." msgstr "" #: ../../:803 msgid "" "Kaminario driver `bug #1951981 `_: Fixed create volume from volume or snapshot not using multipath " "configuration." msgstr "" #: ../../:87 stable/2023.2>:100 #: stable/train>:350 stable/train>:440 stable/train>:1109 stable/ussuri>:465 #: stable/ussuri>:1002 stable/zed>:50 victoria-eom>:742 wallaby-eom>:660 #: xena-eom>:10 xena-eom>:662 yoga-eom>:92 yoga-eom>:602 msgid "Known Issues" msgstr "" #: ../../:342 wallaby-eom>:1116 xena-eom>:1084 msgid "" "LVM driver `bug #1901783 `_: " "Fix unexpected delete volume failure due to unexpected exit code 139 on " "``lvs`` command call." msgstr "" #: ../../:556 msgid "" "LVM driver: Added support for the NVMe TCP transport protocol. Configuration " "option is ``target_protocol = nvmet_tcp`` when using ``nvmet`` as the " "``target_helper``." msgstr "" #: ../../:383 stable/train>:1719 msgid "" "LVM iSCSI driver fix for IPv6 addresses for the different targets, IET, LIO, " "TGT, CXT, and SCST." msgstr "" #: ../../:617 msgid "" "LVM nvmet target `bug #1964391 `_: Fixed temporary disconnection of all volumes from all hosts when " "creating and removing volume exports." msgstr "" #: ../../:624 msgid "" "LVM nvmet target `bug #1964394 `_: Fixed annoying kernel log message when exporting a volume." msgstr "" #: ../../:325 msgid "" "LVM nvmet target: Added support for new nvmeof connection properties format " "(version 2). Controlled with ``nvmeof_conn_info_version`` configuration " "option." msgstr "" #: ../../:390 msgid "" "Lenovo driver: Return additional configuration options from " "``get_driver_options`` call" msgstr "" #: ../../:523 msgid "" "Lightbits LightOS driver: new Cinder driver for Lightbits(TM) LightOS(R). " "Lightbits Labs (http://www.lightbitslabs.com) LightOS is software-defined, " "cloud native, high-performance, clustered scale-out and redundant NVMe/TCP " "storage that performs like local NVMe flash." msgstr "" #: ../../:26 victoria-eom>:100 wallaby-eom>:307 #: xena-eom>:536 msgid "" "Log a warning from the volume service when a volume driver's " "get_volume_stats() call takes a long time to return. This can help " "deployers troubleshoot a cinder-volume service misbehaving due to a driver/" "backend performance issue." msgstr "" #: ../../:604 xena-eom>:440 msgid "Many backend storage drivers have added features and fixed bugs." msgstr "" #: ../../:637 msgid "" "Many policies had their default values changed and their previous values " "deprecated. These are indicated in the sample policy configuration file, " "which you can view in the `policy.yaml `_ section of the " "`Cinder Service Configuration Guide`." msgstr "" #: ../../:586 msgid "" "Microversion 3.61 adds the ``cluster_name`` attribute to the volume detail " "response when called in an administrative context." msgstr "" #: ../../:589 msgid "" "Microversion 3.62 adds API calls to manage the default volume type for a " "specific project. See the `Default volume types (default-types) `_ section of the `Block Storage API v3 Reference `_ for more information." msgstr "" #: ../../:424 msgid "" "Microversion 3.65 includes the display of information in the volume or " "snapshot detail response to indicate whether that resource consumes quota, " "and adds the ability to filter a requested list of resources according to " "whether they consume quota or not." msgstr "" #: ../../:430 msgid "" "Microversion 3.66 removes the necessity to add a 'force' flag when " "requesting a snapshot of an in-use volume, given that this is not a problem " "for modern storage systems." msgstr "" #: ../../:474 msgid "" "Microversion 3.67 is introduced as a marker to indicate that any instance of " "the Block Storage API 3.67 or greater treats a project_id in the URL as " "optional. This change is backward compatible: the API can handle legacy " "URLs containing a project_id as well as URLs without a project_id. This is " "the case regardless of what microversion specified in a request. See the " "\"New Features\" section for details." msgstr "" #: ../../:482 msgid "" "Microversion 3.68 introduces a new volume action, ``os-reimage``, that " "allows a user to replace the current content of a specified volume with the " "data of a specified image supplied by the Image service (glance). See the " "\"New Features\" section for details." msgstr "" #: ../../:979 msgid "NEC Driver: Added multiattach support." msgstr "" #: ../../:1282 msgid "NEC Driver: Added support of more than 4 iSCSI portals for a node." msgstr "" #: ../../:975 msgid "NEC Driver: Added support to revert a volume to a snapshot." msgstr "" #: ../../:1582 msgid "" "NEC Driver: Deprecated ``nec_iscsi_portals_per_cont`` config option. The " "option was used to limit number of portals and is no longer needed." msgstr "" #: ../../:118 stable/ussuri>:172 victoria-eom>:355 #: wallaby-eom>:369 xena-eom>:1097 msgid "" "NFS driver `bug #1860913 `_: " "Fixed instance uses base image file when it is rebooted after online " "snapshot creation." msgstr "" #: ../../:714 wallaby-eom>:146 xena-eom>:236 #: yoga-eom>:365 msgid "" "NFS driver `bug #1946059 `_: " "Fixed revert to snapshot operation." msgstr "" #: ../../:441 msgid "" "NOTE: Enabling ONTAP REST client changes the behavior of QoS specs. Earlier, " "QoS values could be represented in BPS (bytes per second), but now REST " "client only supports integer values represented in MBPS (Megabytes per " "second). It means that though the user specifies the value in BPS, it will " "be converted to MBPS and rounded up." msgstr "" #: ../../:421 msgid "" "NetApp NFS driver: add an alternative approach to perform the efficient " "clone image when the Glance source store and Cinder destination pool are not " "in the same FlexVol, but they are in the same Cluster. Previously, the " "driver required the copy offload tool for doing it efficiently, which is no " "longer available. Now, the operators can maintain their efficient clone " "image by relying on the storage file copy operation." msgstr "" #: ../../:79 msgid "" "NetApp ONTAP NFS driver: Enabled support for Active/Active environments in " "the NetApp NFS driver (including replication)." msgstr "" #: ../../:111 stable/ussuri>:165 victoria-eom>:348 #: wallaby-eom>:362 xena-eom>:1090 msgid "" "NetApp ONTAP `bug #1906291 `_: Fix volume losing its QoS policy on the backend after moving it " "(migrate or retype with migrate) to a NetApp NFS backend." msgstr "" #: ../../:757 msgid "" "NetApp ONTAP `bug #1958245 `_: In an ONTAP flexgroup replication environment, snapmirror " "creation would succeed but a driver bug caused an error message to be logged " "for the cinder-volume service. The issue has been corrected in this release." msgstr "" #: ../../:278 msgid "" "NetApp ONTAP driver `Bug #1927784 `_: Fixed the replication setup with FlexVol pools." msgstr "" #: ../../:584 msgid "" "NetApp ONTAP driver `bug #1955057 `_: Fixed the function get_ontap_version on Cinder NetApp driver, " "now it returns a tuple of integers instead of a string." msgstr "" #: ../../:222 msgid "" "NetApp ONTAP driver `bug #2028857 `_: Fixed errors that were occuring in the replica failover " "operation when using ONTAP REST API." msgstr "" #: ../../:561 msgid "" "NetApp ONTAP driver: Added a new driver specific capability called " "`netapp_qos_min_support`. It is used to filter the pools that has support to " "the Qos minimum (floor) specs during the scheduler phase." msgstr "" #: ../../:541 msgid "" "NetApp ONTAP driver: Added support for Adaptive QoS specs. The driver now " "accepts ``expectedIOPSperGiB``, ``peakIOPSperGiB``, " "``expectedIOPSAllocation``, ``peakIOPSAllocation``, ``absoluteMinIOPS`` and " "``blockSize``. The field ``peakIOPSperGiB`` and the field " "``expectedIOPSperGiB`` are required together. The ``expectedIOPSperGiB`` and " "``absoluteMinIOPS`` specs are only guaranteed by ONTAP AFF systems. All " "specs can only be used with ONTAP version equal or greater than 9.4, " "excepting the ``expectedIOPSAllocation`` and ``blockSize`` specs which " "require at least 9.5." msgstr "" #: ../../:552 msgid "" "NetApp ONTAP driver: Added support for QoS Min (floor) throughput specs. The " "driver now accepts ``minIOPS`` and ``minIOPSperGiB`` specs, which can be set " "either individually or along with Max (ceiling) throughput specs. The " "feature requires storage ONTAP All Flash FAS (AFF) with version equal or " "greater than 9.3 for NFS and 9.2 for iSCSI and FCP. It also works with " "Select Premium with SSD and C190 storages with at least ONTAP 9.6." msgstr "" #: ../../:502 msgid "" "NetApp ONTAP driver: Added support to Revert to Snapshot for the iSCSI, FC " "and NFS drivers with FlexVol pool. This feature does not support FlexGroups " "and is limited to revert only to the most recent snapshot of a given Cinder " "volume." msgstr "" #: ../../:509 msgid "" "NetApp ONTAP driver: added option " "´netapp_driver_reports_provisioned_capacity´, which enables the driver to " "calculate and report provisioned capacity to Cinder Scheduler based on " "volumes sizes in the storage system." msgstr "" #: ../../:504 msgid "" "NetApp ONTAP driver: added support for FlexGroup pool using the NFS mode. " "There are several considerations for using the driver with it:" msgstr "" #: ../../:660 msgid "" "NetApp ONTAP: Added support for Adaptive QoS policies that have been pre-" "created on the storage system, with the NetApp driver and clustered ONTAP " "version 9.4 or higher. To use this feature, configure a Cinder volume type " "with the following extra-specs::" msgstr "" #: ../../:516 msgid "" "NetApp ONTAP: Added support for storage assisted migration within a same " "ONTAP cluster (iSCSI/FC/NFS)." msgstr "" #: ../../:766 wallaby-eom>:152 xena-eom>:298 #: yoga-eom>:452 msgid "" "NetApp ONTAP: Fix check QoS minimum support for SVM scoped account. See: " "`Bug #1924798 `_." msgstr "" #: ../../:668 stable/ussuri>:1448 msgid "" "NetApp ONTAP: Fixes `bug 1839384 `__ Detaching any instance from multiattached volume terminates " "connection. Now the connection is terminated only if there're no other " "instances using the same initiator." msgstr "" #: ../../:316 stable/ussuri>:330 victoria-eom>:508 #: wallaby-eom>:1233 msgid "" "NetApp SolidFire driver `Bug #1891914 `_: Fix an error that might occur on cluster workload " "rebalancing or system upgrade, when an operation is made to a volume at the " "same time its connection is being moved to a secondary node." msgstr "" #: ../../:302 stable/ussuri>:316 victoria-eom>:494 #: wallaby-eom>:1219 msgid "" "NetApp SolidFire driver `Bug #1896112 `_: Fixes an issue that may duplicate volumes during creation, " "in case the SolidFire backend successfully processes a request and creates " "the volume, but fails to deliver the result back to the driver (the response " "is lost). When this scenario occurs, the SolidFire driver will retry the " "operation, which previously resulted in the creation of a duplicate volume. " "This fix adds the ``sf_volume_create_timeout`` configuration option (default " "value: 60 seconds) which specifies an additional length of time that the " "driver will wait for the volume to become active on the backend before " "raising an exception." msgstr "" #: ../../:963 msgid "" "NetApp SolidFire driver `Bug #1932964 `_: Fixed a name exception that occurs on any volume migration." msgstr "" #: ../../:771 yoga-eom>:377 msgid "" "NetApp SolidFire driver `Bug #1934435 `_: Fixed errors that might occur when an operation is made to " "a volume at the same time as the Element OS upgrades." msgstr "" #: ../../:969 msgid "" "NetApp SolidFire driver `Bug #1942090 `_: Fixed a status exception that occurs on volume retype with " "migration." msgstr "" #: ../../:778 msgid "" "NetApp SolidFire driver `bug #1934459 `_: Fixed backend initialization failing with RecursionError " "error when OSProfiler is enabled." msgstr "" #: ../../:484 msgid "" "NetApp SolidFire driver now supports optimized revert to snapshot operations." "" msgstr "" #: ../../:712 msgid "" "NetApp SolidFire driver: Added inter-cluster volume migration (storage " "assisted) support. This allows users to efficiently migrate volumes between " "different SolidFire backends." msgstr "" #: ../../:928 msgid "" "NetApp SolidFire driver: Enabled support for Active/Active (including " "replication) to the SolidFire driver. This allows users to configure " "SolidFire backends in clustered environments." msgstr "" #: ../../:50 stable/train>:565 stable/ussuri>:1375 msgid "" "NetApp SolidFire driver: Fixed an issue that causes failback to fail after a " "volume service restart. This change fixes bug `1859653 `_." msgstr "" #: ../../:983 msgid "" "NetApp SolidFire now reports QoS and efficiency stats allowing operators to " "use those values in consideration for weighting and filtering of their " "backends." msgstr "" #: ../../:430 msgid "" "NetApp drivers: NFS, iSCSI and FCP drivers have now the option to request " "ONTAP operations through REST API. The new option `netapp_use_legacy_client` " "switches between the old ZAPI client approach and new REST client. It is " "default to `True`, meaning that the drivers will keep working as before " "using ZAPI operations. If desired, this option can be set to `False` " "interacting with the storage using the new REST client. However, this new " "client still relies on ZAPI calls for consistency group snapshot operation." msgstr "" #: ../../:446 stable/train>:1724 msgid "" "NetApp iSCSI drivers no longer use the discovery mechanism for multipathing " "and they always return all target/portals when attaching a volume. Thanks " "to this, volumes will be successfully attached even if the target/portal " "selected as primary is down, this will be the case for both, multipath and " "single path connections." msgstr "" #: ../../:79 msgid "" "NetApp iSCSI/FCP drivers: NetApp space allocation feature allows ONTAP and " "host to see the actual space correctly when host deletes data. It also " "notifies the host when the LUN cannot accept write data due to lack of space " "on the volume, and makes the LUN read-only (rather than going offline). This " "feature can be enabled or disabled on cinder volumes by using volume type " "extra specs with the ``netapp:space_allocation`` property." msgstr "" #: ../../:656 msgid "New Cinder Hitachi driver based on REST API for Hitachi VSP storages." msgstr "" #: ../../:1063 msgid "New Cinder driver for Seagate FC and iSCSI storage arrays." msgstr "" #: ../../:508 msgid "New Cinder volume driver for Inspur AS13000 series." msgstr "" #: ../../:499 msgid "" "New Cinder volume driver for KIOXIA Kumoscale storage systems. The driver " "storage system supports NVMeOF." msgstr "" #: ../../:489 msgid "New Cinder volume driver for LINBIT LINSTOR resources." msgstr "" #: ../../:575 msgid "" "New Cinder volume driver for TOYOU ACS5000. The new driver supports iSCSI." msgstr "" #: ../../:596 msgid "New FC cinder volume driver for TOYOU NetStor Storage." msgstr "" #: ../../:10 current #: stable/2023.1>:189 stable/2023.2>:38 stable/2024.1>:30 stable/stein>:80 #: stable/stein>:345 stable/stein>:461 stable/train>:10 stable/train>:331 #: stable/train>:832 stable/train>:910 stable/ussuri>:10 stable/ussuri>:446 #: stable/ussuri>:840 stable/zed>:131 stable/zed>:304 victoria-eom>:10 #: victoria-eom>:96 victoria-eom>:137 victoria-eom>:226 victoria-eom>:610 #: wallaby-eom>:10 wallaby-eom>:303 wallaby-eom>:450 xena-eom>:261 #: xena-eom>:446 yoga-eom>:174 yoga-eom>:494 msgid "New Features" msgstr "" #: ../../:94 msgid "New ISCSI cinder volume driver for TOYOU NetStor TYDS Storage." msgstr "" #: ../../:1420 msgid "" "New config option spdk_max_queue_depth is added for SPDK NVMe-oF target. It " "allows users to specify max queu depth." msgstr "" #: ../../:805 msgid "" "New configuration options have been added to enable mTLS between cinder and " "glance: use ``glance_certfile`` and ``glance_keyfile`` in the ``[DEFAULT]`` " "section of the cinder configuration file." msgstr "" #: ../../:998 msgid "NexentaStor5 iSCSI and NFS drivers multiattach capability enabled." msgstr "" #: ../../:848 msgid "" "Nimble driver `bug #1918099 `_: Fix revert to snapshot not working as expected." msgstr "" #: ../../:913 msgid "" "Nimble driver `bug #1918229 `_: Corrected an issue where the Nimble storage driver was " "inaccurately determining that there was no free space left in the storage " "array. The driver now relies on the storage array to report the amount of " "free space." msgstr "" #: ../../:614 msgid "Nimble driver now supports discard." msgstr "" #: ../../:334 stable/2024.1>:380 msgid "" "Nimble driver: Enable thin provisioning as default method while creating " "volumes." msgstr "" #: ../../:770 msgid "" "Nimble specific extra-spec ``nimble:multi-initiator`` is removed. Common " "extra-spec multiattach is added." msgstr "" #: ../../:1243 msgid "" "Nimble: Documented that existing driver supports the new Alletra 6k backend. " "Alletra 6k is newer version of existing Nimble backend." msgstr "" #: ../../:720 msgid "" "Not to put too fine a point on it, silent truncation is worse than failure, " "and the Cinder team will be addressing these issues in the next release. " "Additionally (as if that isn't bad enough!), we suspect that the above " "anomalies will also occur when using volume encryption with NFS-based " "storage backends, though this has not yet been reported or confirmed." msgstr "" #: ../../:669 msgid "" "Note that a cluster scoped account must be used in the driver configuration " "in order to use QoS in clustered ONTAP." msgstr "" #: ../../:506 msgid "" "Note that this is a destructive action, that is, all data currently " "contained in a volume is destroyed when the volume is re-imaged." msgstr "" #: ../../:56 msgid "" "Note that when the firmware version of the ETERNUS AF/DX is earlier than " "V11L30, upper limits for the volume QoS settings of the ETERNUS AF/DX are " "set using predefined options. This means that you should set the upper " "limit *of the ETERNUS AF/DX side* to a maximum value that does not exceed " "the specified ``maxBWS``." msgstr "" #: ../../:106 stable/2023.2>:119 stable/zed>:68 #: xena-eom>:29 yoga-eom>:111 msgid "" "Nova must be `configured to send service tokens `_ **and** " "cinder must be configured to recognize at least one of the roles that the " "nova service user has been assigned in keystone. By default, cinder will " "recognize the ``service`` role, so if the nova service user is assigned a " "differently named role in your cloud, you must adjust your cinder " "configuration file (``service_token_roles`` configuration option in the " "``keystone_authtoken`` section). If nova and cinder are not configured " "correctly in this regard, detaching volumes will no longer work (`Bug " "#2004555 `_)." msgstr "" #: ../../:151 stable/train>:1650 msgid "" "Now cinder will be rollback the ``quota_usages`` table when failed to create " "an incremental backup if there doesn't exist a parent backup or the backup " "is not in available state." msgstr "" #: ../../:919 msgid "" "Now cinder will keep track of 'multiattach' attribute when managing backend " "volumes." msgstr "" #: ../../:505 msgid "" "On HCI deployments and when running Cinder and Glance with Cinder backend on " "the same host an os-brick shared location can be configured using the " "``lock_path`` in the ``[os_brick]`` configuration section." msgstr "" #: ../../:561 msgid "" "Once your Ussuri upgrade is completed, the ``__DEFAULT__`` volume type may " "safely be renamed (or renamed and deleted) as long as the " "``default_volume_type`` configuration option is set to a valid existing " "volume type." msgstr "" #: ../../:497 msgid "" "Only temporary resources created internally by cinder will have the value " "set to ``false``." msgstr "" #: ../../:525 msgid "Open-E JovianDSS driver: Added 16K block size support." msgstr "" #: ../../:521 msgid "Open-E JovianDSS driver: Added multiattach support." msgstr "" #: ../../:385 msgid "" "Open-E JovianDSS driver: general rework of volume and snapshot creation and " "deletion." msgstr "" #: ../../:389 msgid "" "Open-E JovianDSS driver: network interfaces selection on JovianDSS storage " "has been reworked." msgstr "" #: ../../:89 msgid "Open-E JovianDSS driver: revert-to-snapshot has been removed." msgstr "" #: ../../:429 msgid "" "Operators affected by `OSSN-0086 `_ should note that this release updates the os-brick library used by " "cinder to version 2.10.5 in order to address an issue associated with the " "previous fixes for `Bug #1823200 `_." msgstr "" #: ../../:435 msgid "" "Operators affected by `OSSN-0086 `_ should note that this release updates the os-brick library used by " "cinder to version 3.0.3 in order to address an issue associated with the " "previous fixes for `Bug #1823200 `_." msgstr "" #: ../../:606 msgid "" "Oracle ZFSSA iSCSI volume driver implements ``get_manageable_volumes()``" msgstr "" #: ../../:662 #: stable/2023.2>:330 stable/2024.1>:376 stable/stein>:983 stable/train>:682 #: stable/train>:1766 stable/ussuri>:724 stable/ussuri>:1483 stable/zed>:221 #: stable/zed>:811 victoria-eom>:1260 wallaby-eom>:102 wallaby-eom>:1243 #: xena-eom>:139 xena-eom>:1226 yoga-eom>:254 yoga-eom>:398 yoga-eom>:977 msgid "Other Notes" msgstr "" #: ../../:616 stable/ussuri>:654 #: victoria-eom>:1021 msgid "" "Otherwise, the volume type is the default volume type configured by the " "operator, and if no volume type is so configured, the volume type is the " "system default volume type, namely, ``__DEFAULT__``." msgstr "" #: ../../:562 msgid "" "Over the Xena and Yoga development cycles, cinder's default policy " "configuration is being modified to take advantage of the default " "authentication and authorization apparatus supplied by the Keystone project. " " This will give operators a rich set of default policies to control how " "users interact with the Block Storage service API." msgstr "" #: ../../:905 msgid "" "Please be aware of the following known issues with this operation and the " "Ceph storage backend:" msgstr "" #: ../../:920 stable/ussuri>:1029 msgid "Please consult the Ceph documentation for details." msgstr "" #: ../../:248 msgid "" "PowerFlex Driver `bug #2052995 `_: REST API calls to the PowerFlex backend did not have a timeout " "set, which could result in cinder waiting forever. This fix introduces two " "configuration options, ``rest_api_connect_timeout`` and " "``rest_api_read_timeout``, to control timeouts when connecting to the " "backend. The default value of each is 30 seconds." msgstr "" #: ../../:264 wallaby-eom>:331 xena-eom>:890 msgid "" "PowerFlex driver `bug #1897598 `_: Fixed bug with PowerFlex storage-assisted volume migration when " "volume migration was performed without conversion of volume type in cases " "where it should have been converted to/from thin/thick provisioned." msgstr "" #: ../../:720 yoga-eom>:68 msgid "" "PowerFlex driver `bug #1942095 `_: Fixed Cinder volume caching mechanism for the driver. Now the " "driver correctly raises ``exception.SnapshotLimitReached`` when maximum " "snapshots are created for a given volume and a volume cache is invalidated " "to allow a new row of fast volume clones." msgstr "" #: ../../:799 stable/ussuri>:1392 msgid "" "PowerMax Driver - Allowing for default volume type in group operations where " "the array serial number is retrieved from the cinder.conf instead of the " "pool_name on the extra specs." msgstr "" #: ../../:712 msgid "" "PowerMax Driver - Concurrent live migrations can sometimes fail when one " "thread deletes a storage group that another thread may need." msgstr "" #: ../../:292 stable/train>:805 stable/ussuri>:1398 msgid "" "PowerMax Driver - Issue with upgrades from pre Pike to Pike and later. The " "device is not found when trying to snapshot a legacy volume." msgstr "" #: ../../:369 wallaby-eom>:1163 msgid "" "PowerMax Driver - Promotion RDF Group number fix uses remote array SID when " "finding rdf group number when performing retype during failover." msgstr "" #: ../../:882 msgid "" "PowerMax Driver - Support to allow the use of multiple replication modes on " "one backend array." msgstr "" #: ../../:1498 msgid "" "PowerMax Driver - Two new replication specific configuration options " "sync_interval and sync_retries have been added to PowerMax cinder " "configuration. These configuration options determine how many times to " "retry checks to see if a SnapVX copy mode has completed with a replication " "enabled volume, and how long to wait between retries." msgstr "" #: ../../:361 wallaby-eom>:1155 msgid "" "PowerMax Driver - `bug #1908920 `_: This offline r1 promotion fix resets replication enabled and " "configuration metadata during promotion retype with offline r1 array. It " "also gets management storage group name from source extra_specs during " "promotion." msgstr "" #: ../../:1178 msgid "" "PowerMax Driver - corrected handling of exceptions occurring during cleanup " "in the context of volume migration (Change-Id " "`I0c0a96e21209c5abe359c6985fae7cee598c21ab `_)" msgstr "" #: ../../:733 msgid "" "PowerMax Driver - support for using snap_ids instead of generations for " "better handling of volume snapshots (Change-Id " "`I0edf2ac777bef888e760f711a94e3fe4f94262ae `_)" msgstr "" #: ../../:284 wallaby-eom>:995 msgid "" "PowerMax Driver `bug #1905564 `_: Fix Fix remote SRP not being assigned to volume's Host when " "performing retype during failover-promotion." msgstr "" #: ../../:237 msgid "" "PowerMax Driver `bug #2051830 `_: REST API calls to the PowerMax backend did not have a timeout " "set, which could result in cinder waiting forever. This fix introduces two " "configuration options, ``rest_api_connect_timeout`` and " "``rest_api_read_timeout``, to control timeouts when connecting to the " "backend. The default value of each is 30 seconds." msgstr "" #: ../../:987 msgid "" "PowerMax driver - Changing 8.4 to 9.0 Unisphere for PowerMax REST endpoints." msgstr "" #: ../../:354 stable/ussuri>:1012 msgid "" "PowerMax driver - Disabling inuse storage assisted migration to a metro or " "asynchronous replicated volume type as this operation will not facilitate FC " "scanning or iSCSI login of the target array." msgstr "" #: ../../:1031 msgid "" "PowerMax driver - Volume deallocate and volume delete functionality have " "been combined into a single workflow." msgstr "" #: ../../:923 msgid "" "PowerMax driver - Workload support was dropped in ucode 5978. If a VMAX All " "Flash array is upgraded to 5978 or greater and existing volume types " "leveraged workload e.g. DSS, DSS_REP, OLTP and OLTP_REP, certain operations " "will no longer work and the volume type will be unusable. This fix addresses " "these issues and fixes problems with using old volume types with workloads " "included in the volume type pool_name." msgstr "" #: ../../:308 stable/train>:868 #: stable/ussuri>:1455 msgid "" "PowerMax driver - fix to eliminate 'cannot use the device for the function " "because it is in a Copy Session' when attempting to delete a volume group " "that previously had a group snapshot created on and deleted from it." msgstr "" #: ../../:1492 msgid "" "PowerMax driver - the minimum version of Unisphere for PowerMax for the " "current release is 9.1.0.5. It is however recommended to install the " "Security Releases(SR) of Unisphere for PowerMax if they become available." msgstr "" #: ../../:1776 msgid "" "PowerMax driver - the minimum version of Unisphere for PowerMax required for " "Train is 9.1, so all the latest 91 REST endpoints will be used." msgstr "" #: ../../:1296 msgid "" "PowerMax driver - the minimum version of Unisphere for PowerMax required for " "Victoria is 9.2, so all the latest 92 REST endpoints will be used." msgstr "" #: ../../:932 msgid "" "PowerMax driver : Enhancement to use an existing initiator group even if " "there is no entry for the contained initiator(s) in the login table. This is " "permissable so long as the initiator(s) in the connector object match." msgstr "" #: ../../:107 victoria-eom>:173 wallaby-eom>:231 #: xena-eom>:1034 msgid "" "PowerMax driver `bug #1929429 `_: Fixes child/parent storage group check so that a pattern match " "is not case sensitive. For example, myStorageGroup should equal " "MYSTORAGEGROUP and mystoragegroup." msgstr "" #: ../../:247 yoga-eom>:925 msgid "" "PowerMax driver `bug #1930290 `_: This fixes the QoS conflict issue on a child storage group by " "not setting QoS on a parent storage group." msgstr "" #: ../../:550 msgid "" "PowerMax driver `bug #1936848 `_: Fixed Generic Volume Group error where the name has been changed " "in OpenStack and is not reflected on the corresponding storage group on the " "PowerMax." msgstr "" #: ../../:383 yoga-eom>:938 msgid "" "PowerMax driver `bug #1938572 `_ : Legacy PowerMax OS fix to convert an int to a string if the " "generation of snapVX is returned as an int from REST so that a 0 does not " "equate to False in python." msgstr "" #: ../../:78 stable/ussuri>:158 victoria-eom>:324 #: wallaby-eom>:345 xena-eom>:1021 msgid "" "PowerMax driver `bug #1939139 `_: Fix on create snapshot operation that exists when using PowerMax " "OS 5978.711 and later." msgstr "" #: ../../:116 yoga-eom>:384 msgid "" "PowerMax driver `bug #1979668 `_: Fixed visibility of manageable volumes in multiple storage " "groups." msgstr "" #: ../../:1142 msgid "" "PowerMax driver: Checking that the contents of the initiator group match the " "contents of the connector regardless of the initiator_check option being " "enabled. This will ensure an exception is raised if there is a mismatch, in " "all scenarios." msgstr "" #: ../../:1149 msgid "" "PowerMax driver: Enhancement to check the status of the ports in the port " "group so that any potential issue, like the ports being down, is highlighted " "early and clearly." msgstr "" #: ../../:1136 msgid "" "PowerMax driver: Fix to prevent an R2 volume being larger than the R1 so " "that an extend operation will not fail if the R2 happens to be larger than " "the requested extend size." msgstr "" #: ../../:382 xena-eom>:1110 msgid "" "PowerMax driver: Fix to suspend the storage group you are about to delete " "and then add a force flag to delete the volume pairs within the storage " "group." msgstr "" #: ../../:375 xena-eom>:1103 msgid "" "PowerMax driver: Previously, the target storage group created from a " "replicated storage group was also replicated, which could cause failures. " "This fix creates a non-replicated target initially, and lets the replicate " "group API take care of replicating it." msgstr "" #: ../../:693 msgid "" "PowerMax for Cinder driver now supports Port Group and Port load balancing " "when attaching Nova Compute instances to volumes on the backend PowerMax." msgstr "" #: ../../:1026 msgid "" "PowerMax for Cinder driver now supports extending in-use Metro RDF enabled " "volumes." msgstr "" #: ../../:516 msgid "" "PowerMax for Cinder driver now supports storage-assisted in-use retype for " "volumes including those in replication sessions." msgstr "" #: ../../:687 msgid "" "PowerMax for Cinder driver now supports the ability to transition to a new " "primary array as part of the failover process if the existing primary array " "is deemed unrecoverable." msgstr "" #: ../../:316 wallaby-eom>:1064 xena-eom>:929 msgid "" "PowerStore driver `Bug #1920729 `_: Fix iSCSI targets not being returned from the REST API call if " "targets are used for multiple purposes (iSCSI target, Replication target, " "etc.)." msgstr "" #: ../../:492 stable/zed>:163 msgid "" "PowerStore driver `bug #1962824 `_: Fixed Cinder volume caching mechanism for the driver. Now the " "driver correctly raises ``exception.SnapshotLimitReached`` when maximum " "snapshots are created for a given volume and the volume cache is invalidated " "to allow a new row of fast volume clones." msgstr "" #: ../../:785 wallaby-eom>:88 xena-eom>:122 #: yoga-eom>:390 msgid "" "PowerStore driver `bug #1981068 `_: Fixed request data validation for the REST client." msgstr "" #: ../../:567 msgid "PowerStore driver: Add Consistency Groups support." msgstr "" #: ../../:571 msgid "PowerStore driver: Add OpenStack replication v2.1 support." msgstr "" #: ../../:823 msgid "" "PowerStore driver: ``powerstore_appliances`` option is deprecated and will " "be removed in a future release. Driver does not use this option to determine " "which appliances to use. PowerStore uses its own load balancer instead." msgstr "" #: ../../:169 stable/train>:408 stable/ussuri>:417 stable/ussuri>:819 #: victoria-eom>:577 wallaby-eom>:441 xena-eom>:409 yoga-eom>:464 msgid "Prelude" msgstr "" #: ../../:61 current stable/2024.1>:215 msgid "" "Previously, the below operations could fail if the linked device was not yet " "fully defined at the time of the call. Now, when ``snapvx_unlink_symforce`` " "is enabled, those operations are not interrupted by not fully defined " "devices." msgstr "" #: ../../:838 msgid "" "Prior to the Ussuri release, ``os-reset_status`` notifications for volumes, " "snapshots, and backups were sent to *nonstandard* publisher_ids. This " "behavior was deprecated in Ussuri, and notifications were sent to both the " "standard and nonstandard publisher_ids. In this release, ``os-" "reset_status`` notifications, like all other notifications for volume, " "snapshot and backup, are sent *only* to the following *standard* " "publisher_ids:" msgstr "" #: ../../:1047 stable/ussuri>:1190 #: stable/ussuri>:1320 msgid "ProphetStor drivers: FC and iSCSI" msgstr "" #: ../../:298 stable/2024.1>:354 msgid "" "Pure Storage Cinder Driver: Fixed `bug 2029005 `__ to correctly disconnect a sync replicated volume " "from host on the secondary array when uniform option is set to True." msgstr "" #: ../../:391 yoga-eom>:946 msgid "" "Pure Storage Driver: Add internal check to allow for FlashArray with joint " "FC and NVMe-FC support" msgstr "" #: ../../:396 xena-eom>:1130 msgid "" "Pure Storage FlashArray driver `bug #1929219 `_: Fixes issue with incorrect internal mechanism for " "checking REST API of backend array. This has no external effect for users." msgstr "" #: ../../:389 xena-eom>:1123 msgid "" "Pure Storage FlashArray driver `bug #1936663 `_: Fixes issue where cloning a consistency group " "containing volumes with very long names causes a crash - Required for " "PowerVC support" msgstr "" #: ../../:403 xena-eom>:1137 msgid "" "Pure Storage FlashArray driver `bug #1938579 `_: Fixes issue when cloning multiple volumes in PowerVC " "deployments." msgstr "" #: ../../:637 stable/zed>:196 msgid "" "Pure Storage FlashArray driver `bug #1969784 `_: Fixed array failover incorrectly handles loss of an " "array due to network issue" msgstr "" #: ../../:124 stable/ussuri>:115 victoria-eom>:83 #: wallaby-eom>:94 xena-eom>:1117 msgid "" "Pure Storage FlashArray driver `bug 1910143 `_: Parameter ``pure_iscsi_cidr`` is now IPv4/v6 " "agnostic." msgstr "" #: ../../:193 stable/ussuri>:220 victoria-eom>:382 #: wallaby-eom>:1174 msgid "" "Pure Storage FlashArray driver fix to ensure cinder_tempest_plugin " "consistency group tests pass." msgstr "" #: ../../:1042 msgid "" "Pure Storage FlashArray driver has added configuration option " "``pure_host_personality`` for setting the host personality upon host " "creation (existing hosts are not affected)." msgstr "" #: ../../:1048 msgid "" "Pure Storage FlashArray driver has added configuration option " "``pure_iscsi_cidr`` for setting a network CIDR for iSCSI target connection. " "The default value will allow connections to all iSCSI targets." msgstr "" #: ../../:521 msgid "" "Pure Storage FlashArray driver has added configuration options " "``pure_replication_pg_name`` and ``pure_replication_pod_name`` for setting " "the names for replication PGs and Pods." msgstr "" #: ../../:90 msgid "" "Pure Storage FlashArray driver: Added support NVMe-TCP transport layer." msgstr "" #: ../../:265 yoga-eom>:582 msgid "" "Pure Storage FlashArray driver: Enabled support for Active/Active " "replication for the FlashArray driver. This allows users to configure " "FlashArray backends in clustered environments." msgstr "" #: ../../:230 wallaby-eom>:628 msgid "" "Pure Storage FlashArray driver: Enabled support for Active/Active to both " "the iSCSI and FC driver. This allows users to configure Pure Storage " "backends in clustered environments." msgstr "" #: ../../:14 stable/ussuri>:19 victoria-eom>:14 #: wallaby-eom>:14 xena-eom>:529 msgid "" "Pure Storage FlashArray driver: added configuration option " "``pure_iscsi_cidr_list`` for setting several network CIDRs for iSCSI target " "connection. Both IPv4 and IPv6 is supported. The default still allows all " "IPv4 targets." msgstr "" #: ../../:320 xena-eom>:784 msgid "" "Pure Storage FlashArray minimum ``purestorage`` SDK version increased to 1." "17.0" msgstr "" #: ../../:375 wallaby-eom>:409 xena-eom>:1143 msgid "" "Pure Storage `bug #1930748 `_: Fixed issues with multiattched volumes being diconnected from a " "backend when still listed as an attachment to an instance." msgstr "" #: ../../:453 msgid "" "Pure Storage adds a new driver to support NVMe-RoCE for the FlashArray. All " "features of the iSCSI and FC drivers are fully supported by this new driver." msgstr "" #: ../../:239 xena-eom>:347 yoga-eom>:863 msgid "" "Pure Storage driver `Bug #1945824 `_: Fixed missing DB values when creating new consistency group from " "CG snapshot." msgstr "" #: ../../:257 wallaby-eom>:860 msgid "" "Pure Storage driver `bug 1870103 `_: Ensure that unmanaged volumes do not exceed maximum character " "length on FlashArray." msgstr "" #: ../../:588 msgid "" "Pure Storage driver adds volume metadata describing the backend array name " "(``array_name``) and volume name (``array_volume_name``). This allows easier " "identification and location of a cinder volume when multiple clusters are " "using the same backend arrays, or when the cinder scheduler has multiplae " "backends to choose from." msgstr "" #: ../../:1169 msgid "" "Pure Storage driver: Add missing support for ``host_personality`` setting " "for FC-based hosts" msgstr "" #: ../../:348 msgid "" "Pure Storage driver: Added replication capability to backend pool " "information. Response will be ```async```, ```sync``` or```trisync```. " "```sync``` implies support for ```async``` and ```trisync``` implies support " "for ```sync``` and ```async```." msgstr "" #: ../../:354 msgid "" "Pure Storage driver: Added support for 3-site replication, aka trisync. " "Requires two replication devices to be created, one async and one sync, plus " "the addition of new parameters ``pure_trisync_enabled`` and " "``pure_trisync_pg_name``." msgstr "" #: ../../:99 msgid "" "Pure Storage driver: Allow synchronously replicated volumes to be created " "during a replication failover event. These will remain viable volumes when " "the replication is failed back to its original state." msgstr "" #: ../../:990 msgid "" "Pure Storage: FlashArray minimum Purity//FA version is increased to 5.3.0. " "All FlashArray backends must be at at least this minimum version or the " "driver will not initialize." msgstr "" #: ../../:739 msgid "" "Pure Storage: Minimum supported FlashArray Purity//FA is changed to 5.3.0. " "All FlashArray backends must be at at least this minimum version or the " "driver will not initialize." msgstr "" #: ../../:951 msgid "" "Pure Storage: Remove all API version checks in driver as the new minimum " "FlashArray Purity//FA version supports all previously version-gated features " "and functionality support." msgstr "" #: ../../:284 stable/2024.1>:342 msgid "" "Pure iSCSI & FC driver `bug #2006960 `_: Fixed attaching LUNs greater than 255. Driver leverages new os-" "brick functionality to specify LUN addressing mode." msgstr "" #: ../../:830 msgid "" "Python 2 is no longer supported. The minimum version of Python that may be " "used with this release is **Python 3.6**." msgstr "" #: ../../:1097 msgid "" "Python 2.7 support has been dropped. The last release of Cinder to support " "py2.7 is OpenStack Train. The minimum version of Python now supported by " "Cinder is Python 3.6." msgstr "" #: ../../:486 msgid "" "Python 3.6 & 3.7 support has been dropped. The minimum version of Python now " "supported is Python 3.8." msgstr "" #: ../../:539 msgid "QNAP Cinder driver supports QES FW on TDS series NAS." msgstr "" #: ../../:486 stable/zed>:591 xena-eom>:213 #: yoga-eom>:320 msgid "" "RBD Driver `bug #1957073 `_: " "Fixed snapshot deletion failure when its volume doesn't exist." msgstr "" #: ../../:381 stable/ussuri>:382 victoria-eom>:540 #: wallaby-eom>:949 msgid "" "RBD driver `Bug #1898918 `_: " "Fix thread block caused by the flatten operation during cloning a volume. " "Now the flatten operation is executed in a different thread." msgstr "" #: ../../:339 xena-eom>:964 msgid "" "RBD driver `Bug #1922408 `_: " "Fixed create encrypted volume from encrypted snapshot." msgstr "" #: ../../:56 stable/train>:260 stable/ussuri>:389 #: victoria-eom>:547 wallaby-eom>:966 msgid "" "RBD driver `bug #1901241 `_: " "Fixed an issue where decreasing the ``rbd_max_clone_depth`` configuration " "option would prevent volumes that had already exceeded that depth from being " "cloned." msgstr "" #: ../../:174 stable/ussuri>:201 victoria-eom>:291 #: wallaby-eom>:1016 msgid "" "RBD driver `bug #1907964 `_: " "Add support for fast-diff on backup images stored in Ceph. Provided fast-" "diff is supported by the backend it will automatically be enabled and used. " "With fast-diff enabled, the generation of diffs between images and snapshots " "as well as determining the actual data usage of a snapshot is speed up " "significantly." msgstr "" #: ../../:689 xena-eom>:229 yoga-eom>:358 msgid "" "RBD driver `bug #1916843 `_: " "Fixed rpc timeout when backing up RBD snapshot. We no longer flatten " "temporary volumes and snapshots." msgstr "" #: ../../:204 xena-eom>:1028 yoga-eom>:795 msgid "" "RBD driver `bug #1941815 `_: " "Fixed deleting volumes with snapshots/volumes in the ceph trash space." msgstr "" #: ../../:558 msgid "" "RBD driver `bug #1942210 `_: " "When creating a volume from a snapshot, the operation could fail due to an " "uncaught exception being raised during a check to see if the backend Ceph " "installation supported the clone v2 API. The driver now handles this " "situation gracefully." msgstr "" #: ../../:85 stable/ussuri>:132 victoria-eom>:164 #: wallaby-eom>:210 xena-eom>:326 yoga-eom>:816 msgid "" "RBD driver `bug #1947518 `_: " "Corrected a regression caused by the fix for `Bug #1931004 `_ that was attempting to access the " "glance images RBD pool with write privileges when creating a volume from an " "image." msgstr "" #: ../../:643 stable/zed>:202 xena-eom>:77 #: yoga-eom>:77 msgid "" "RBD driver `bug #1960206 `_: " "Fixed ``total_capacity`` reported by the driver to the scheduler on Ceph " "clusters that have renamed the ``bytes_used`` field to ``stored``. (e.g., " "`Nautilus `_)." msgstr "" #: ../../:543 msgid "" "RBD driver has added multiattach support. It should be noted that " "replication and multiattach are mutually exclusive, so a single RBD volume " "can only be configured to support one of these features at a time. " "Additionally, RBD image features are not preserved which prevents a volume " "being retyped from multiattach to another type. This limitation is temporary " "and will be addressed soon." msgstr "" #: ../../:460 msgid "RBD driver: Added QoS support." msgstr "" #: ../../:742 msgid "" "RBD driver: Prior to this release, the Cinder project did not have a " "statement concerning what versions of Ceph are supported by Cinder. We " "hereby announce that:" msgstr "" #: ../../:360 stable/zed>:135 msgid "" "RBD driver: Sets the Ceph cluster FSID as the default value for the " "``rbd_secret_uuid`` configuration option." msgstr "" #: ../../:1018 msgid "" "RBD driver: There are some known issues concerning the revert-to-snapshot " "support added in this release." msgstr "" #: ../../:902 msgid "" "RBD driver: support added for reverting a volume to the most recent snapshot " "taken." msgstr "" #: ../../:829 msgid "" "RBD driver: the ``rbd_keyring_conf`` configuration option, which was " "deprecated in the Ussuri release, has been removed. If it is present in a " "configuration file, its value will silently be ignored. For more " "information, see `OSSN-0085 `_: Cinder configuration option can leak secret key from Ceph backend." msgstr "" #: ../../:1185 msgid "" "REST API - fixed issue where the Get Current Log Levels for Cinder Services " "call in microversion 3.32 was ignoring the server name filter (Change-Id " "`Iecb3faad9270f969185089cc291127b340483a46 `_)" msgstr "" #: ../../:1732 msgid "" "Rbd replication secondary device could set different user and keyring with " "primary cluster. Secondary secret_uuid value is configed in libvirt secret, " "and libvirtd using secondary secret reconnect to secondary cluster after " "Cinder failover host." msgstr "" #: ../../:1055 msgid "" "Re-added Infortrend Cinder volume driver. The Infortrend driver, removed in " "Cinder 12.0.0 (Queens), has been restored in this release." msgstr "" #: ../../:332 msgid "" "Reimage a volume: ``POST /v3/volumes/{volume_id}/action`` with the ``os-" "reimage`` action. This call will result in a 202 (Accepted) response, but " "if the image's ``disk_format`` would require conversion to be written to the " "volume, the volume will go to ``error`` status." msgstr "" #: ../../:666 stable/2023.2>:339 stable/zed>:225 #: xena-eom>:143 yoga-eom>:258 msgid "" "Removed the ability to create multiattach volumes by specifying " "`multiattach` parameter in the request body of a volume create operation. " "This functionality is unsafe, can lead to data loss, and has been deprecated " "since the Queens release. The recommended method for creating a multiattach " "volume is to use a volume type that supports multiattach. By default, " "volume types can only be created by the operator. Users who have a need for " "multiattach volumes should contact their operator if a suitable volume type " "is not available." msgstr "" #: ../../:893 msgid "" "Removed the ability to create volumes in a ScaleIO Storage Pool that has " "zero-padding disabled. A new configuration option had been added to override " "this new behavior and allow volume creation, but should not be enabled if " "multiple tenants will utilize volumes from a shared Storage Pool." msgstr "" #: ../../:505 stable/ussuri>:530 msgid "Request body::" msgstr "" #: ../../:77 current stable/2024.1>:231 msgid "Revert volume to snapshot" msgstr "" #: ../../:68 msgid "" "Revised the 'Extend Volume' process on the RAID Group to improve processing " "speed as follows:" msgstr "" #: ../../:908 msgid "" "Rolling back a volume to a snapshot overwrites the current volume with the " "data from the snapshot, and the time it takes to complete this operation " "increases with the size of the volume." msgstr "" #: ../../:1173 msgid "" "SPDK target and volume drivers have been updated with new SPDK specific RPC " "calls due to deprecation of some old RPC calls. Starting from Ussuri release " "SPDK release v19.10 or higher is required." msgstr "" #: ../../:386 msgid "Seagate driver: Added support for ``get_driver_options`` api call" msgstr "" #: ../../:134 stable/2023.1>:431 #: stable/2023.2>:152 stable/stein>:252 stable/stein>:889 stable/train>:37 #: stable/train>:759 stable/ussuri>:49 stable/ussuri>:767 stable/ussuri>:1349 #: stable/zed>:96 stable/zed>:258 victoria-eom>:37 victoria-eom>:893 #: wallaby-eom>:37 xena-eom>:57 xena-eom>:184 xena-eom>:872 yoga-eom>:139 #: yoga-eom>:291 msgid "Security Issues" msgstr "" #: ../../:73 msgid "" "See the `Fujitsu ETERNUS DX driver documentation `_ for details." msgstr "" #: ../../:722 msgid "" "See the `os-brick 2.10.4 release notes `_ for more " "information." msgstr "" #: ../../:528 msgid "" "See the `os-brick 2.10.5 release notes `_ for more " "information." msgstr "" #: ../../:222 msgid "" "See the `os-brick 2.8.6 release notes `_ for more " "information." msgstr "" #: ../../:139 msgid "" "See the `os-brick 2.8.7 release notes `_ for more " "information." msgstr "" #: ../../:578 msgid "" "See the `os-brick 3.0.3 release notes `_ for more " "information." msgstr "" #: ../../:1304 msgid "" "See the help text for these options for more information. The default value " "of each option is 60, which has been the default value of " "``periodic_interval``." msgstr "" #: ../../:714 msgid "" "Similarly, when creating an encrypted volume from a snapshot of an encrypted " "volume, if the amount of data in the original volume at the time the " "snapshot was created is very close to the gibibyte boundary given by the " "volume's size, it is possible for the data in the new volume to be silently " "truncated." msgstr "" #: ../../:1127 msgid "" "SmartCompression feature is disabled for the NexentaStor5 NFS driver. Thick " "provisioned volumes created as files containing zeros are not being " "compressed with standard compression if SmartCompression feature is enabled. " "This functionality will be fixed in a later release." msgstr "" #: ../../:699 msgid "" "So far, the behavior isn't anomalous; it's basically what you'd expect once " "you are aware that the encryption metadata must be stored in the volume and " "that it consumes some space." msgstr "" #: ../../:637 msgid "SolidFire driver now supports IPv6 for management IP." msgstr "" #: ../../:996 msgid "" "SolidFire driver: Driver no longer stores attach timestamp and instance as " "metadata on the storage array. Any metadata remaining in the array must be " "considered outdated and incorrect." msgstr "" #: ../../:1287 stable/ussuri>:1138 msgid "" "SolidFire supports Synchronous, Asynchronous and SnapshotsOnly replication " "modes. This adds the config option `solidfire:replication_mode` to specify " "the mode to be used by Cinder. Its value can be `Sync`, `Async` or " "`SnapshotsOnly`." msgstr "" #: ../../:186 stable/train>:1645 msgid "" "Solidfire fix extend volume with qos-Scaling to honor the increased size " "with increased iops on the extended volume." msgstr "" #: ../../:588 msgid "" "Some current policies that were over-general (that is, they governed both " "read and write operations on a resource) are being replaced by a set of new " "policies that provide greater granularity. The following policies are " "DEPRECATED and will be removed in the Yoga release:" msgstr "" #: ../../:578 msgid "" "Some current rules defined in the policy file are being DEPRECATED and will " "be removed in the Yoga release. You only need to worry about this if you " "have used any of these rules yourself in when writing custom policies, as " "you cannot rely on the following rules being pre-defined in the Yoga release." "" msgstr "" #: ../../:487 msgid "" "Some new backend storage drivers have been added, and many current drivers " "have added features and fixed bugs." msgstr "" #: ../../:640 msgid "Some points to keep in mind:" msgstr "" #: ../../:479 msgid "" "Starting with API microversion 3.64, an ``encryption_key_id`` attribute is " "included in the response body of volume and backup details when the " "associated volume is encrypted." msgstr "" #: ../../:488 msgid "" "Starting with API microversion 3.65, a ``consumes_quota`` field is included " "in the response body of volumes and snapshots to indicate whether the volume " "is using quota or not." msgstr "" #: ../../:464 msgid "" "Starting with API microversion 3.70, encrypted volumes can be transferred to " "a user in a different project. Prior to microversion 3.70, the transfer is " "blocked due to the inability to transfer ownership of the volume's " "encryption key. With microverson 3.70, ownership of the encryption key is " "transferred when the volume is transferred." msgstr "" #: ../../:482 msgid "Support for MySQL 5.5 has been dropped." msgstr "" #: ../../:800 msgid "" "Support for NetApp E-Series has been removed. The NetApp Unified driver can " "now only be used with NetApp Clustered Data ONTAP." msgstr "" #: ../../:349 msgid "" "Support for multiattach has been enabled for HPE MSA Storage since the 14.0." "0 release, but no release note was included to announce this change." msgstr "" #: ../../:971 msgid "Support for multiattach is enabled for HPE MSA Storage" msgstr "" #: ../../:512 msgid "Support for retype and volume migration for HPE Nimble Storage driver." msgstr "" #: ../../:168 msgid "" "Support for running Cinder in Windows operating systems has been deprecated " "because of retirement of the Winstackers project." msgstr "" #: ../../:803 msgid "" "Support for the ``cinder.database.migration_backend`` entrypoint, which " "provided for configurable database migration backends, has been removed. " "This was never exercised and was a source of unnecessary complexity." msgstr "" #: ../../:270 msgid "Supported multi-pools for Hitachi driver and OEM storage drivers." msgstr "" #: ../../:450 msgid "" "Swift backup driver: Added new configuration option " "``backup_swift_create_storage_policy`` for the Swift backup driver. If " "specified it will be used as the storage policy when creating the Swift " "Container, default value is None meaning it will not be used and Swift will " "use the system default. Please note that this only applies if a container " "doesn't exist as we cannot update the storage policy on an already existing " "container." msgstr "" #: ../../:797 msgid "" "TSM backup driver is removed. Please, migrate your backups before upgrade." msgstr "" #: ../../:825 msgid "The \"cinder-manage shell\" set of commands has been removed." msgstr "" #: ../../:789 msgid "" "The Block Storage API v2, which was deprecated in the Pike release, has been " "removed. If upgrading from a previous OpenStack release, it is recommended " "that you edit your ``/etc/cinder/api-paste.ini`` file to remove all " "references to v2. Additionally, the deprecated configuration option " "``enable_v2_api`` has been removed. If present in a configuration file, it " "will be silently ignored." msgstr "" #: ../../:419 msgid "" "The Block Storage API v2, which was deprecated way back in the Pike release, " "has been removed. We gently remind you that Pike was a long time ago, and " "that version 3.0 of the Block Storage API was designed to be completely " "compatible with version 2." msgstr "" #: ../../:1129 stable/ussuri>:1279 msgid "" "The Brocade Fibre Channel Zone Manager driver has been marked as unsupported " "and is now deprecated. It is subject to removal during the \"V\" development " "cycle, following the standard OpenStack deprecation policy. The config " "option ``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it in this release." msgstr "" #: ../../:746 msgid "" "The Brocade Fibre Channel Zone Manager driver was marked 'unsupported' in " "the Ussuri release because the vendor declined to support Python 3, whereas " "all OpenStack releases beginning with Ussuri support Python 3 only." msgstr "" #: ../../:784 msgid "" "The Brocade Fibre Channel Zone Manager driver was marked 'unsupported' in " "the Ussuri release, and it continues as 'unsupported' in this release. If " "you choose to use the driver, the configuration option " "``enable_unsupported_driver`` must be set to ``True`` in the ``fc-zone-" "manager`` section in cinder.conf to allow its use." msgstr "" #: ../../:697 msgid "" "The Cinder database can now only be upgraded with changes since the Ocata " "release. In order to upgrade from a version prior to that, you must now " "upgrade to at least Ocata first." msgstr "" #: ../../:1184 msgid "" "The Cinder database can now only be upgraded with changes since the Queens " "release. In order to upgrade from a version prior to that, you must now " "upgrade to at least Queens first." msgstr "" #: ../../:412 stable/ussuri>:426 msgid "" "The Cinder project team would like to point out some issues addressed by " "this release:" msgstr "" #: ../../:1249 msgid "" "The Cinder project wishes to clarify its policy concerning what versions of " "Ceph are supported by Cinder." msgstr "" #: ../../:1597 msgid "" "The DRBDManage driver is deprecated as of the Stein release and is removed " "in the Train release. Users should use the new LINSTOR driver instead." msgstr "" #: ../../:1388 msgid "" "The DRBDManage driver is now removed. Customers using the DRBDManage driver " "should not upgrade Cinder without first migrating all volumes from their " "DRBDManage backend to a supported storage backend such as LINSTOR. Failure " "to migrate volumes will result in not being able to access volumes backed by " "the DRBDManage storage backend." msgstr "" #: ../../:1383 msgid "" "The DataCore drivers were marked as unsupported in the Rocky release and " "have now been removed." msgstr "" #: ../../:863 msgid "" "The Datera driver now supports API v2.2, IOPS/GB and BW/GB settings, LDAP " "and CHAP, extended metadata attributes during volume creation and attachment." " Most retype operations do not detach volumes anymore. Manageable Snapshots " "can be listed. Flash and Hybrid capacity information added." msgstr "" #: ../../:1258 msgid "" "The Datera driver removed v2 API support and the usage of initiator-groups" msgstr "" #: ../../:1487 msgid "" "The Datera driver went under a major driver revamp/restructure and a new " "separate Datera Python-SDK requirement has been introduced" msgstr "" #: ../../:850 msgid "" "The Dell EMC PS Series volume driver which supports Dell PS Series " "(EqualLogic) Storage is moving to maintenance mode in S Release and will be " "removed in T Release." msgstr "" #: ../../:616 stable/stein>:843 msgid "" "The Dell EMC SC configuration option ``excluded_domain_ip`` has been " "deprecated and will be removed in a future release. Deployments should now " "migrate to the option ``excluded_domain_ips`` for equivalent functionality." msgstr "" #: ../../:507 msgid "" "The FlexGroup pool is only supported using ONTAP storage 9.8 or greater." msgstr "" #: ../../:703 msgid "" "The Fujitsu DX driver names have been updated to distinguish them from other " "Fujitsu storage. The module path ``cinder.volume.drivers.fujitsu`` should " "now be updated to ``cinder.volume.drivers.fujitsu.eternus_dx`` in ``cinder." "conf``. Support for the previous driver naming will continue to work, but " "will be removed in a future release." msgstr "" #: ../../:859 msgid "" "The FusionStorage driver has deprecated the configuration options " "\"dsware_isthin\", \"dsware_manager\", \"fusionstorageagent\", " "\"clone_volume_timeout\", \"pool_type\", and \"pool_id_filter\". These " "configuration options will be removed in the Train release(14.0.0)." msgstr "" #: ../../:1011 msgid "" "The HGST Flash Storage Suite Driver was marked unsupported in the Rocky " "release because their 3rd Party CI system was not meeting Cinder's " "requirements. The system has not started reporting so the driver is now " "removed as of the Stein release." msgstr "" #: ../../:767 msgid "" "The HGST Flash Suite storage driver has been removed after completion of its " "deprecation period without a reliable 3rd Party CI system being supported. " "Customers using the HGST Flash Suite driver should not upgrade Cinder " "without first migrating all volumes from their HGST backend to a supported " "storage backend. Failure to migrate volumes will result in no longer being " "able to access volumes backed by the HGST storage backend." msgstr "" #: ../../:1276 msgid "" "The HPE LeftHand driver has been marked as unsupported and is now deprecated." " ``enable_unsupported_drivers`` will need to be set to ``True`` in cinder." "conf to continue to use them." msgstr "" #: ../../:1575 msgid "" "The HPE LeftHand driver has been marked as unsupported and is now deprecated." " ``enable_unsupported_drivers`` will need to be set to ``True`` in cinder." "conf to continue to use them. The driver will be removed in the Ussuri " "release." msgstr "" #: ../../:1158 msgid "" "The HPE Lefthand Driver (iSCSI) was marked unsupported in the Train release " "as the StoreVirtual product line has gone EOL and the LeftHand OS no longer " "receives upgrades. The driver has been removed in this release. All data " "on backends powered by HPE LeftHand OS should be migrated to a supported " "storage backend before upgrading your Cinder installation." msgstr "" #: ../../:1204 stable/train>:1510 msgid "" "The HPE MSA driver options ``hpmsa_backend_name`` and ``hpmsa_backend_type`` " "options were deprecated in favor of ``hpmsa_pool_name`` and " "``hpmsa_pool_type`` to avoid confusion, and the ``hpmsa_api_protocol``, " "``hpmsa_verify_certificate``, and ``hpmsa_verify_certificate_path`` options " "were deprecated in favor of the standard ``driver_use_ssl``, " "``driver_ssl_cert_verify``, and ``driver_ssl_cert_path`` options. To retain " "the default behavior, add ``driver_use_ssl = true`` to back-end entries in " "``cinder.conf`` before the deprecated options are removed in a future " "release." msgstr "" #: ../../:468 msgid "" "The Huawei FusionStorage Cinder driver (dsware) now supports OceanStor 100D " "Storage." msgstr "" #: ../../:1103 msgid "" "The Huawei FusionStorage driver had previously been marked unsupported. The " "3rd Party CI has been restored, and the driver is now fully supported in the " "Ussuri release." msgstr "" #: ../../:1216 msgid "" "The Huawei Fusionstorage driver has been marked as unsupported and is now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use the driver." msgstr "" #: ../../:1522 msgid "" "The Huawei Fusionstorage driver has been marked as unsupported due to a lack " "of Python3.7 support and is now deprecated. ``enable_unsupported_driver`` " "will need to be set to ``True`` in the driver's section in cinder.conf to " "continue to use them. If Python3.7 support is not demonstrated, the driver " "will be removed in the 'U' development cycle." msgstr "" #: ../../:761 msgid "" "The IBM FlashSystem configuration options ``flashsystem_multipath_enabled`` " "was deprecated in the Mitaka release. It had no effect, so it can be safely " "removed and does not have a new equivalent config option." msgstr "" #: ../../:1223 msgid "" "The IBM Flashsystem drivers have been marked as unsupported and are now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use them." msgstr "" #: ../../:1531 msgid "" "The IBM Flashsystem drivers have been marked as unsupported and are now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use them. If the support " "status does not change, the drivers will be removed in the 'U' development " "cycle." msgstr "" #: ../../:1230 msgid "" "The IBM GPFS driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it." msgstr "" #: ../../:1539 msgid "" "The IBM GPFS driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it. If its support status " "does not change, it will be removed in the 'U' development cycle." msgstr "" #: ../../:1237 msgid "" "The IBM Storage drivers (XIV & DS8k) have been marked as unsupported and are " "now deprecated. ``enable_unsupported_driver`` will need to be set to " "``True`` in the driver's section in cinder.conf to continue to use them." msgstr "" #: ../../:1547 msgid "" "The IBM Storage drivers (XIV & DS8k) have been marked as unsupported and are " "now deprecated. ``enable_unsupported_driver`` will need to be set to " "``True`` in the driver's section in cinder.conf to continue to use them. If " "the support status does not change, the drivers will be removed in the 'U' " "development cycle." msgstr "" #: ../../:1244 msgid "" "The IBM Storwize drivers have been marked as unsupported and are now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use them." msgstr "" #: ../../:1555 msgid "" "The IBM Storwize drivers have been marked as unsupported and are now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use them. If the support " "status does not change, they will be removed in the 'U' development cycle." msgstr "" #: ../../:1122 stable/ussuri>:1272 msgid "" "The IET iSCSI target driver has been marked deprecated and will be removed " "in the \"V\" release. The IET iSCSI target project is no longer active and " "is not supported by all distributions. It is recommended to migrate to a " "supported distribution and iSCSI target prior to upgrading." msgstr "" #: ../../:717 msgid "" "The ITRI DISCO storage driver has been removed after completion of its " "deprecation period without a reliable 3rd Party CI system being supported. " "Customers using the ITRI DISCO driver should not upgrade Cinder without " "first migrating all volumes from their DISCO backend to a supported storage " "backend. Failure to migrate volumes will result in no longer being able to " "access volumes back by the ITRI DISCO storage backend." msgstr "" #: ../../:998 msgid "" "The ITRI DISCO storage driver was marked unsupported in Rocky due to 3rd " "Party CI not meeting Cinder's requirements. As a result the driver is " "removed starting from the Stein release." msgstr "" #: ../../:854 msgid "" "The LINBIT DRBDManage volume driver is moving to maintenance mode in Stein " "Release and will be removed in T Release." msgstr "" #: ../../:870 msgid "The LINSTOR Driver for Cinder now supports LINSTOR 0.9.12." msgstr "" #: ../../:1089 msgid "" "The LINSTOR driver for Cinder supports LINSTOR 0.9.12. The driver supports " "LINSTOR backend using REST API." msgstr "" #: ../../:1251 stable/train>:1563 msgid "" "The Lenovo driver options ``lenovo_backend_name`` and " "``lenovo_backend_type`` options were deprecated in favor of " "``lenovo_pool_name`` and ``lenovo_pool_type`` to avoid confusion, and the " "``lenovo_api_protocol``, ``lenovo_verify_certificate``, and " "``lenovo_verify_certificate_path`` options were deprecated in favor of the " "standard ``driver_use_ssl``, ``driver_ssl_cert_verify``, and " "``driver_ssl_cert_path`` options. To retain the default behavior, add " "``driver_use_ssl = true`` to back-end entries in ``cinder.conf`` before the " "deprecated options are removed in a future release." msgstr "" #: ../../:641 msgid "The NFS driver now supports the creation of encrypted volumes." msgstr "" #: ../../:727 msgid "" "The Nexenta Edge driver has been marked as unsupported and is now deprecated." " ``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it." msgstr "" #: ../../:863 msgid "" "The Nexenta Edge driver has been marked as unsupported and is now deprecated." " ``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it. If its support status " "does not change, it will be removed in the 'T' development cycle." msgstr "" #: ../../:1325 msgid "" "The Nexenta Edge storage driver has been removed after completion of its " "deprecation period without a reliable 3rd Party CI system being supported. " "Customers using the Nexenta Edge driver should not upgrade Cinder without " "first migrating all volumes from their Nexenta backend to a supported " "storage backend. Failure to migrate volumes will result in no longer being " "able to access volumes back by the Nexenta Edge storage backend." msgstr "" #: ../../:1770 msgid "" "The Nexenta Edge storage driver was marked unsupported in Stein due to 3rd " "Party CI not meeting Cinder's requirements. As a result the driver is " "removed starting from the Train release." msgstr "" #: ../../:717 msgid "" "The Nimble Storage became a part of the HPE family of Storage solutions. The " "cinder Nimble driver has been relocated to the ``cinder.volume.driver.hpe`` " "module to reflect this. The impact on operators is that the module path " "``cinder.volume.drivers.nimble.NimbleISCSIDriver`` and ``cinder.volume." "drivers.nimble.FCDriver`` should now be updated to ``cinder.volume.drivers." "hpe.nimble.NimbleISCSIDriver`` and ``cinder.volume.drivers.hpe.nimble." "NimbleFCDriver`` respectively in ``cinder.conf``" msgstr "" #: ../../:1588 msgid "" "The Oracle ZFSSA drivers have been been marked as unsupported and are now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use them. Oracle has " "indicated that they don't plan to continue to support the drivers so they " "will be removed in the 'U' development cycle." msgstr "" #: ../../:1371 msgid "" "The Oracle ZFSSA drivers have been marked as unsupported and are now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use them." msgstr "" #: ../../:1378 msgid "" "The PowerMax Cinder driver has removed the environment configuration option " "san_rest_port in favour of the Cinder standard option san_api_port." msgstr "" #: ../../:1781 msgid "" "The PowerMax for Cinder driver now implements noCopy mode for links between " "SnapVX source and target. This change will improve space efficiency by " "using pointers instead of copied tracks when source and target volumes are " "linked." msgstr "" #: ../../:1435 msgid "" "The Prophetstor driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it." msgstr "" #: ../../:1609 msgid "" "The Prophetstor driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it. If its support status " "does not change, it will be removed in the 'U' development cycle." msgstr "" #: ../../:711 yoga-eom>:751 msgid "" "The QNAP driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_drivers`` will need to be set to ``True`` in cinder." "conf to continue to use it." msgstr "" #: ../../:1413 msgid "" "The Sheepdog driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use the driver." msgstr "" #: ../../:1601 msgid "" "The Sheepdog driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use the driver. The driver is " "scheduled for removal in the 'U' release." msgstr "" #: ../../:1179 msgid "" "The Sheepdog driver was marked unsupported in the Train release and has now " "been removed. All data on Sheepdog backends should be migrated to a " "supported backend before upgrading your Cinder installation." msgstr "" #: ../../:109 stable/train>:1681 #: stable/ussuri>:1426 msgid "" "The SolidFire replication was fixed. Several bugs were addressed (creating " "replicated volumes from snapshots, from volumes, retype a volume to a " "replicated type, managing a volume to a replicated type, correctly updating " "portal info on failover/failback and some minor other fixes). Closes bugs " "#1834013, #1751932." msgstr "" #: ../../:942 msgid "" "The Solidfire cinder driver has been fixed to ensure delete happens on the " "correct volume." msgstr "" #: ../../:1067 msgid "" "The StorPool driver enables the ``multiattach`` and ``thin_provisioning`` " "capabilities." msgstr "" #: ../../:360 msgid "" "The Swift backup driver now supports sending a X-Service-Token header with a " "service token when the new ``backup_swift_service_auth`` config option is " "enabled. Please note that you still need to configure the ``[service_user]`` " "group and also set ``send_service_user_token`` to enable the behavior and " "not only the Swift backup driver option. Note ``send_service_user_token`` " "enables it globally and will also affect communication with Nova and Glance." msgstr "" #: ../../:734 msgid "" "The Tintri driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it." msgstr "" #: ../../:871 msgid "" "The Tintri driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it. If its support status " "does not change, it will be removed in the 'T' development cycle." msgstr "" #: ../../:1425 msgid "" "The Tintri storage driver has been removed after completion of its " "deprecation period without a reliable 3rd Party CI system being supported. " "Customers using the Tintri driver should not upgrade Cinder without first " "migrating all volumes from their Tintri backend to a supported storage " "backend. Failure to migrate volumes will result in no longer being able to " "access volumes backed by the Tintri storage backend." msgstr "" #: ../../:1794 msgid "" "The Tintri storage driver was marked unsupported in Stein due to 3rd Party " "CI not meeting Cinder's requirements. As a result the driver is removed " "starting from the Train release." msgstr "" #: ../../:1442 msgid "" "The Veritas Access driver has been marked as unsupported and is now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use it." msgstr "" #: ../../:1617 msgid "" "The Veritas Access driver has been marked as unsupported and is now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use it. If its support " "status does not change, it will be removed in the 'U' development cycle." msgstr "" #: ../../:1331 msgid "" "The Veritas Clustered NFS driver has been marked as unsupported and is now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` " "in the driver's section in cinder.conf to continue to use the driver. It " "its support status does not change the driver will be removed in the 'V' " "development cycle." msgstr "" #: ../../:1201 msgid "" "The Veritas Clustered NFS driver has been marked as unsupported and is now " "deprecated. ``enabled_unsupported_driver`` will need to be set to ``True`` " "in the driver's section in cinder.conf to continue to use the driver." msgstr "" #: ../../:741 msgid "" "The Veritas HyperScale driver has been marked as unsupported and is now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use it." msgstr "" #: ../../:879 msgid "" "The Veritas HyperScale driver has been marked as unsupported and is now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use it. If its support " "status does not change, it will be removed in the 'T' development cycle." msgstr "" #: ../../:1392 msgid "" "The Veritas HyperScale storage driver has been removed after completion of " "its deprecation period without a reliable 3rd Party CI system being " "supported. Customers using the Veritas HyperScale driver should not upgrade " "Cinder without first migrating all volumes from their Veritas backend to a " "supported storage backend. Failure to migrate volumes will result in no " "longer being able to access volumes backed by the Veritas HyperScale storage " "backend." msgstr "" #: ../../:1788 msgid "" "The Veritas HyperScale storage driver was marked unsupported in Stein due " "to 3rd Party CI not meeting Cinder's requirements. As a result the driver " "is removed starting from the Train release." msgstr "" #: ../../:1458 stable/ussuri>:1208 msgid "" "The Virtuozzo driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it." msgstr "" #: ../../:1625 stable/ussuri>:1339 msgid "" "The Virtuozzo driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it. If its support status " "does not change, it will be removed in the 'U' development cycle." msgstr "" #: ../../:734 msgid "" "The Zadara VPSA Driver has been updated to support json format and " "reorganized with new code layout. The module path ``cinder.volume.drivers." "zadara.ZadaraVPSAISCSIDriver`` should now be updated to ``cinder.volume." "drivers.zadara.zadara.ZadaraVPSAISCSIDriver`` in ``cinder.conf``." msgstr "" #: ../../:751 wallaby-eom>:1257 msgid "" "The `Ceph RADOS Block Device (RBD) `__ driver " "documentation has been updated to reflect this policy and explains it in " "more detail." msgstr "" #: ../../:791 msgid "" "The ``WindowsDriver`` was renamed in the Queens release to " "``WindowsISCSIDriver`` to avoid confusion with the SMB driver. The backwards " "compatibility for this has now been removed, so any cinder.conf settings " "still using ``cinder.volume.drivers.windows.windows.WindowsDriver`` must now " "be updated to use ``cinder.volume.drivers.windows.iscsi.WindowsISCSIDriver``." "" msgstr "" #: ../../:777 msgid "" "The ``[DEFAULT] db_driver`` config option has been removed. This was " "intended to allow configuration of the database driver, however, there is " "only one database driver present in-tree and out-of-tree database drivers " "are not supported." msgstr "" #: ../../:515 stable/ussuri>:540 msgid "" "The ``__DEFAULT__`` volume type may safely be renamed (or renamed and " "deleted) after you have run the online migrations as long as the " "``default_volume_type`` configuration option is set to a valid existing " "volume type." msgstr "" #: ../../:678 msgid "" "The ``cinder-manage db online_data_migrations`` command now returns exit " "status 2 in the case where some migrations failed (raised exceptions) and no " "others were completed successfully from the last batch attempted. This " "should be considered a fatal condition that requires intervention. Exit " "status 1 will be returned in the case where the ``--max-count`` option was " "used and some migrations failed but others succeeded (updated at least one " "row), because more work may remain for the non-failing migrations, and their " "completion may be a dependency for the failing ones. The command should be " "reiterated while it returns exit status 1, and considered completed " "successfully only when it returns exit status 0." msgstr "" #: ../../:387 msgid "" "The ``cinder-manage db sync`` command for this verison of cinder will add " "additional database indexes. Depending on database size and complexity, " "this will take time to complete for every single index to be created. On " "MySQL or MariaDB, these indexes will only be created if an index does not " "already exist with the same name:" msgstr "" #: ../../:1495 msgid "" "The ``cinder.quota.NestedDbQuotaDriver`` quota driver for handling nested " "projects is now deprecated. There is an OpenStack-wide effort to move to " "\"unified limits\" that will require changes in how quotas are handled for " "these types of configurations. The ``NestedDbQuotaDriver`` will continue to " "work until it is replaced with this new mechanism." msgstr "" #: ../../:811 msgid "" "The ``cinder.quota.NestedDbQuotaDriver`` quota driver was marked as " "deprecated in Train release and is eligible for removal since Ussuri release." " This release removes the NestedQuotaDriver support." msgstr "" #: ../../:456 stable/ussuri>:483 victoria-eom>:775 msgid "" "The ``default_volume_type`` configuration option is now required to have a " "value. The default value is ``__DEFAULT__``, so you should see no change in " "behavior whether or not you have set a value for ``default_volume_type``. " "See `Bug #1886632 `_ for " "more information about this change." msgstr "" #: ../../:692 stable/ussuri>:734 #: victoria-eom>:1270 msgid "" "The ``default_volume_type`` configuration option is required to have a value." " The default value is ``__DEFAULT__``." msgstr "" #: ../../:123 msgid "" "The ``enable_unsupported_driver`` option will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use the following three " "drivers." msgstr "" #: ../../:948 msgid "" "The ``image_service:store_id`` can only be set in the extra-specs for a " "volume-type when multiple glance stores are configured." msgstr "" #: ../../:1319 msgid "" "The ``periodic_interval`` configuration option still exists but its use is " "now restricted to providing a default periodicity for objects created from " "the ``cinder.service.Service`` class." msgstr "" #: ../../:1294 msgid "" "The ``periodic_interval`` configuration option was being used in too many " "places, and as a result, it had become difficult to tune specific periodic " "tasks without affecting other functionality. The following configuration " "options should now be used in place of ``periodic_interval``:" msgstr "" #: ../../:491 msgid "" "The ``storage_protocol`` treats all variants of the protocol name as the " "same regarding matches, so for example using FC, fc, or fibre_channel will " "be treated equally in the scheduler, be it when filtering using the volume " "type's extra specs or when using filter and goodness functions." msgstr "" #: ../../:1231 msgid "" "The ``volume_extension:volume_type_encryption`` policy, which was deprecated " "in Stein, has been un-deprecated for the convenience of operators who would " "like to set the policies for the create, get, update, and delete operations " "for a volume type's encryption type in one place. The default value for " "this policy target has not changed." msgstr "" #: ../../:1095 msgid "The `default_volume_type` option is unset in cinder.conf" msgstr "" #: ../../:623 msgid "" "The ability to specify a backup driver by module name was deprecated in the " "Queens release and the ability has now been removed. Any configuration in " "cinder.conf still using the module path should be updated to include the " "full class name. For example, ``cinder.backup.drivers.swift`` should be " "updated to ``cinder.backup.drivers.swift.SwiftBackupDriver``." msgstr "" #: ../../:600 msgid "" "The cinder backup service has added support for the popular Zstandard " "compression algorithm. (The default is the venerable Deflate (zlib) " "algorithm.)" msgstr "" #: ../../:1282 msgid "" "The cinder options associated with throttling are " "``volume_copy_blkio_cgroup_name`` and ``volume_copy_bps_limit``. They are " "described in the `sample cinder configuration file `_ " "for the Wallaby release." msgstr "" #: ../../:692 msgid "" "The cinder team is working on a throttling solution using cgroup v2, but it " "was not ready at the time of this release. The solution is expected to be " "backported to a future release in the Xena series. This issue is being " "tracked as `Bug #1942203 `_." msgstr "" #: ../../:651 msgid "" "The cinder team is working on a throttling solution using cgroup v2, but it " "was not ready at the time of this release. The solution is expected to be " "backported to a future release in the Yoga series. This issue continues to " "be tracked as `Bug #1942203 `_." msgstr "" #: ../../:586 xena-eom>:458 msgid "" "The cinder-manage command now includes a new ``quota`` category with two " "possible actions ``check`` and ``sync`` to help administrators manage out of " "sync quotas on long running deployments." msgstr "" #: ../../:1268 msgid "" "The cinder-volume service currently depends on `Linux Kernel Control Groups " "(cgroups) version 1 `_ to control i/o throttling during some volume-copy " "and image-convert operations. At the time of this release, some Linux " "distributions may have changed to using `cgroups v2 `_ by default. Thus, you may " "need to take explicit steps to ensure that **cgroups v1** is enabled on any " "OpenStack nodes running the cinder-volume service. This may entail setting " "specific Linux kernel parameters for these nodes. Consult your Linux " "distribution's documentation for details." msgstr "" #: ../../:682 msgid "" "The cinder-volume service currently depends on `Linux Kernel Control Groups " "(cgroups) version 1 `_ to control i/o throttling during some volume-copy " "and image-convert operations. Some Linux distributions, however, have " "changed to using `cgroup v2 `_ by default and may have discontinued cgroups v1 " "support completely. Consult your Linux distribution's documentation for " "details." msgstr "" #: ../../:641 msgid "" "The cinder-volume service depends on `Linux Kernel Control Groups (cgroups) " "version 1 `_ to control i/o throttling during some volume-copy and image-" "convert operations. Some Linux distributions, however, have changed to " "using `cgroup v2 `_ by default and may have discontinued cgroups v1 support " "completely. Consult your Linux distribution's documentation for details." msgstr "" #: ../../:963 msgid "" "The compressed image of a volume will be stored in the Image service " "(Glance) with the ``container_format`` image property of ``compressed``. " "See the `Image service documentation `_ for more information about this image container format." msgstr "" #: ../../:1633 msgid "" "The config option ``vmware_storage_profile`` is now deprecated and ignored. " "Setting this option results in performance degradation of the controller and " "put lot of load on vCenter server." msgstr "" #: ../../:777 msgid "" "The config options ``iscsi_ip_address``, ``iscsi_port``, ``target_helper``, " "``iscsi_target_prefix`` and ``iscsi_protocol`` were deprecated in the Queens " "release and have now been removed. Deployments should now used the more " "general ``target_ip_address``, ``target_port``, ``target_helper``, " "``target_prefix`` and ``target_protocol`` options." msgstr "" #: ../../:796 msgid "" "The configuration option ``enable_v3_api`` has been removed from this " "release due to the fact that v3 is now the only version of the Block Storage " "API available. If present in a configuration file, it will be silently " "ignored as the v3 API is now enabled unconditionally." msgstr "" #: ../../:1262 msgid "" "The configuration option ``rbd_keyring_conf`` for the Ceph cinder driver " "presents a security risk and the option is hereby deprecated and scheduled " "to be removed early in the 'V' development cycle, following the standard " "OpenStack deprecation policy. For more information, see `OSSN-0085 `_: Cinder configuration option can " "leak secret key from Ceph backend." msgstr "" #: ../../:1503 msgid "" "The configuration option ``sf_allow_template_caching`` for the SolidFire " "driver has been removed. Use ``image_volume_cache`` enabled equals ``True`` " "for a better template image cache that is managed from Cinder." msgstr "" #: ../../:809 msgid "" "The database migration engine has changed from `sqlalchemy-migrate`__ to " "`alembic`__. For most deployments, this should have minimal to no impact and " "the switch should be mostly transparent. The main user-facing impact is the " "change in schema versioning. While sqlalchemy-migrate used a linear, integer-" "based versioning scheme, which required placeholder migrations to allow for " "potential migration backports, alembic uses a distributed version control-" "like schema where a migration's ancestor is encoded in the file and branches " "are possible. The alembic migration files therefore use an arbitrary UUID-" "like naming scheme and the ``cinder-manage db sync`` command now expects " "such a version when manually specifying the version that should be applied. " "For example::" msgstr "" #: ../../:1449 msgid "" "The db migration script will create a volume type named ``__DEFAULT__`` The " "online migration will migrate all existing untyped volumes, snapshots to the " "``__DEFAULT__`` type. An invalid/non-existent type specified with " "`default_volume_type` option in cinder.conf will result in " "VolumeTypeNotFoundByName exception." msgstr "" #: ../../:438 msgid "The default policy configuration has been extensively rewritten." msgstr "" #: ../../:516 yoga-eom>:686 msgid "" "The default setting for both policies allow an administrator or the volume " "owner to perform the associated action. See the `Policy configuration " "`_ documentation in the `Cinder Service Configuration` guide for " "details." msgstr "" #: ../../:239 stable/ussuri>:349 victoria-eom>:816 msgid "" "The default value of the configuration option, ``glance_num_retries``, has " "been changed to 3 in this release. Its former value was 0. The option " "controls how many times to retry a Glance API call in response to a HTTP " "connection failure, timeout or ServiceUnavailable status. By this change, " "Cinder can be more resilient to temporary failure and continue the request " "if a retry succeeds." msgstr "" #: ../../:1245 msgid "" "The default values for these policies have also not changed. See the " "`sample Cinder policy file `_ for more information." "" msgstr "" #: ../../:568 msgid "" "The details of this project are described in `Policy Personas and " "Permissions `_ in the `Cinder Service Configuration Guide`. " " We encourage you to read through that document. The following is only a " "summary." msgstr "" #: ../../:1177 msgid "" "The driver for Datera's Storage Systems has been marked as unsupported and " "is now deprecated. ``enable_unsupported_driver`` will need to be set to " "``True`` in the driver's section in cinder.conf to continue to use it." msgstr "" #: ../../:1487 msgid "" "The driver for Datera's Storage Systems has been marked as unsupported and " "is now deprecated. ``enable_unsupported_driver`` will need to be set to " "``True`` in the driver's section in cinder.conf to continue to use it. If " "its support status does not change, it will be removed in the 'U' " "development cycle." msgstr "" #: ../../:1289 msgid "" "The driver has been tested against the first Release Candidate for the " "cinder Victoria release, but it does not have ongoing third-party CI. If you " "use this driver, and would be interested in running third-party CI for it, " "please contact the Cinder project team." msgstr "" #: ../../:438 msgid "" "The drivers can only be configured with REST client when using ONTAP storage " "9.11.1 or newer." msgstr "" #: ../../:1025 msgid "" "The efficiency of revert-to-snapshot depends upon the Ceph storage backend " "in use, particularly whether or not BlueStore is being used in your Ceph " "installation." msgstr "" #: ../../:916 msgid "" "The efficiency of revert-to-snapshot is also dependent upon the Ceph storage " "backend in use, namely, whether or not BlueStore is being used in your Ceph " "installation." msgstr "" #: ../../:751 msgid "" "The fix for `Bug #1823200 `_ " "requires ``os-brick`` >= 2.10.3 but < 2.11.0." msgstr "" #: ../../:239 msgid "" "The fix for `Bug #1823200 `_ " "requires ``os-brick`` >= 2.8.5 but < 2.9.0." msgstr "" #: ../../:759 msgid "" "The fix for `Bug #1823200 `_ " "requires ``os-brick`` >= 3.0.2 but < 3.1.0." msgstr "" #: ../../:792 msgid "" "The fix for `Bug #1823200 `_ " "requires ``os-brick`` version 3.1.0 or greater." msgstr "" #: ../../:173 msgid "" "The following drivers have been marked as unsupported and are now deprecated." "" msgstr "" #: ../../:133 msgid "" "The following drivers have been marked as unsupported and are now deprecated." " ``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use these drivers." msgstr "" #: ../../:1185 msgid "" "The following drivers were classified as unsupported in the Train release " "and continue as unspported in this release. See the \"Known Issues\" " "section of this document for details." msgstr "" #: ../../:1043 msgid "" "The following drivers were classified as unsupported in the Train release " "and continue as unspported in this release:" msgstr "" #: ../../:1315 msgid "" "The following drivers were deprecated in the Train release but have not yet " "been removed. They continue as unsupported and deprecated in this release. " "See the \"Known Issues\" section of this document for details." msgstr "" #: ../../:854 msgid "" "The following policies have been DEPRECATED in this release and will be " "removed in Yoga:" msgstr "" #: ../../:840 msgid "" "The following policy rules have been DEPRECATED in this release and will be " "removed in Yoga:" msgstr "" #: ../../:159 msgid "" "The following three drivers were marked unsupported. These drivers are " "deprecated and will be removed in a future release." msgstr "" #: ../../:746 msgid "" "The format version of a qcow2 can be determined by looking for the " "``compat`` field in the output of the ``qemu-img info`` command. A version 2 " "format image will report ``compat=0.10``, whereas a qcow2 in version 3 " "format will report ``compat=1.1``." msgstr "" #: ../../:597 msgid "" "The handling of the default volume type for a cinder installation has been " "improved in this release." msgstr "" #: ../../:680 msgid "" "The issue is partially fixed in the current release (\"partially\" because " "in specific circumstances, an operator may need to take some actions outside " "the normal upgrade process). See the \"Upgrade Notes\" for more information." "" msgstr "" #: ../../:132 msgid "" "The legacy ``sqlalchemy-migrate`` migrations, which have been deprecated " "since Xena, have been removed. There should be no end-user impact." msgstr "" #: ../../:238 msgid "The maximum length of a specified value is as follows:" msgstr "" #: ../../:1092 msgid "" "The new driver adds 'linstor_autoplace_count' configuration option that " "specifies the number of volume replicas." msgstr "" #: ../../:1301 msgid "" "The notifications continue to be published to the above during the " "deprecation period. Beginning with this release, the ``os-reset_status`` " "notifications are also sent to the following *standard* publisher_ids:" msgstr "" #: ../../:415 msgid "" "The online data migrations for Train have been updated to address an upgrade " "issue (`Bug #1893107 `_). " "The issue does not manifest itself in the Train release of cinder, but under " "specific circumstances it can prevent a cinder database upgrade from Train " "to Ussuri. See the \"Upgrade Notes\" and \"Bug Fixes\" sections below for " "more information." msgstr "" #: ../../:490 msgid "" "The online database migrations in this release require the existence of a " "volume type named ``__DEFAULT__``. A ``__DEFAULT__`` volume type was " "created as part of your original installation of/upgrade to a Train release " "of cinder. If you have renamed (or renamed and deleted) the ``__DEFAULT__`` " "volume type, you must re-create it before running the online migrations. " "(If you renamed it, you don't have to un-rename it; you can create a new one " "just for the purposes of the online database migration.)" msgstr "" #: ../../:876 msgid "The online documentation has been updated to reflect these changes." msgstr "" #: ../../:950 msgid "" "The only accelerator supported in this release is Intel QuickAssist " "Technology (QAT), which produces a compressed file in gzip format. Refer to " "this `Cinder documentation `_ for more information about " "using this feature." msgstr "" #: ../../:981 msgid "" "The optional driver feature \"Snapshot Attachment\" has been removed from " "the `Cinder Driver Support Matrix `_. It is an enhancment used for backups, it " "is not exposed via the Block Storage API, and its presence in the Support " "Matrix was misleading." msgstr "" #: ../../:649 msgid "" "The oslo.middleware /healthcheck is now activated by default in the Cinder " "api-paste.ini. Operators can use it to configure HAproxy or the monitoring " "of Cinder APIs. Edit the ``api-paste.ini`` file and remove any healthcheck " "entries to disable this functionality." msgstr "" #: ../../:642 msgid "" "The policy file to be used may be specified in the ``/etc/cinder/cinder." "conf`` file in the ``[oslo_policy]`` section as the value of the " "``policy_file`` configuration option. That way there's no question what file " "is being used." msgstr "" #: ../../:22 stable/train>:217 stable/ussuri>:244 #: victoria-eom>:424 wallaby-eom>:766 msgid "The policy is named ``group:reset_group_snapshot_status``." msgstr "" #: ../../:574 msgid "" "The primary change in the Xena release is that cinder's default policy " "configuration will recognize the ``reader`` role on a project. Additionally," msgstr "" #: ../../:657 msgid "" "The sample file is YAML (because unlike JSON, YAML allows comments). If you " "prefer, you may use a JSON policy file." msgstr "" #: ../../:233 msgid "The specified value must include the following variables:" msgstr "" #: ../../:220 msgid "The specified value must start with ``HBSD-``." msgstr "" #: ../../:496 msgid "" "The storage protocol reporting via the REST API will be now the same for " "them all, using the preferred naming, FC, NVMe-oF, iSCSI, NFS..." msgstr "" #: ../../:1021 msgid "" "The time it takes to complete the revert-to-snapshot operation increases " "with the size of the volume. It is faster to create a new volume from a " "snapshot." msgstr "" #: ../../:833 msgid "" "The unsupported driver removal policy has been revised. See the \"Known " "Issues\" section of this document for more information." msgstr "" #: ../../:862 stable/ussuri>:1381 msgid "" "The volume-transfers list calls (``GET /v3/{project_id}/volume-transfers``, " "``GET /v3/{project_id}/volume-transfers/detail``) were not recognizing " "``name`` as a filterable attribute. That has been fixed in the current " "release." msgstr "" #: ../../:434 msgid "" "The volume-type detail response has been enhanced to include non-sensitive " "\"extra-specs\" information in order to provide more data for automated " "systems to select a volume type." msgstr "" #: ../../:1097 msgid "Then the volume will be assigned the ``__DEFAULT__`` type." msgstr "" #: ../../:700 msgid "" "There is a race condition between the delete attachment and delete volume " "operations that has been observed when running cinder-csi. This race can " "leave deleted volumes stuck as attached to instances. The cinder team is " "working on a solution which is expected to be backported to a future release " "in the Xena series. The issue is being tracked as `Bug #1937084 `_." msgstr "" #: ../../:697 stable/ussuri>:739 #: victoria-eom>:1275 msgid "" "There must always be at least one volume-type defined in a Cinder " "installation. This is enforced by the type-delete call." msgstr "" #: ../../:20 current msgid "" "There was a problem where the volume could not be deleted because the copy " "session information acquired by SMI-S IF from ETERNUS DX Storage, which was " "cached and did not reflect the information that had just been executed." msgstr "" #: ../../:84 stable/train>:335 stable/ussuri>:450 #: victoria-eom>:674 msgid "" "This PowerMax driver moves the legacy shared volume from the masking view " "structure in Ocata and prior releases (when SMI-S was supported) to staging " "masking view(s) in Pike and later releases (U4P REST). In Ocata, the live " "migration process shared the storage group, containing the volume, among the " "different compute nodes. In Pike, we changed the masking view structure to " "facilitate a cleaner live migration process where only the intended volume " "is migrated without exposing other volumes in the storage group. The staging " "storage group and masking views facilitate a seamless live migration " "operation in upgraded releases." msgstr "" #: ../../:1004 msgid "" "This PowerMax driver now puts the unmanaged \"orphan\" volume in a storage " "group called OS-Unmanaged. It is not possible to query a volume's associated " "snapvx snapshots using the PowerMax management software, unless it belongs " "to a storage group." msgstr "" #: ../../:94 current msgid "" "This change also preserves the stderr that was lost previously in order to " "ease debugging." msgstr "" #: ../../:1689 stable/ussuri>:1434 msgid "" "This change fixes bug 1845483 - 3PAR: For Peer Persistence, add policy " "options in RCG. Following options are added after Remote Copy Group (RCG) is " "created: autoFailover, pathManagement, autoRecover" msgstr "" #: ../../:50 current stable/2024.1>:17 msgid "" "This change is to update the live migration ability in environments using " "PowerMax. In previous 2023.1 version, the live migration fails without a " "pool name. This update add the ability of live migration without a pool name." "" msgstr "" #: ../../:939 msgid "" "This feature is not directly user-facing. To enable it, an operator must " "add the field ``image_service:store_id`` in the volume-type extra-specs. " "The value of the field is a valid store identifier (``id``) configured in " "Glance, which may be discovered by making a ``GET /v2/info/stores`` call to " "the Image Service API." msgstr "" #: ../../:245 wallaby-eom>:791 msgid "" "This helps deployments with a large number of volumes and prevent issues on " "deployments with a growing number of volumes at the small cost of a slightly " "less accurate stats being reported to the scheduler." msgstr "" #: ../../:230 msgid "This is replaced with the host name of the connecting node." msgstr "" #: ../../:517 msgid "" "This migration requires the existence of a ``__DEFAULT__`` volume type. If " "you have renamed (or renamed and deleted) the ``__DEFAULT__`` volume type in " "Train, you must re-create it before running the online migrations. (If you " "renamed it, you don't have to un-rename it; you can create a new one just " "for the purposes of the online database migration.)" msgstr "" #: ../../:1264 xena-eom>:678 yoga-eom>:637 msgid "" "This note applies to deployments that are using the cinder configuration " "option ``volume_copy_bps_limit`` in its non-default value (the default is 0)." "" msgstr "" #: ../../:320 msgid "This option affects three Block Storage API calls:" msgstr "" #: ../../:24 current msgid "" "This problem has been addressed through improvements in information " "retrieval." msgstr "" #: ../../:14 stable/train>:209 stable/ussuri>:236 #: victoria-eom>:416 wallaby-eom>:758 msgid "" "This release contains a fix for `Bug #1908315 `_, which changes the default value of the policy " "governing the Block Storage API action `Reset group snapshot status `_ " "to make the action administrator-only. This policy was inadvertently " "changed to be admin-or-owner during the Queens development cycle." msgstr "" #: ../../:421 msgid "" "This release contains a partial fix for an upgrade issue. If you are " "upgrading a Train deployment of cinder to Ussuri, under specific " "circumstances you may need to take actions outside the normal upgrade " "process in order to accomplish a successful upgrade. In particular, there " "may be changes you must make in your Train deployment **before** you upgrade." " See the \"Upgrade Notes\" and \"Bug Fixes\" sections of these release " "notes for details." msgstr "" #: ../../:423 stable/ussuri>:429 msgid "" "This release improves the handling of the ``__DEFAULT__`` volume-type (see " "\"Other Notes\", below) and fixes `Bug #1879578 `_, in which the default type was applied too " "aggressively (see the discussion of this issue in \"Bug Fixes\", below)." msgstr "" #: ../../:974 msgid "" "This release includes support for Glance automatic image colocation. When a " "volume originally created from an image is uploaded to the Image service, " "Cinder passes Glance a reference to the original image. Glance may use this " "information to colocate the new image data in the same image store(s) as the " "original image data. Consult the Glance documentation for more information." msgstr "" #: ../../:934 msgid "" "This release includes support for Glance multiple stores. An operator may " "now specify which Glance store will be used when a volume is uploaded to " "Glance as an image. Some details about this feature:" msgstr "" #: ../../:435 stable/train>:41 stable/ussuri>:53 #: stable/zed>:262 victoria-eom>:41 wallaby-eom>:41 xena-eom>:188 yoga-eom>:295 msgid "" "This release introduces a new configuration option, ``vmdk_allowed_types``, " "that specifies the list of VMDK image subformats that Cinder will allow in " "order to prevent exposure of host information by modifying the named extents " "in a VMDK image. The default setting allows only the 'streamOptimized' and " "'monolithicSparse' subformats, which do not use named extents." msgstr "" #: ../../:379 stable/train>:27 stable/ussuri>:39 #: stable/zed>:248 victoria-eom>:27 wallaby-eom>:27 xena-eom>:174 yoga-eom>:281 msgid "" "This release introduces a new configuration option, ``vmdk_allowed_types``, " "that specifies the list of VMDK image subformats that Cinder will allow. " "The default setting allows only the 'streamOptimized' and 'monolithicSparse' " "subformats, which do not use named extents." msgstr "" #: ../../:465 msgid "" "This release modifies the online database migrations to address an an " "upgrade issue (`Bug #1893107 `_). The issue does not manifest itself in the Train release of " "cinder, but under specific circumstances it can prevent a cinder database " "upgrade from Train to Ussuri." msgstr "" #: ../../:492 msgid "" "This release partially fixes an upgrade issue (`Bug #1893107 `_) that under some circumstances could " "prevent a cinder database upgrade from Train to Ussuri. The issue would " "occur if you had upgraded an unpurged Stein database to Train, and then " "attempted to upgrade the still unpurged database to Ussuri. If this " "describes your situation, please read further, because in order to avert " "this issue, there are some steps you may need to take in your **Train** " "deployment *before* you upgrade to Ussuri." msgstr "" #: ../../:601 stable/ussuri>:639 #: victoria-eom>:1006 msgid "" "This release restores the intended behavior, which is described as follows:" msgstr "" #: ../../:717 msgid "" "This release updates the os-brick library used by Cinder to version 2.10.4 " "to correct a problem with the fix for `Bug #1823200 `_ in the previous os-brick release." msgstr "" #: ../../:522 msgid "" "This release updates the os-brick library used by Cinder to version 2.10.5 " "to correct hopefully the final problem with the fix for `Bug #1823200 `_ in the previous os-brick release." "" msgstr "" #: ../../:217 msgid "" "This release updates the os-brick library used by Cinder to version 2.8.6 to " "correct a problem with the fix for `Bug #1823200 `_ in the previous os-brick release. It does not " "contain any Cinder code changes." msgstr "" #: ../../:133 msgid "" "This release updates the os-brick library used by Cinder to version 2.8.7 to " "correct hopefully the final problem with the fix for `Bug #1823200 `_ in the previous os-brick release." msgstr "" #: ../../:572 msgid "" "This release updates the os-brick library used by Cinder to version 3.0.3 to " "correct hopefully the final problem with the fix for `Bug #1823200 `_ in the previous os-brick release." msgstr "" #: ../../:337 msgid "" "This requires that ``nvmeof_conn_info_version`` configuration option is set " "to ``2`` as well." msgstr "" #: ../../:33 stable/train>:228 stable/ussuri>:255 #: victoria-eom>:435 wallaby-eom>:777 msgid "" "This setting is *not recommended* by the Cinder project team, as it may " "allow end users to put a group snapshot into an invalid status with " "indeterminate consequences." msgstr "" #: ../../:472 stable/ussuri>:502 msgid "" "This upgrade notice applies to you only if **all** of the following " "conditions are met:" msgstr "" #: ../../:1309 msgid "" "This will allow consumers of these notifications to make a smooth transition." " In the Victoria release, ``os-reset_status`` notifications will *only* be " "sent to the standard publisher_ids." msgstr "" #: ../../:654 msgid "" "This will generate a file named ``policy.yaml`` in the ``etc/cinder`` " "directory of your checked-out Cinder repository." msgstr "" #: ../../:740 msgid "" "Thus, we recommend that operators who want to manage a storage object in an " "NFS-based storage backend as a cinder volume should not do this with a qcow2 " "image that is in the version 2 format, but should change it to the qcow2-v3 " "format first." msgstr "" #: ../../:826 msgid "" "To address backwards compatibility, the new rules added to the volume_type." "py policy file, default to the existing rule, ``volume_extension:" "volume_type_encryption``, if it is set to a non-default value." msgstr "" #: ../../:647 msgid "" "To find out what policies are available and what their default values are, " "you can generate a sample policy file. To do this, you must have a local " "copy of the Cinder source code repository. From the top level directory, run " "the command::" msgstr "" #: ../../:16 current msgid "" "To improve the volume deletion process, add a step to check associated copy " "sessions. Additionally, it also improves the process of retrieving storage-" "managed volume numbers." msgstr "" #: ../../:245 stable/train>:1366 msgid "" "Two new checks are added to the ``cinder-status upgrade check`` CLI to " "ensure that online data migrations from Queens onward have been completed." msgstr "" #: ../../:678 msgid "" "Two new policies are introduced to govern the volume reimage functionality " "introduced with microversion 3.68:" msgstr "" #: ../../:509 msgid "Two new policies are introduced to govern this functionality:" msgstr "" #: ../../:730 msgid "" "Under some circumstances, NFS-based backend drivers will store a volume as a " "qcow2 image. Thus cinder allows for the possibility that an operator may " "choose to manage a storage object in an NFS-based backend that is a qcow2 " "image." msgstr "" #: ../../:815 wallaby-eom>:106 xena-eom>:155 #: yoga-eom>:402 msgid "" "Unified how cinder calculates the virtual free storage space for a pool. " "Previously Cinder had 2 different mechanisms for calculating the virtual " "free storage. Now both the Capacity Filter and the Capacity Weigher use the " "same mechanism, which is based upon the defined terms in https://specs." "openstack.org/openstack/cinder-specs/specs/queens/provisioning-improvements." "html" msgstr "" #: ../../:79 current stable/2024.1>:233 msgid "Unmanage volumes" msgstr "" #: ../../:1100 msgid "" "Update group (`#1876133 `_)" msgstr "" #: ../../:31 current stable/2023.1>:102 #: stable/2023.1>:371 stable/2023.2>:115 stable/2024.1>:108 stable/stein>:10 #: stable/stein>:129 stable/stein>:213 stable/stein>:235 stable/stein>:402 #: stable/stein>:612 stable/train>:23 stable/train>:205 stable/train>:452 #: stable/train>:713 stable/train>:747 stable/train>:845 stable/train>:1136 #: stable/ussuri>:35 stable/ussuri>:232 stable/ussuri>:345 stable/ussuri>:479 #: stable/ussuri>:755 stable/ussuri>:1079 stable/zed>:64 stable/zed>:142 #: stable/zed>:244 stable/zed>:478 victoria-eom>:23 victoria-eom>:238 #: victoria-eom>:412 victoria-eom>:766 wallaby-eom>:23 wallaby-eom>:164 #: wallaby-eom>:316 wallaby-eom>:730 xena-eom>:25 xena-eom>:170 xena-eom>:755 #: yoga-eom>:107 yoga-eom>:197 yoga-eom>:277 yoga-eom>:674 msgid "Upgrade Notes" msgstr "" #: ../../:548 msgid "" "Upgrade to Ussuri, but run the online database migrations **before** you run " "the db_sync. (The normal ordering is to run db_sync first, and then run the " "online migrations.)" msgstr "" #: ../../:514 msgid "" "Upgrade your Train deployment to cinder 15.4.0 or more recent and re-run the " "online database migrations in your Train deployment." msgstr "" #: ../../:729 msgid "" "Upgrades are not affected by the new functionality whereby a project_id is " "no longer required in API URLs. The legacy behavior in which a project_id is " "included in the URL continues to be supported." msgstr "" #: ../../:322 msgid "" "Upload volume to image: ``POST /v3/volumes/{volume_id}/action`` with the " "``os-volume_upload_image`` action. This call will result in a 400 (Bad " "Request) response when an image ``disk_format`` that would require " "conversion is requested." msgstr "" #: ../../:218 msgid "" "Usable characters are alphanumerics, \".\", \"@\", \"_\", \":\", \"-\", " "\"{\" and \"}\". \"{\" and \"}\" can be used only in variables." msgstr "" #: ../../:830 msgid "" "Use of JSON formatted policy files was deprecated by the ``oslo.policy`` " "library during the Victoria development cycle. As a result, this deprecation " "is being noted in the Wallaby cycle with an anticipated future removal of " "JSON formatted file support by ``oslo.policy``. As such operators will need " "to convert to YAML policy files. Use the `oslopolicy-convert-json-to-yaml " "`_ tool to convert the existing JSON formatted policy file to " "YAML in a backward compatible way." msgstr "" #: ../../:558 msgid "" "Use the directions above if you need to re-create the ``__DEFAULT__`` volume " "type." msgstr "" #: ../../:174 xena-eom>:765 yoga-eom>:699 msgid "" "Using the v2 clone format for cloned volumes allows volumes with dependent " "images to be moved to the trash - where they remain until purged - and allow " "the RBD driver to postpone the deletion until the volume has no dependent " "images. Configuring the trash purge is recommended to avoid wasting space " "with these trashed volumes. Since the Ceph Octopus release, the trash can be " "configured to automatically purge on a defined schedule. See the ``rbd trash " "purge schedule`` commands in the `rbd manpage `_." msgstr "" #: ../../:600 msgid "" "VMware VMDK driver now supports a config option ``vmware_storage_profile`` " "to specify a list with names of storage profiles to be monitored for " "capacity." msgstr "" #: ../../:1473 msgid "" "VMware vmdk driver: The collection of volume stats, which had been disabled, " "may now be turned on by using the ``vmware_enable_volume_stats`` " "configuration option. The default for this option is False (no stats " "collection). Be aware that enabling volume stats may cause performance " "issues under high load." msgstr "" #: ../../:1215 msgid "" "VMware vmdk driver: The vmware vmdk driver had its get_volume_stats removed " "in a previous release due to a potential performance hit of 20% at a high " "load. The problem with reporting ``unknown`` back to the scheduler, is that " "it effectively removes cinder's ability to properly schedule based on " "capacity utilization. When this driver is enabled in a heterogenous " "environment without properly reporting utilization statistics, the " "scheduler's capacity filter will always allow this driver to service a " "provisioning request. Without reporting the backend stats, the capacity " "filter also can't determine the reserved_percentage as well as the " "max_over_subscription_ratio. To enable the collection of stats set " "``vmware_enable_volume_stats`` to True in the driver section of cinder.conf. " " The default setting is False. Keep in mind that there may be a degradation " "in performance on the vcenter when enabling this setting." msgstr "" #: ../../:1048 stable/ussuri>:1191 #: stable/ussuri>:1321 msgid "Veritas ACCESS iSCSI driver" msgstr "" #: ../../:1056 msgid "Veritas Clustered NFS driver" msgstr "" #: ../../:735 msgid "" "Version 3 of the qcow2 format has been the default for qcow2 creation in " "qemu-img since QEMU-1.7 (December 2013), and operating system vendors are " "discussing discontinuing (or limiting) support of the version 2 format in " "upcoming releases." msgstr "" #: ../../:1049 stable/ussuri>:1192 #: stable/ussuri>:1322 msgid "Virtuozzo Storage driver" msgstr "" #: ../../:833 msgid "" "Volume Manager now uses the configuration option ``init_host_max_objects`` " "retrieval to set max number of volumes and snapshots to be retrieved per " "batch during volume manager host initialization. Query results will be " "obtained in batches from the database and not in one shot to avoid extreme " "memory usage. Default value is 0 and disables this functionality." msgstr "" #: ../../:1465 msgid "" "VxFlex OS (ScaleIO) driver drops support for options, which were marked as " "deprecated in Pike release. Remove config options: " "``sio_protection_domain_id``, ``sio_protection_domain_name``, " "``sio_storage_pool_name``, ``sio_storage_pool_id``. Remove volume type " "options: ``sio:sp_name``, ``sio:sp_id``, ``sio:pd_name``, ``sio:pd_id``, " "``sio:provisioning_type``, ``sio:iops_limit``, ``sio:bandwidth_limit``." msgstr "" #: ../../:991 msgid "" "VxFlex OS driver now supports OpenStack volume replication v2.1 for VxFlex " "OS v3.5.0 storage backends." msgstr "" #: ../../:1101 msgid "" "VxFlex OS driver now supports VxFlex OS 3.0 features: storage pools with " "fine granularity layout, volume compression(SPEF)." msgstr "" #: ../../:983 msgid "VxFlex OS driver now supports VxFlex OS 3.5.x." msgstr "" #: ../../:996 msgid "" "VxFlex OS driver now supports storage-assisted revert volume to snapshot." msgstr "" #: ../../:987 msgid "VxFlex OS driver now supports storage-assisted volume migration." msgstr "" #: ../../:631 msgid "" "We can now limit the number of concurrent backup/restore operations that a " "Cinder backup service can perform using the ``backup_max_operations`` " "configuration option." msgstr "" #: ../../:28 stable/2023.2>:18 stable/2024.1>:271 msgid "" "We currently do a sparse copy when writing an image on the volume. This " "could be a potential data leak scenario where the zero blocks of the new " "image are not written on the existing volume and the data from the old image " "still exists on the volume. We fix the scenario by not doing sparse copy " "when reimaging the volume." msgstr "" #: ../../:406 stable/zed>:146 yoga-eom>:201 msgid "" "We introduced a new config parameter, ``reserved_image_namespaces``, that " "allows operators to set the image properties to filter out from volume image " "metadata by namespace when uploading a volume to Glance. These properties, " "if not filtered out, cause failures when uploading images back to Glance. " "The error will happen on Glance side when the reserved namespaces are used. " "This option is also useful when an operator wants to use the Glance property " "protections feature to make some image properties read-only." msgstr "" #: ../../:703 msgid "" "We recently became aware of the following anomalies, however, when using the " "current RBD driver with a Ceph storage backend." msgstr "" #: ../../:173 msgid "" "Welcome to the 2023.1 (Antelope) release of the OpenStack Block Storage " "service (cinder). With this release, we added several drivers and driver " "features as follows:" msgstr "" #: ../../:823 msgid "" "Welcome to the Ussuri release of the OpenStack Block Storage service " "(cinder). The cinder team would like to bring the following points to your " "attention. Details may be found below." msgstr "" #: ../../:581 msgid "" "Welcome to the Victoria release of the OpenStack Block Storage service " "(cinder). With this release, the Block Storage API version 3 has reached " "microversion **3.62**. The cinder team would like to bring the following " "points to your attention. Details may be found below." msgstr "" #: ../../:445 msgid "" "Welcome to the Wallaby release of the OpenStack Block Storage service " "(cinder). With this release, the Block Storage API version 3 has reached " "microversion **3.64**." msgstr "" #: ../../:413 msgid "" "Welcome to the Xena release of the OpenStack Block Storage service (cinder). " " With this release, the Block Storage API version 3 has reached microversion " "**3.66**. The cinder team would like to bring the following points to your " "attention. Details may be found below." msgstr "" #: ../../:468 msgid "" "Welcome to the Yoga release of the OpenStack Block Storage service (cinder). " " With this release, the Block Storage API version 3 has reached microversion " "**3.68**. The cinder team would like to bring the following points to your " "attention. Details may be found throughout this document." msgstr "" #: ../../:48 msgid "" "What QoS settings are available depends upon the storage firmware version of " "the ETERNUS AF/DX." msgstr "" #: ../../:651 msgid "" "When a policy value is deprecated, the oslo.policy engine will check the new " "value, and if that fails, it will evaluate the deprecated value. This " "behavior may be modified so *only* the new policy value is used by setting " "the configuration option ``enforce_new_defaults=True`` in the " "``[oslo_policy]`` section of the cinder configuration file." msgstr "" #: ../../:620 stable/ussuri>:658 #: victoria-eom>:1025 msgid "" "When a volume type is specified explicitly in a volume-create call, Cinder " "will use the specified type. If the specified type cannot be assigned due " "to a conflict with other parameters in the volume-create call, however, the " "call will result in a 400 (Bad Request) response." msgstr "" #: ../../:925 msgid "" "When an encrypted volume is cloned, a new encryption key is generated for " "the new volume. This is currently implemented only for iSCSI/FC backends." msgstr "" #: ../../:706 msgid "" "When creating an encrypted volume from an image in Glance that was created " "from a non-encrypted volume uploaded as an image, or an image that just " "happens to be sized very close to the gibibyte boundary given by the " "requested volume size, the space consumed by the encryption header may not " "leave sufficient space for the data contained in the image. In this case, " "the data is silently truncated to fit within the requested volume size." msgstr "" #: ../../:50 msgid "" "When disabled (which is the default and current behavior), a replicated " "source volume will be protected with a snapshot of the same volume type." msgstr "" #: ../../:54 msgid "" "When enabled, snapshots of replicated source volumes will be treated as " "regular, non-replicated devices." msgstr "" #: ../../:74 msgid "" "When extending a volume created on RaidGroup, the process has been updated " "to use CLI for volume extension." msgstr "" #: ../../:71 msgid "" "When extending a volume created on ThinProvisionPool, the process will still " "use SMI-S for volume extension." msgstr "" #: ../../:616 msgid "" "When the Ceph backup driver is used for the backup service, restoring a " "backup to a volume created on a non-RBD backend fails. The cinder team has " "developed a fix but decided to do more thorough testing before including it " "in a release. When ready, the solution is expected to be backported to a " "future release in the Yoga series. The issue is being tracked as `Bug " "#1895035 `_." msgstr "" #: ../../:710 msgid "" "When the Ceph backup driver is used for the backup service, restoring a " "backup to a volume created on a non-RBD backend fails. The cinder team is " "working on a solution which is expected to be backported to a future release " "in the Xena series. The issue is being tracked as `Bug #1895035 `_." msgstr "" #: ../../:62 msgid "" "When the storage firmware version is greater than V11L30-0000, the IOPS/" "Throughput of Total/Read/Write for the volume can be set separately using:" msgstr "" #: ../../:51 msgid "" "When the storage firmware version is less than V11L30-0000, only the upper " "limit of bandwidth(BWS) can be set using:" msgstr "" #: ../../:470 msgid "" "When transferring an encrypted volume, its snapshots must also be " "transferred. Attempts to transfer an encrypted volume without transferring " "its snapshots are disallowed." msgstr "" #: ../../:930 msgid "" "When uploading qcow2 images to Glance, image data will be compressed. This " "will generally result in less data transferred to Glance at the expense of " "higher CPU usage. This behavior is controlled by the " "\"image_compress_on_upload\" boolean option, which defaults to True." msgstr "" #: ../../:933 msgid "" "When using a PowerMax OS array as a replication target, where the source is " "an All-Flash/Hybrid array running HyperMax OS, service level and workload " "settings are not correctly applied for devices on the replication target if " "a workload is specified. Instead of setting only the workload to None, both " "service level and workload are set to None. This fix corrects the " "application of service level and workload settings for replication sessions " "where the source is HyperMax OS and the target is PowerMax OS." msgstr "" #: ../../:214 msgid "" "When using this option, users can specify the name format of host groups or " "iSCSI targets. Rules of the format:" msgstr "" #: ../../:566 msgid "" "While in your Train deployment, purge the cinder database. This will remove " "soft-deleted volumes and snapshots and allow you to upgrade to Ussuri in the " "regular way." msgstr "" #: ../../:755 msgid "" "While the driver has been tested against the first Release Candidate for the " "cinder Victoria release, be aware that it does not have ongoing third-party " "CI. If you choose to use the driver, the configuration option " "``enable_unsupported_driver`` must be set to ``True`` in the ``fc-zone-" "manager`` section in cinder.conf to allow its use in this release." msgstr "" #: ../../:1120 msgid "" "While you may expect that Cinder will be able to consume any image in " "``compressed`` container format *that Cinder has created*, you should not " "expect Cinder to be able to successfully use an image in ``compressed`` " "format that it has not created itself." msgstr "" #: ../../:691 msgid "" "With removal of the CoprHD Volume Driver any volumes being used by Cinder " "within a CoprHD backend should be migrated to a supported storage backend " "before upgrade." msgstr "" #: ../../:827 msgid "" "With this release, the Block Storage API version 3 has reached microversion " "**3.60**." msgstr "" #: ../../:42 msgid "Yadro Tatlin Unified: Added initial version of the FC driver." msgstr "" #: ../../:356 msgid "Yadro Tatlin Unified: Added initial version of the iSCSI driver." msgstr "" #: ../../:232 msgid "You can use each variable in the specified value no more than once." msgstr "" #: ../../:221 msgid "You can use the following variables:" msgstr "" #: ../../:475 stable/ussuri>:505 msgid "You upgraded to Train from Stein" msgstr "" #: ../../:507 msgid "" "Your original upgrade from Stein was to cinder version 15.3.0 or earlier" msgstr "" #: ../../:477 msgid "" "Your original upgrade from Stein was to cinder version 15.3.0 or earlier." msgstr "" #: ../../:918 msgid "" "Zadara VPSA Driver: Added new driver authentication method to use VPSA API " "access key, and deprecate exisiting authentication method that used username " "and password combination. The deprecated config inputs will be removed in " "the next official release after Train." msgstr "" #: ../../:473 msgid "" "Zadara VPSA Driver: Added support for cinder features volume manage, " "snapshot manage, list manageable volumes, manageable snapshots, multiattach " "and ipv6 support." msgstr "" #: ../../:36 msgid "" "[Pure Storage] 'bug #2028380 '_: Fixed issue with cinder replication failover failing due to " "incorrect REST call." msgstr "" #: ../../:84 msgid "" "[Pure Storage] Corrected support status to True for generic group " "consistency snapshot support and added support for replication-enabled " "consistency groups." msgstr "" #: ../../:349 msgid "" "[Pure Storage] `Bug #2035404 `_: Fixed issue with missing replication pod causing driver to fail " "on restart." msgstr "" #: ../../:393 msgid "" "[Pure Storage] ``user_agent`` string changed from reporting kernel version " "to operating system distro and version." msgstr "" #: ../../:291 msgid "" "[Pure Storage] `bug #2028380 `_: Fixed issue with cinder replication failover failing due to " "incorrect REST call." msgstr "" #: ../../:568 msgid "" "[`Community Goal `_] Support has been added for developers to write pre-upgrade " "checks. Operators can run these checks using ``cinder-status upgrade check``." " This allows operators to be more confident when upgrading their deployments " "by having a tool that automates programmable checks against the deployment " "configuration or dataset." msgstr "" #: ../../:464 msgid "" "`Bug #1432387 `_: Add a " "command to cinder-manage to clean up file locks existing in hosts where " "there is a Cinder service running (API, Scheduler, Volume, Backup). Command " "works with the Cinder services running, useful to be called as a cron job, " "as well as stopped, to be called on host startup. Command invocation " "``cinder-manage util clean_locks`` with optional parameter ``--services-" "offline``." msgstr "" #: ../../:1048 msgid "" "`Bug #1432387 `_: Try to " "automatically clean up file locks after a resource (volume, snapshot) is " "deleted. This will alleviate the issue of the locks directory always " "increasing the number of files." msgstr "" #: ../../:1207 xena-eom>:1189 msgid "" "`Bug #1484343 `_: Fix " "creation of duplicated quota usage entries in DB." msgstr "" #: ../../:1083 msgid "" "`Bug #1697422 `_: Fix HPE " "3PAR driver issue where volumes that were live migrated to it would end up " "being inaccessible. We would no longer be able to use the volume for any " "operation, such as attach, detach, delete, snapshot, etc." msgstr "" #: ../../:1201 xena-eom>:1183 msgid "" "`Bug #1697906 `_: Fix " "``until_refresh`` configuration changes not taking effect in a timely " "fashion or at all." msgstr "" #: ../../:1108 msgid "" "`Bug #1740950 `_: the " "``host_name`` field in any object in the ``attachments`` array of the volume " "detail response is populated only when the call is made in an administrative " "context. Otherwise, its value is the JSON ``null`` value." msgstr "" #: ../../:785 msgid "" "`Bug #1823200 `_: This " "release contains an updated Dell EMC VxFlex OS driver. It must be used with " "``os-brick`` >= 2.10.3 but < 2.11.0. and requires that a new configuration " "file be deployed on compute nodes, cinder nodes, and anywhere you would " "perform a volume attachment in your deployment. See the `Dell EMC VxFlex OS " "(ScaleIO) Storage driver `_ " "documentation for details about the configuration file, and see `OSSN-0086 " "`_ for more information " "about the security vulnerability." msgstr "" #: ../../:278 msgid "" "`Bug #1823200 `_: This " "release contains an updated Dell EMC VxFlex OS driver. It must be used with " "``os-brick`` >= 2.8.5 but < 2.9.0. and requires that a new configuration " "file be deployed on compute nodes, cinder nodes, and anywhere you would " "perform a volume attachment in your deployment. See the `Dell EMC VxFlex OS " "(ScaleIO) Storage driver `_ " "documentation for details about the configuration file, and see `OSSN-0086 " "`_ for more information " "about the security vulnerability." msgstr "" #: ../../:784 msgid "" "`Bug #1823200 `_: This " "release contains an updated Dell EMC VxFlex OS driver. It must be used with " "``os-brick`` >= 3.0.2 but < 3.1.0. and requires that a new configuration " "file be deployed on compute nodes, cinder nodes, and anywhere you would " "perform a volume attachment in your deployment. See the `Dell EMC VxFlex OS " "(ScaleIO) Storage driver `_ " "documentation for details about the configuration file, and see `OSSN-0086 " "`_ for more information " "about the security vulnerability." msgstr "" #: ../../:947 msgid "" "`Bug #1823200 `_: This " "release contains an updated Dell EMC VxFlex OS driver. It must be used with " "``os-brick`` version 3.1.0 or greater and requires that a new configuration " "file be deployed on compute nodes, cinder nodes, and anywhere you would " "perform a volume attachment in your deployment. See the `Dell EMC VxFlex OS " "(ScaleIO) Storage driver `_ " "documentation for details about the configuration file, and see `OSSN-0086 " "`_ for more information " "about the security vulnerability." msgstr "" #: ../../:960 msgid "" "`Bug #1828386 `_: Fix the " "bug that a volume retyped from another volume type to a replicated or " "multiattach type cannot have replication or multiattach enabled in rbd " "driver." msgstr "" #: ../../:854 msgid "" "`Bug #1837524 `_: IBM " "Spectrum Virtualize Family: Fixed create_consistency_group if the volume " "has mirror copy and mdisk_grp_name=many." msgstr "" #: ../../:1151 msgid "" "`Bug #1839384 `_: NetApp " "ONTAP: Detaching any instance from multiattached volume terminates " "connection. Now the connection is terminated only if there're no other " "instances using the same initiator." msgstr "" #: ../../:1090 msgid "" "`Bug #1858119 `_: Fix the " "HPE 3PAR driver's attempt to rename the backend volume after it was migrated." " If the original volume resides on the same 3PAR backend then the pre and " "post migration volume names are swapped. Otherwise, the newly migrated " "volume is renamed to match the original name." msgstr "" #: ../../:968 msgid "" "`Bug #1859652 `_: Fix to " "allow retyping an attached volume to SolidFire." msgstr "" #: ../../:1215 msgid "" "`Bug #1863021 `_: Eventlet " "monkey patch results in assert len(_active) == 1 AssertionError" msgstr "" #: ../../:282 msgid "" "`Bug #1863806 `_: ``os-" "reset_status`` notifications for volumes, snapshots, and backups were being " "sent to nonstandard publisher_ids relative to other cinder notifications for " "volumes, snapshots, and backups. Now they are also sent to the following " "*standard* publisher_ids, where most people would expect to find them:" msgstr "" #: ../../:940 msgid "" "`Bug #1866860 `_: Fix " "`AttributeError` on the Brocade ZM driver when using setting REST_HTTP or " "REST_HTTPS as the fc_southbound_protocol option and an exception is raised " "by the client." msgstr "" #: ../../:1197 msgid "" "`Bug #1867906 `_: group-" "create-from-src doesn't work in active/active mode" msgstr "" #: ../../:973 msgid "" "`Bug #1869746 `_: Cinder no " "longer allows an incremental backup to be created while having the parent " "backup in another project." msgstr "" #: ../../:1070 wallaby-eom>:1072 msgid "" "`Bug #1870367 `_ : Partially " "fixed NFS and Quobyte drivers by no longer allowing extending a volume while " "it is attached, to prevent failures due to Qemu internal locking mechanisms." msgstr "" #: ../../:1227 msgid "" "`Bug #1871744 `_: Glance " "retry failed: TypeError: get() got an unexpected keyword argument " "'schema_name'" msgstr "" #: ../../:1230 msgid "" "`Bug #1873463 `_: Virtuozzo " "driver - copy_volume_to_image() needs to support glance multistore" msgstr "" #: ../../:169 stable/train>:648 stable/ussuri>:687 #: victoria-eom>:1077 msgid "" "`Bug #1873738 `_: RBD Driver:" " Added cleanup for residue destination file if the copy image to encrypted " "volume operation fails." msgstr "" #: ../../:980 msgid "" "`Bug #1874134 `_: Fix for " "NetApp ONTAP driver allowing an iSCSI or FCP volume to be extended to a size " "up to 16TB regardless of its original size, even if it's attached to an " "instance." msgstr "" #: ../../:1203 msgid "" "`Bug #1874187 `_: PowerMax " "driver - Exception was not handled and breaks the flow while add/remove " "volumes to generic volume group" msgstr "" #: ../../:987 msgid "" "`Bug #1874541 `_: Fix a " "ZeroDivisionError when the SolidFire driver tried to update cluster " "capabilities." msgstr "" #: ../../:1224 msgid "" "`Bug #1875432 `_: PowerMax " "Driver - Live migration fails when an instance has more than one replication " "device" msgstr "" #: ../../:1222 msgid "" "`Bug #1875433 `_: PowerMax " "Driver - Retype from rep to rep leaving storage group suspended" msgstr "" #: ../../:1158 msgid "" "`Bug #1875478 `_: PowerMax " "Driver - Concurrent live migrations can sometimes fail when one thread " "deletes a storage group that another thread may need." msgstr "" #: ../../:163 stable/train>:588 stable/ussuri>:798 #: victoria-eom>:993 msgid "" "`Bug #1875570 `_: Fixed " "issue with NFS backend where the image-volume cache was never used to create " "a volume, even when the cache was enabled." msgstr "" #: ../../:1217 msgid "" "`Bug #1875640 `_: PowerMax " "Driver - Failover lock not released during U4P failover during exception" msgstr "" #: ../../:1213 msgid "" "`Bug #1875953 `_: Virtuozzo " "driver - missing context in create_cloned_volume call" msgstr "" #: ../../:734 msgid "" "`Bug #1875959 `_: Fixed " "issue where NetApp ONTAP NFS driver would fail to flexclone a Glance image." msgstr "" #: ../../:1220 msgid "" "`Bug #1875959 `_: NetApp " "ONTAP NFS driver - Unable to perform flexclone from glance share" msgstr "" #: ../../:1179 xena-eom>:1150 msgid "" "`Bug #1877164 `_: Fix " "retyping volume with snapshots leaves the snapshots with the old type, " "making the quotas wrong inmediately for snapshots, and breaking them even " "more after those snapshots are deleted." msgstr "" #: ../../:1210 msgid "" "`Bug #1877445 `_: Pure " "Storage Driver - doesn't handle synchronous replication CIDR filters " "properly" msgstr "" #: ../../:1208 msgid "" "`Bug #1877976 `_: PowerMax " "Driver - RDFG suspended on vol create exception" msgstr "" #: ../../:594 stable/ussuri>:632 victoria-eom>:999 msgid "" "`Bug #1879578 `_: A " "regression in the Train release caused Cinder to assign the default volume " "type too aggressively when a volume type was not specified in a volume-" "create request. As a result, some alternative methods of specifying the " "volume type were ignored and the default type (either configured by the " "operator or the system default) would be assigned." msgstr "" #: ../../:1123 msgid "" "`Bug #1880971 `_: Fix " "leaving mapped volumes on offline volume migration and revert to snapshot " "operations failure." msgstr "" #: ../../:277 stable/ussuri>:405 #: victoria-eom>:1129 msgid "" "`Bug #1883490 `_: Fixed " "incorrect response of listing volumes with filters." msgstr "" #: ../../:396 stable/ussuri>:707 #: victoria-eom>:1139 msgid "" "`Bug #1884268 `_: Fixed " "issue where non-admin users could not show a volume transfer by name." msgstr "" #: ../../:1116 msgid "" "`Bug #1886042 `_: Fix " "``unique_fqdn_network`` configuration option for the Kaminario driver, as it " "was being ignored when defined in the driver section, which used to work." msgstr "" #: ../../:289 xena-eom>:1200 msgid "" "`Bug #1886543 `_: On retypes " "requiring a migration, try to use the driver assisted mechanism when moving " "from one backend to another when we know it's safe from the volume type " "perspective." msgstr "" #: ../../:540 stable/ussuri>:590 victoria-eom>:920 msgid "" "`Bug #1886632 `_: The system " "defined ``__DEFAULT__`` volume type is now treated as a regular volume-type " "and may be updated or deleted. Since the configured ``default_volume_type`` " "cannot be deleted, however, the ``__DEFAULT__`` volume type may not be " "deleted if it is the value of that configuration option." msgstr "" #: ../../:1199 msgid "" "`Bug #1886662 `_: PowerMax " "Driver - Volumes not cleaned up after exception during migrate, retype, srdf " "protect creates/deletes blocks subsequent operations" msgstr "" #: ../../:1206 msgid "" "`Bug #1886689 `_: Rekey " "fails when provider is legacy provider class" msgstr "" #: ../../:873 msgid "" "`Bug #1887859 `_: Fix for a " "race in Cinder Backup Manager with double initialization of backup driver." msgstr "" #: ../../:371 stable/ussuri>:364 #: victoria-eom>:1032 msgid "" "`Bug #1887885 `_: In NEC " "driver, fix a snapshot detach error." msgstr "" #: ../../:376 stable/ussuri>:665 #: victoria-eom>:1037 msgid "" "`Bug #1887908 `_： In NEC " "driver, fix live-migration failure with FC." msgstr "" #: ../../:369 victoria-eom>:527 wallaby-eom>:879 msgid "" "`Bug #1887962 `_: PowerMax " "driver fix to rectify incorrectly deleted non-temporary snapshots when " "calling do_sync_check used in multiple operations due to missing check for " "temporary snapshot name." msgstr "" #: ../../:935 msgid "" "`Bug #1888548 `_: Add Python " "3 support to the Brocade Zone Manager driver." msgstr "" #: ../../:929 msgid "" "`Bug #1888550 `_: Fix " "`UnboundLocalError` on the Brocade lookup driver on southbound client " "creation failure during the device mapping retrieval." msgstr "" #: ../../:1194 msgid "" "`Bug #1888831 `_: PowerMax " "Driver - Volume updates for volumes in groups not performed during failover" msgstr "" #: ../../:254 stable/ussuri>:272 victoria-eom>:452 #: wallaby-eom>:886 msgid "" "`Bug #1888951 `_: Fixed an " "issue with creating a backup from snapshot with NFS volume driver." msgstr "" #: ../../:1172 msgid "" "`Bug #1889758 `_: Fix revert " "to snapshot not working for non admin users when using the snapshot's name." msgstr "" #: ../../:1042 msgid "" "`Bug #1890241 `_: During " "delete_group_snapshot on IBM storwize, in case of multiple snapshots in the " "group, delete flow exits if any one snapshot deletion fails, but it should " "update error state and continue with deleting other snapshots." msgstr "" #: ../../:1050 msgid "" "`Bug #1890586 `_: IBM " "Storwize: Fixed issues in check_flashcopy_rate that impacts the performance " "during Group Snapshot/Clone operations for bulk volumes." msgstr "" #: ../../:1057 msgid "" "`Bug #1890588 `_: IBM " "Storwize: Fixed issues in select_io_group that impacts the performance " "during Create_volume, Group Snapshot/Clone operations for bulk non-hyperswap " "volumes." msgstr "" #: ../../:900 msgid "" "`Bug #1890589 `_: IBM " "Spectrum Virtualize Family: Fixed issues in create_flashcopy_to_consistgrp, " "made use of iogrp,qos from opts for create_vdisk, mkfcmap calls if the data " "exists in opts." msgstr "" #: ../../:155 stable/ussuri>:286 victoria-eom>:466 #: wallaby-eom>:907 msgid "" "`Bug #1890591 `_: IBM " "Spectrum Virtualize Family: Fixed issue in do_setup of " "StorwizeSVCCommonDriver to save pool information in stats during " "initialisation." msgstr "" #: ../../:1233 msgid "" "`Bug #1892057 `_: PowerMax " "Driver - Missing force flag for rep group volume adds" msgstr "" #: ../../:1235 msgid "" "`Bug #1892718 `_: PowerMax " "Driver - SRDF suspend can fail during _create_replica" msgstr "" #: ../../:627 msgid "" "`Bug #1893107 `_: The Ussuri " "release changes the cinder database schema to make the ``volume_type_id`` " "column in the ``volumes`` and ``snapshots`` tables non-nullable because all " "volumes have been required to have a volume type since the Train release. " "The online database migration in the cinder Train series (release 15.3.0 or " "earlier), however, did not process soft-deleted rows, leaving the " "possibility that there could be a deleted volume or snapshot with a null " "``volume_type_id``, which in turn will make the database upgrade fail when " "the non-nullability constraint cannot be applied when a Train installation " "is upgraded to Ussuri." msgstr "" #: ../../:670 msgid "" "`Bug #1893107 `_: The Ussuri " "release changes the cinder database schema to make the ``volume_type_id`` " "column in the ``volumes`` and ``snapshots`` tables non-nullable because all " "volumes have been required to have a volume type since the Train release. " "The online migration in cinder release 15.3.0 or earlier, however, did not " "process soft-deleted rows, leaving the possibility that there could be a " "deleted volume or snapshot with a null ``volume_type_id``, which in turn " "would make the database upgrade fail in Ussuri when the non-nullability " "constraint could not be applied." msgstr "" #: ../../:1164 msgid "" "`Bug #1894086 `_: PowerMax " "Cinder driver addresses an issue whereby Unisphere REST iterators expire " "before all data can be read from them. The iterator expiration is now set to " "180mins and deleted once all data has been read so no artifacts are left " "behind." msgstr "" #: ../../:921 msgid "" "`Bug #1894381 `_: Fix the " "bug that cinder-manage cluster remove does not work and an error " "NoSuchOptError occurs." msgstr "" #: ../../:376 victoria-eom>:534 wallaby-eom>:927 msgid "" "`Bug #1895510 `_: IBM DS8K: " "Fixed compatability issue when using the IBM DS8K driver with storage " "version R9 and later." msgstr "" #: ../../:1064 msgid "" "`Bug #1896087 `_: Volume " "status will be rolled back to the previous state if backup creation fails " "when backup service is not available" msgstr "" #: ../../:393 wallaby-eom>:422 xena-eom>:1207 msgid "" "`Bug #1898075 `_: When " "Glance added support for multiple cinder stores, Images API version 2.11 " "modified the format of the image location URI, which Cinder reads in order " "to try to use an optimized data path when creating a volume from an image. " "Unfortunately, Cinder did not understand the new format and when Glance " "multiple cinder stores were used, Cinder could not use the optimized data " "path, and instead downloaded image data from the Image service. Cinder now " "supports Images API version 2.11." msgstr "" #: ../../:295 stable/ussuri>:309 victoria-eom>:563 #: wallaby-eom>:1212 msgid "" "`Bug #1898587 `_: Address " "cloning and api request timeout issues users may hit in certain " "environments, by allowing configuring timeout values for these operations " "through cinder configuration file." msgstr "" #: ../../:473 wallaby-eom>:956 msgid "" "`Bug #1900979 `_: Fix bug " "with using PowerStore with enabled CHAP as a storage backend." msgstr "" #: ../../:735 msgid "" "`Bug #1901188 `_: Fix " "unnecessary migration on retype when QoS has the same elements in both types." "" msgstr "" #: ../../:1096 msgid "" "`Bug #1902852 `_: Fixed throwing Python traceback message when using ``cinder-" "manage `` without an action for the category." msgstr "" #: ../../:388 stable/ussuri>:397 victoria-eom>:555 #: wallaby-eom>:980 msgid "" "`Bug #1904440 `_: When an " "iSCSI/FC encrypted volume was cloned, the rekey operation would stamp the " "wrong encryption key on the newly cloned volume. This resulted in a volume " "that could not be attached. It does not present a security problem." msgstr "" #: ../../:167 stable/ussuri>:194 victoria-eom>:277 #: wallaby-eom>:988 msgid "" "`Bug #1904892 `_: Fix cinder " "manage operations for NFS backends using IPv6 addresses in the NFS server " "address. These were previously rejected by the Cinder API." msgstr "" #: ../../:1009 msgid "" "`Bug #1906528 `_: IBM " "Spectrum Virtualize Family driver: Fixed issue regarding host-failback and " "group-failback which impacts storage back-end performance." msgstr "" #: ../../:64 stable/train>:268 stable/ussuri>:293 #: victoria-eom>:478 wallaby-eom>:1027 msgid "" "`Bug #1908315 `_: Corrected " "the default checkstring for the ``group:reset_group_snapshot_status`` policy " "to make it admin-only. This policy governs the Block Storage API action " "`Reset group snapshot status `_, which by default is supposed to " "be an adminstrator-only action." msgstr "" #: ../../:472 yoga-eom>:218 msgid "" "`Bug #1910767 `_: Fixed the " "calculation of the allocated capacity for the volume manager. The fix takes " "into account all volumes that have a host setting, not just volumes with a " "status of 'in-use' or 'available'." msgstr "" #: ../../:1036 msgid "" "`Bug #1912451 `_: IBM " "Spectrum Virtualize Family driver: Updated replication properties for " "HyperSwap volumes and volumes with replication enabled that were missing " "from volume metadata." msgstr "" #: ../../:192 msgid "" "`Bug #1912624 `_: Corrected " "regression introduced by the refactoring of the backup service in the ussuri " "release, which prevented the creation of a volume backup in a different " "availability zone." msgstr "" #: ../../:1090 xena-eom>:1042 msgid "" "`Bug #1913054 `_: Fix for " "creating a clone of an encrypted volume for drivers that require additional " "information to attach." msgstr "" #: ../../:162 stable/ussuri>:189 victoria-eom>:272 #: wallaby-eom>:961 msgid "" "`Bug #1915800 `_: Add " "support for ports filtering in XtremIO driver." msgstr "" #: ../../:181 wallaby-eom>:244 xena-eom>:352 #: yoga-eom>:868 msgid "" "`Bug #1916980 `_: Fixed " "stale volume notification information on volume detach." msgstr "" #: ../../:1186 msgid "" "`Bug #1917450 `_: Fix " "automatic quota refresh to correctly account for migrating volumes. During " "volume migration we'll have 2 volumes in cinder and only one will be " "accounted for in quota usage." msgstr "" #: ../../:1103 xena-eom>:1070 msgid "" "`Bug #1917574 `_: Fixed " "issue when cinderclient requests to show volume by name for non-admin users " "would result in the volume not being found for microversions 3.31 or later." msgstr "" #: ../../:1129 msgid "" "`Bug #1917797 `_: Fix " "Cinder's communication with the Glance API to correctly load mTLS " "certificates from config (``glance_certfile`` and ``glance_keyfile`` in the " "``[DEFAULT]`` section)." msgstr "" #: ../../:763 msgid "" "`Bug #1918889 `_: Add " "support for iSCSI IPv6 in XtremIO driver." msgstr "" #: ../../:1193 xena-eom>:1157 msgid "" "`Bug #1919161 `_: Fix " "automatic quota refresh to correctly account for temporary volumes. During " "some cinder operations, such as create a backup from a snapshot, temporary " "volumes are created and are not counted towards quota usage, but the sync " "mechanism was counting them, thus incorrectly updating volume usage." msgstr "" #: ../../:185 stable/ussuri>:212 victoria-eom>:308 #: wallaby-eom>:1056 msgid "" "`Bug #1920237 `_: The backup " "manager calls volume remove_export() but does not wait for it to complete " "when detaching a volume after backup. This caused problems when a " "subsequent operation started on that volume before it had fully detached." msgstr "" #: ../../:1219 msgid "" "`Bug #1922920 `_: Don't do " "volume usage notifications for migration temporary volumes." msgstr "" #: ../../:1165 msgid "" "`Bug #1923828 `_: Fixed " "quota usage sync counting temporary snapshots from backups and revert to " "snapshot." msgstr "" #: ../../:1171 msgid "" "`Bug #1923829 `_: Fixed " "manually deleting temporary snapshots from backups and revert to snapshots " "after failure leads to incorrect quota usage." msgstr "" #: ../../:1177 msgid "" "`Bug #1923830 `_: Fixed " "successfully backing up an in-use volume using a temporary snapshot instead " "of a clone leads to incorrect quota usage." msgstr "" #: ../../:123 wallaby-eom>:261 xena-eom>:369 #: yoga-eom>:906 msgid "" "`Bug #1924643 `_: Fixed the " "NetApp cinder driver sub-clone operation that might be used by extend " "operation in case the extended size is greater than the max LUN geometry." msgstr "" #: ../../:545 yoga-eom>:421 msgid "" "`Bug #1929223 `_: Fixed " "HTTPS certificate validation was disabled in PowerFlex connector." msgstr "" #: ../../:130 stable/ussuri>:141 victoria-eom>:387 #: wallaby-eom>:416 xena-eom>:1194 msgid "" "`Bug #1931004 `_: Fixed use " "of incorrect stripe unit in RBD image clone causing volume-from-image to " "fail when using raw images backed by Ceph." msgstr "" #: ../../:186 wallaby-eom>:249 xena-eom>:357 #: yoga-eom>:873 msgid "" "`Bug #1935011 `_: Fixed " "missing detach.start notification when deleting an attachment in reserved " "state." msgstr "" #: ../../:213 wallaby-eom>:283 xena-eom>:396 #: yoga-eom>:957 msgid "" "`Bug #1935057 `_: Fixed " "sometimes on a detach volume may end in available and detached yet have an " "attachment in error_detaching." msgstr "" #: ../../:66 stable/ussuri>:78 victoria-eom>:152 #: wallaby-eom>:192 xena-eom>:314 yoga-eom>:768 msgid "" "`Bug #1935688 `_: Cinder " "only supports uploading a volume of an encrypted volume type as an image to " "the Image service in ``raw`` format using a ``bare`` container type. " "Previously, ``os-volume_upload_image`` action requests to the Block Storage " "API specifying different format option values were accepted, but would " "result in a later failure. This condition is now checked at the API layer, " "and ``os-volume_upload_image`` action requests on a volume of an encrypted " "type that specify unsupported values for ``disk_format`` or " "``container_format`` now result in a 400 (Bad Request) response." msgstr "" #: ../../:192 wallaby-eom>:255 xena-eom>:363 #: yoga-eom>:879 msgid "" "`Bug #1937084 `_: Fixed race " "condition between delete attachment and delete volume that can leave deleted " "volumes stuck as attached to instances." msgstr "" #: ../../:83 current msgid "" "`Bug #1938488 `_: When " "cleaning up a failed backup, clean up the snapshot status when the backup " "source is a snapshot" msgstr "" #: ../../:206 wallaby-eom>:276 xena-eom>:1077 msgid "" "`Bug #1941068 `_: Fixed type " "of the ``host`` configuration option. It was limited to valid FQDN values " "when we document that it isn't. This may result in the ``cinder-manage db " "sync`` command failing." msgstr "" #: ../../:568 wallaby-eom>:125 xena-eom>:277 #: yoga-eom>:808 msgid "" "`Bug #1944577 `_: Managing a " "volume to an encrypted type was never a good idea because there was no way " "to specify an encryption key ID so that the volume could be used. Requests " "to manage a volume to an encrypted volume type now result in an invalid " "request response." msgstr "" #: ../../:584 stable/zed>:178 yoga-eom>:225 msgid "" "`Bug #1945500 `_: Fixed an " "error when uploading to Glance a previously downloaded glance image when " "glance multistore is enabled. Glance reserves image properties in the " "namespace 'os_glance' for its own use and will not allow images to be " "created with these properties. Additionally, there are image properties, " "such as those associated with image signature verification, that are stored " "in a volume's image metadata, which should not be added to a new image when " "a volume is being uploaded as an image. Thus Cinder will no longer include " "any volume image metadata in the namespaces ``os_glance`` and " "``img_signature`` when it creates an image in Glance. Furthermore, because " "the Glance property protections feature allows an operator to configure " "specific image properties as read-only, this fix adds a configuration " "option, ``reserved_image_namespaces``, that allows an operator to exclude " "additional image properties by namespace (the ``os_glance`` and " "``img_signature`` namespaces are *always* excluded)." msgstr "" #: ../../:61 stable/2023.2>:229 stable/zed>:35 #: yoga-eom>:60 msgid "" "`Bug #1945500 `_: The " "original attempt at fixing this bug did not account for differences in how " "glance and cinder store image metadata, and as a result some image " "properties were not filtered out. This new improved fix addresses those " "differences and makes the filtering more thorough." msgstr "" #: ../../:225 xena-eom>:341 yoga-eom>:857 msgid "" "`Bug #1947123 `_: Fixed the " "volume creation issue in GPFS NFS driver when gpfs_images_share_mode is set " "to copy_on_write." msgstr "" #: ../../:219 xena-eom>:335 yoga-eom>:851 msgid "" "`Bug #1947134 `_: Fixed the " "initialization of GPFS NFS driver when gpfs_images_share_mode is set to " "copy_on_write by correcting _same_filesystem functionality." msgstr "" #: ../../:285 msgid "" "`Bug #1948962 `_: Fixed " "operations that failed on volume types with 255 characters names (e.g. set " "quota limits or volume migrate)." msgstr "" #: ../../:198 wallaby-eom>:268 msgid "" "`Bug #1950474 `_: Fixed " "policy authorization for transfer accept API. Previously, if an operator had " "overridden the default transfer accept policy to something project specific " "in policy.yaml file, it would break the transfer accept API which is fixed " "in this release." msgstr "" #: ../../:376 yoga-eom>:913 msgid "" "`Bug #1950474 `_: Fixed " "policy authorization for transfer accept API. Previously, setting " "``enforce_new_defaults=True`` in oslo_policy section would break the " "transfer accept API which is fixed in this release." msgstr "" #: ../../:797 msgid "" "`Bug #1951977 `_: Fixed " "backup create and restore not using multipath configuration when attaching " "the volume." msgstr "" #: ../../:791 msgid "" "`Bug #1951982 `_: Fixed " "cloning of encrypted volumes not using multipathing to change the encryption " "key used on the new volume." msgstr "" #: ../../:361 msgid "" "`Bug #1952420 `_: Fixed " "quota warnings about ``backups`` and ``backup_gigabytes`` when creating " "backups." msgstr "" #: ../../:578 msgid "" "`Bug #1952443 `_: Improve " "performance for creating volume from image, listing volumes, snapshots, " "backups, groups, and group_snapshots." msgstr "" #: ../../:479 msgid "" "`Bug #1952805 `_: Fixed the " "cinder-backup posix driver's behavior with multiple backup hosts. Previously " "cinder-backup would frequently schedule incremental backups on the wrong " "host and immediately fail." msgstr "" #: ../../:66 xena-eom>:104 yoga-eom>:839 msgid "" "`Bug #1953168 `_: Fixed " "missing parameter in the capacity filter log message." msgstr "" #: ../../:885 msgid "" "`Bug #1960019 `_: Fixed " "value of the x-openstack-request-id header when Cinder is using noauth." msgstr "" #: ../../:890 msgid "" "`Bug #1960020 `_: Fixed " "duplicated request-id values in logs for different requests, happens only on " "request to / to get available api versions." msgstr "" #: ../../:896 msgid "" "`Bug #1960021 `_: Fixed " "missing request id headers in requests to / to get available api versions." msgstr "" #: ../../:901 msgid "" "`Bug #1960329 `_: Fixed " "wrong request ID on middleware filters." msgstr "" #: ../../:94 stable/ussuri>:90 stable/zed>:618 #: victoria-eom>:66 wallaby-eom>:133 xena-eom>:285 yoga-eom>:426 msgid "" "`Bug #1965847 `_: Fixed " "issue where importing a backup record for a backup_id that currently existed " "had the unfortunate side effect of deleting the existing backup record." msgstr "" #: ../../:574 msgid "`Bug #1965952 `_:" msgstr "" #: ../../:729 msgid "" "`Bug #1966103 `_: Fixed " "inconsistent behavior of ``storage_protocol`` among different backends that " "report variants of the protocol name, such as FC, fc, fibre_channel." msgstr "" #: ../../:640 msgid "" "`Bug #1968170 `_: Fixed the " "message created when nova fails to reimage the volume." msgstr "" #: ../../:704 msgid "" "`Bug #1969366 `_: Fixed " "reporting of cacheable capability by drivers." msgstr "" #: ../../:367 msgid "" "`Bug #1969643 `_: The RBD " "driver can now delete volumes with other volumes cloned from it (or its " "snapshots) in cases where deletion would previously fail. This uses the RBD " "trash functionality." msgstr "" #: ../../:645 wallaby-eom>:140 xena-eom>:292 #: yoga-eom>:441 msgid "" "`Bug #1970768 `_: Fixed " "status of temporary volumes when creating backups and reverting to a " "snapshot, preventing accidental manual deletion of those resources." msgstr "" #: ../../:501 msgid "" "`Bug #1978020 `_: Fixed " "uploading a volume to a Cinder-backed Glance image; if a store name is set " "in the volume type's extra specs, it must also be sent to Glance as part of " "the new image location URI. Please note that while the `image_service:" "store_id` extra spec is validated when it is set for the volume type, it is " "not validated later; it is the operator's responsibility to make sure that " "the Glance store is not renamed or removed or that the volume types are " "updated accordingly." msgstr "" #: ../../:658 yoga-eom>:333 msgid "" "`Bug #1978729 `_: Fixed " "context.message_action is None on errors by backup drivers. The message_* " "properties of the context were not passed during rpc, which caused a double " "exception when a backup driver raised an exception, masking the actual " "backup driver exception." msgstr "" #: ../../:696 msgid "" "`Bug #1979666 `_: PowerMax " "driver : Fixed rare case where the SRP in the local and remote arrays are " "different when managing volumes into OpenStack. For backward compatibility " "and name matching, the default storage group will assume the SRP name of the " "local array on both arrays." msgstr "" #: ../../:528 yoga-eom>:35 msgid "" "`Bug #1980268 `_: When " "creating a volume from an image, a check has been added to compare the " "requested volume size to the image's ``virtual_size`` property and fail the " "request if the volume will be too small to contain the image. If the image " "record does not contain this property, the request is accepted but the " "volume will go to ``error`` status if the image does not fit (which is the " "current behavior)." msgstr "" #: ../../:328 msgid "" "`Bug #1988942 `_: Increased " "size of volume image metadata values accepted by the Block Storage API. " "Volume image metadata values were limited to 255 characters but Glance " "allows up to 65535 bytes. This change does not affect the database tables " "which already allow up to 65535 bytes for image metadata values." msgstr "" #: ../../:467 stable/zed>:14 msgid "" "`Bug #1996049 `_: Fixed bug " "where backup was not set to error on failure when volume did not exist." msgstr "" #: ../../:557 stable/train>:101 stable/ussuri>:97 #: stable/zed>:287 victoria-eom>:73 wallaby-eom>:78 xena-eom>:219 yoga-eom>:348 msgid "" "`Bug #1996188 `_: Fixed " "issue where a VMDK image file whose createType allowed named extents could " "expose host information. This change introduces a new configuration option, " "``vmdk_allowed_types``, that specifies the list of VMDK image subformats " "that Cinder will allow. The default setting allows only the " "'streamOptimized' and 'monolithicSparse' subformats." msgstr "" #: ../../:74 stable/2023.2>:305 msgid "" "`Bug #1997980 `_: RBD: Fixed " "failure to update rbd image features for multi-attach when features = 0." msgstr "" #: ../../:154 stable/2023.2>:311 xena-eom>:85 #: yoga-eom>:159 msgid "" "`Bug #2004555 `_: Fixed " "issue where a user manually deleting an attachment, calling terminate " "connection, detach, or force detach, for a volume that is still used by a " "nova instance resulted in leftover devices on the compute node. These " "operations will now fail when it is believed to be a problem." msgstr "" #: ../../:116 msgid "" "`Bug #2004555 `_: Fixed " "issue where a user manually deleting an attachment, calling terminate " "connection, detach, or force detach, for a volume that is still used by a " "nova instance resulted in leftover devices on the compute node. These " "operations will now fail." msgstr "" #: ../../:460 stable/2023.2>:172 msgid "" "`Bug #2007615 `_: the " "restore operation of the Cinder backup service now restores into sparse " "volumes, if possible. So, operators no longer need more space than used " "previously when they restore from a disaster." msgstr "" #: ../../:567 stable/zed>:172 yoga-eom>:54 msgid "" "`Bug #2008017 `_: Fixed " "NetApp NFS driver to never spawn a native thread avoid thread starvation and " "other related issues." msgstr "" #: ../../:187 msgid "" "`Bug #2008017 `_: Hide value " "of the `[coordination] backend_url` option from logs because it can contain " "credential." msgstr "" #: ../../:651 stable/2023.2>:319 stable/zed>:210 #: xena-eom>:128 yoga-eom>:243 msgid "" "`Bug #2008259 `_: Fixed the " "volume create functionality where non-admin users were able to create " "multiattach volumes by providing the `multiattach` parameter in the request " "body. Now we can only create multiattach volumes using a multiattach volume " "type, which is also the recommended way." msgstr "" #: ../../:193 msgid "" "`Bug #2016138 `_: Handle " "missing volumes during cleanup of incomplete backups." msgstr "" #: ../../:54 stable/2023.2>:179 msgid "" "`Bug #2025277 `_: Fixed a " "regression in the fix for Cinder backup restoring into sparse volumes, where " "OpenStack's integrated CLI triggered a traceback. The deprecated project-" "specific legacy CLI of Cinder continued to work." msgstr "" #: ../../:89 current msgid "" "`Bug #2031897 `_: Fixed " "issues for volume backups with the Ceph driver where failures of the first " "process (\"rbd export-diff\") were not caught. Instead, only the return code " "of the second process (\"rbd import-diff\") was recognized." msgstr "" #: ../../:279 msgid "" "`Bug #2036994 `_: Fixed " "rollback of volume status if the reimage operation fails while checking " "image metadata." msgstr "" #: ../../:24 stable/2023.2>:14 stable/2024.1>:267 msgid "" "`Bug #2045431 `_: Fixed a " "data leak scenario where we preserve sparseness when reimaging the volume." msgstr "" #: ../../:376 stable/train>:1696 msgid "" "`Bug 1809249 `_ - 3PAR " "driver adds the config option `hpe3par_target_nsp` that can be set to the " "3PAR backend to use when multipath is not enabled and the Fibre Channel Zone " "Manager is not used." msgstr "" #: ../../:302 victoria-eom>:487 wallaby-eom>:1049 msgid "" "`Bug 1913449 `_: Fix RBD " "driver _update_volume_stats() failing when using Ceph Pacific python rados " "libraries. This failed because we were passing a str instead of bytes to " "cluster.mon_command()" msgstr "" #: ../../:207 msgid "" "`Dell PowerMax Driver Bug #1981420 `_: Fixed issue faced while creating synchronous volume which was " "caused by incorrect handling of the force flag. This is corrected by " "checking volume type extra specs for the value of \"force_vol_edit\" " "parameter along with the \"force\" parameter." msgstr "" #: ../../:224 msgid "" "`FC driver only.` This is replaced with the smallest WWPN of the WWPNs of " "the connecting node." msgstr "" #: ../../:1249 msgid "" "`PowerMax Driver - Allowing for an empty group on a clone volume `_" msgstr "" #: ../../:1245 msgid "" "`PowerMax Driver - Force array and srp configuration `_" msgstr "" #: ../../:1243 msgid "" "`PowerMax Driver - Migrate extra spec class fix `_" msgstr "" #: ../../:1247 msgid "" "`PowerMax Driver - Prevent unmanage with snapvx `_" msgstr "" #: ../../:1251 msgid "" "`PowerMax Driver - RDF State Validation Enhancements `_" msgstr "" #: ../../:1253 msgid "" "`PowerMax Driver - Remove mandatory failover BID `_" msgstr "" #: ../../:138 stable/2024.1>:177 msgid "``Windows SMB Driver``" msgstr "" #: ../../:137 stable/2024.1>:176 msgid "``Windows iSCSI Driver``" msgstr "" #: ../../:1302 msgid "``backend_stats_polling_interval``" msgstr "" #: ../../:1299 msgid "``backup_driver_init_check_interval``" msgstr "" #: ../../:1300 msgid "``backup_driver_status_check_interval``" msgstr "" #: ../../:1288 msgid "" "``backup_driver_status_check_interval`` config option is renamed to " "``backup_driver_stats_polling_interval`` to be similar with volume drivers " "configuration. Old option name support will be dropped in U release." msgstr "" #: ../../:398 msgid "``backups_deleted_project_id_idx``" msgstr "" #: ../../:595 xena-eom>:603 msgid "``group:group_types:create``" msgstr "" #: ../../:597 xena-eom>:605 msgid "``group:group_types:delete``" msgstr "" #: ../../:596 xena-eom>:604 msgid "``group:group_types:update``" msgstr "" #: ../../:857 msgid "``group:group_types_manage``" msgstr "" #: ../../:593 msgid "``group:group_types_manage`` is replaced by:" msgstr "" #: ../../:602 msgid "``group:group_types_specs:get_all``" msgstr "" #: ../../:601 msgid "``group:group_types_specs:get``" msgstr "" #: ../../:858 msgid "``group:group_types_specs``" msgstr "" #: ../../:599 msgid "``group:group_types_specs`` is replaced by:" msgstr "" #: ../../:394 msgid "``group_snapshots_deleted_project_id_idx``" msgstr "" #: ../../:393 msgid "``groups_deleted_project_id_idx``" msgstr "" #: ../../:54 msgid "``maxBWS``" msgstr "" #: ../../:1467 msgid "" "``os-reset_status`` notifications for volumes, snapshots and backups will " "now go to the standard publisher id for volume, snapshot and backup like all " "other notifications for volume, snapshot and backup." msgstr "" #: ../../:66 msgid "``read_bytes_sec``" msgstr "" #: ../../:69 msgid "``read_iops_sec``" msgstr "" #: ../../:584 xena-eom>:843 msgid "``rule:admin_or_owner``" msgstr "" #: ../../:585 xena-eom>:844 msgid "``rule:system_or_domain_or_project_admin``" msgstr "" #: ../../:586 xena-eom>:845 msgid "``rule:volume_extension:volume_type_encryption``" msgstr "" #: ../../:1301 msgid "``scheduler_driver_init_wait_time``" msgstr "" #: ../../:397 msgid "``snapshots_deleted_project_id_idx``" msgstr "" #: ../../:68 msgid "``total_bytes_sec``" msgstr "" #: ../../:71 msgid "``total_iops_sec``" msgstr "" #: ../../:513 yoga-eom>:683 msgid "" "``volume:reimage_reserved`` - users who satisfy this policy may re-image a " "volume in status ``reserved``" msgstr "" #: ../../:511 yoga-eom>:681 msgid "" "``volume:reimage`` - users who satisfy this policy may re-image a volume in " "status ``available`` or ``error``" msgstr "" #: ../../:609 msgid "``volume_extension:quota_classes:get``" msgstr "" #: ../../:610 msgid "``volume_extension:quota_classes:update``" msgstr "" #: ../../:859 msgid "``volume_extension:quota_classes``" msgstr "" #: ../../:607 msgid "``volume_extension:quota_classes`` is replaced by:" msgstr "" #: ../../:614 msgid "``volume_extension:type_create``" msgstr "" #: ../../:616 msgid "``volume_extension:type_delete``" msgstr "" #: ../../:615 msgid "``volume_extension:type_update``" msgstr "" #: ../../:635 msgid "``volume_extension:types_extra_specs:read_sensitive``" msgstr "" #: ../../:860 msgid "``volume_extension:types_manage``" msgstr "" #: ../../:612 msgid "``volume_extension:types_manage`` is replaced by:" msgstr "" #: ../../:622 msgid "``volume_extension:volume_image_metadata:remove``" msgstr "" #: ../../:621 msgid "``volume_extension:volume_image_metadata:set``" msgstr "" #: ../../:620 msgid "``volume_extension:volume_image_metadata:show``" msgstr "" #: ../../:861 msgid "``volume_extension:volume_image_metadata``" msgstr "" #: ../../:618 msgid "``volume_extension:volume_image_metadata`` is replaced by:" msgstr "" #: ../../:628 msgid "``volume_extension:volume_type_access:get_all_for_type``" msgstr "" #: ../../:821 stable/ussuri>:1240 msgid "``volume_extension:volume_type_encryption:create``" msgstr "" #: ../../:824 stable/ussuri>:1243 msgid "``volume_extension:volume_type_encryption:delete``" msgstr "" #: ../../:822 stable/ussuri>:1241 msgid "``volume_extension:volume_type_encryption:get``" msgstr "" #: ../../:823 stable/ussuri>:1242 msgid "``volume_extension:volume_type_encryption:update``" msgstr "" #: ../../:396 msgid "``volumes_deleted_host_idx``" msgstr "" #: ../../:395 msgid "``volumes_deleted_project_id_idx``" msgstr "" #: ../../:67 msgid "``write_bytes_sec``" msgstr "" #: ../../:70 msgid "``write_iops_sec``" msgstr "" #: ../../:230 msgid "``{host}``" msgstr "" #: ../../:248 msgid "``{host}``: 1" msgstr "" #: ../../:227 msgid "``{ip}``" msgstr "" #: ../../:247 msgid "``{ip}``: 15" msgstr "" #: ../../:224 msgid "``{wwn}``" msgstr "" #: ../../:246 msgid "``{wwn}``: 16" msgstr "" #: ../../:602 msgid "" "`bug #2000724 `_: Handled " "the case when glance is calling online extend and external events were being " "sent to nova. Now Cinder will only send external events when the volume, to " "be extended, is attached to a nova instance." msgstr "" #: ../../:227 msgid "" "`iSCSI driver only.` This is replaced with the IP address of the connecting " "node." msgstr "" #: ../../:252 msgid "" "characters that are not permitted for this parameter, they are replaced with " "``_``." msgstr "" #: ../../:1073 msgid "http://cinderstats.ivehearditbothways.com/cireport.txt" msgstr "" #: ../../:668 msgid "https://bugs.launchpad.net/os-brick/+bugs?field.tag=nvme" msgstr "" #: ../../:241 msgid "iSCSI driver: 32" msgstr "" #: ../../:266 msgid "iSCSI driver: ``HBSD-{host}-{ip}``" msgstr "" #: ../../:236 msgid "iSCSI driver: ``{ip}``" msgstr "" #: ../../:610 stable/ussuri>:648 #: victoria-eom>:1015 msgid "" "if a ``snapshot_id`` is supplied in the request, the volume type is inferred " "from the volume type associated with the snapshot" msgstr "" #: ../../:608 stable/ussuri>:646 #: victoria-eom>:1013 msgid "" "if a ``source_volid`` is supplied in the request, the volume type is " "inferred from the source volume's volume type" msgstr "" #: ../../:612 stable/ussuri>:650 #: victoria-eom>:1017 msgid "" "if an ``imageRef`` is supplied in the request, and the image has a " "``cinder_img_volume_type`` image property, the volume type is inferred from " "the value of that image property" msgstr "" #: ../../:630 msgid "" "nvmeof target `bug #1966513 `_: Fixed LVM failing on terminate_connection if the connecting host " "doesn't have an iSCSI initiator name setup, for example if LVM is using the " "nvmet target." msgstr "" #: ../../:342 msgid "" "nvmet target driver: Added support for shared subsystems/targets using the " "``lvm_share_target`` configuration option. Defaults to non shared, e.g., " "each volume has its own subsystem/target." msgstr "" #: ../../:331 msgid "" "nvmet target driver: Added support to serve volumes on multiple addresses " "using the ``target_secondary_ip_addresses`` configuration option. This " "allows os-brick to iterate through them in search of one connection that " "works, and once os-brick supports NVMe-oF multipathing it will be " "automatically supported." msgstr "" #: ../../:414 msgid "" "os-brick file lock location can be specified independently of the Cinder " "service lock location using ``lock_path`` in the ``[os_brick]`` " "configuration section. Useful for HCI deployments and when running Cinder " "and Glance with Cinder backend on the same host." msgstr "" #: ../../:586 msgid "" "vSphere 6.7 added support for vStorageObject snapshots. The " "VMwareVStorageObjectDriver is updated to use VStorageObject snapshots for " "volume snapshots." msgstr "" #: ../source/2023.1.rst:3 msgid "2023.1 Series Release Notes" msgstr "" #: ../source/2023.2.rst:3 msgid "2023.2 Series Release Notes" msgstr "" #: ../source/2024.1.rst:3 msgid "2024.1 Series Release Notes" msgstr "" #: ../source/index.rst:3 msgid "Cinder Release Notes" msgstr "" #: ../source/liberty.rst:3 msgid "Liberty Series Release Notes" msgstr "" #: ../source/liberty.rst:8 msgid "7.0.3" msgstr "" #: ../source/liberty.rst:17 ../source/mitaka.rst:17 ../source/newton.rst:525 #: ../source/ocata.rst:814 msgid "" "The qemu-img tool now has resource limits applied which prevent it from " "using more than 1GB of address space or more than 2 seconds of CPU time. " "This provides protection against denial of service attacks from maliciously " "crafted or corrupted disk images." msgstr "" #: ../source/liberty.rst:23 msgid "7.0.2" msgstr "" #: ../source/liberty.rst:32 ../source/mitaka.rst:510 msgid "" "upload-to-image using Image API v2 now correctly handles custom image " "properties." msgstr "" #: ../source/liberty.rst:38 msgid "7.0.1" msgstr "" #: ../source/liberty.rst:47 ../source/mitaka.rst:494 msgid "" "Cinder will now correctly read Keystone's endpoint for quota calls from " "keystone_authtoken.auth_uri instead of keymgr.encryption_auth_url config " "option." msgstr "" #: ../source/liberty.rst:51 msgid "" "If device attachment failed it could leave the volume partially attached. " "Cinder now tries to clean up on failure." msgstr "" #: ../source/liberty.rst:55 msgid "" "Fixed an issue when deleting a consistency group snapshot with the Dell SC " "backend driver." msgstr "" #: ../source/liberty.rst:59 msgid "" "ScaleIO volumes need to be sized in increments of 8G. Handling added to " "volume extend operations to ensure the new size is rounded up to the nearest " "size when needed." msgstr "" #: ../source/liberty.rst:63 msgid "" "Fixed issue with the EMC ScaleIO driver not able to identify a volume after " "a migration is performed." msgstr "" #: ../source/liberty.rst:67 msgid "" "An error has been corrected in the EMC ScaleIO driver that had caused all " "volumes to be provisioned at 'thick' even if user had specificed 'thin'." msgstr "" #: ../source/liberty.rst:71 msgid "Fixed an issue with live migration when using the EMC VMAX driver." msgstr "" #: ../source/liberty.rst:75 msgid "" "Removed restriction of hard coded iSCSI IP address to allow the use of " "multiple iSCSI portgroups." msgstr "" #: ../source/liberty.rst:79 msgid "" "Fixed an error in quota handling that required the keystone " "encryption_auth_url to be configured even if no encryption was being used." msgstr "" #: ../source/liberty.rst:83 msgid "" "Allow spaces when managing existing volumes with the HNAS iSCSI driver." msgstr "" #: ../source/liberty.rst:87 msgid "Capacity reporting fixed with Huawei backend drivers." msgstr "" #: ../source/liberty.rst:91 msgid "IQN identification is now case-insensitive when using LIO." msgstr "" #: ../source/liberty.rst:95 msgid "Better cleanup handling in the NetApp E-Series driver." msgstr "" #: ../source/liberty.rst:99 msgid "Fixed issue with extra-specs not being applied when cloning a volume." msgstr "" #: ../source/liberty.rst:103 msgid "" "Add ability to enable multi-initiator support to allow live migration in the " "Nimble backend driver." msgstr "" #: ../source/liberty.rst:107 msgid "" "Fixed issue with error being raised when performing a delete quota operation " "in a subproject." msgstr "" #: ../source/liberty.rst:117 msgid "Start using reno to manage release notes." msgstr "" #: ../source/mitaka.rst:3 msgid "Mitaka Series Release Notes" msgstr "" #: ../source/mitaka.rst:8 msgid "8.1.1-11" msgstr "" #: ../source/mitaka.rst:23 msgid "8.1.1" msgstr "" #: ../source/mitaka.rst:32 ../source/newton.rst:117 msgid "Report pools in volume stats for Block Device Driver." msgstr "" #: ../source/mitaka.rst:36 msgid "Support Force backup of in-use cinder volumes for Nimble Storage." msgstr "" #: ../source/mitaka.rst:40 msgid "Added support for vhd disk-format for volume upload-to-image." msgstr "" #: ../source/mitaka.rst:50 ../source/newton.rst:535 msgid "" "3PAR driver creates FC VLUN of match-set type instead of host sees. With " "match-set, the host will see the virtual volume on specified NSP (Node-Slot-" "Port). This change in vlun type fixes bug 1577993." msgstr "" #: ../source/mitaka.rst:54 ../source/newton.rst:567 msgid "" "Fix issue with PureFCDriver where partially case sensitive comparison of " "connector wwpn could cause initialize_connection to fail when attempting to " "create duplicate Purity host." msgstr "" #: ../source/mitaka.rst:60 msgid "8.1.0" msgstr "" #: ../source/mitaka.rst:69 ../source/newton.rst:129 msgid "" "Support for use of 'fc_southbound_protocol' configuration setting in the " "Brocade FC SAN lookup service." msgstr "" #: ../source/mitaka.rst:79 ../source/newton.rst:461 msgid "" "The VMware VMDK driver supports a new config option 'vmware_host_port' to " "specify the port number to connect to vCenter server." msgstr "" #: ../source/mitaka.rst:89 ../source/newton.rst:543 msgid "" "Projects with the admin role are now allowed to operate on the quotas of all " "other projects." msgstr "" #: ../source/mitaka.rst:93 ../source/newton.rst:583 msgid "" "Added support for images with vmware_adaptertype set to paraVirtual in the " "VMDK driver." msgstr "" #: ../source/mitaka.rst:99 msgid "8.0.0" msgstr "" #: ../source/mitaka.rst:108 msgid "" "Added support for creating a consistency group from a source consistency " "group in the HPE 3PAR driver." msgstr "" #: ../source/mitaka.rst:112 msgid "Disable standard capabilities based on 3PAR licenses." msgstr "" #: ../source/mitaka.rst:116 msgid "Added snapshot manage/unmanage support to the HPE 3PAR driver." msgstr "" #: ../source/mitaka.rst:120 msgid "Added replication v2.1 support to the Dell Storage Center drivers." msgstr "" #: ../source/mitaka.rst:124 msgid "Added v2.1 replication support in Huawei Cinder driver." msgstr "" #: ../source/mitaka.rst:128 msgid "" "Added support for creating, deleting, and updating consistency groups for " "NetApp 7mode and CDOT backends." msgstr "" #: ../source/mitaka.rst:132 msgid "" "Added support for taking, deleting, and restoring a cgsnapshot for NetApp " "7mode and CDOT backends." msgstr "" #: ../source/mitaka.rst:136 msgid "Added backend driver for Coho Data storage." msgstr "" #: ../source/mitaka.rst:140 msgid "Added cinder backup driver for Google Cloud Storage." msgstr "" #: ../source/mitaka.rst:144 msgid "Added driver for Tegile IntelliFlash arrays." msgstr "" #: ../source/mitaka.rst:148 msgid "Added ability to backup snapshots." msgstr "" #: ../source/mitaka.rst:152 msgid "Support balanced FC port selection for Huawei drivers." msgstr "" #: ../source/mitaka.rst:156 msgid "" "HTTP connector for the Cinder Brocade FC Zone plugin. This connector allows " "for communication between the Brocade FC zone plugin and the switch to be " "over HTTP or HTTPs. To make use of this connector, the user would add a " "configuration setting in the fabric block for a Brocade switch with the name " "as 'fc_southbound_protocol' with a value as 'HTTP' or 'HTTPS'." msgstr "" #: ../source/mitaka.rst:160 msgid "" "Support for configuring Fibre Channel zoning on Brocade switches through " "Cinder Fibre Channel Zone Manager and Brocade Fibre Channel zone plugin. To " "zone in a Virtual Fabric, set the configuration option " "'fc_virtual_fabric_id' for the fabric." msgstr "" #: ../source/mitaka.rst:164 msgid "The consistency group API now returns volume type IDs." msgstr "" #: ../source/mitaka.rst:168 msgid "Added support for API microversions, as well as /v3 API endpoint." msgstr "" #: ../source/mitaka.rst:172 msgid "Retype support added to CloudByte iSCSI driver." msgstr "" #: ../source/mitaka.rst:176 msgid "" "All Datera DataFabric backed volume-types will now use API version 2 with " "Datera DataFabric" msgstr "" #: ../source/mitaka.rst:180 msgid "" "It is now possible to delete a volume and its snapshots by passing an " "additional argument to volume delete, \"cascade=True\"." msgstr "" #: ../source/mitaka.rst:184 msgid "" "New config option to enable discard (trim/unmap) support for any backend." msgstr "" #: ../source/mitaka.rst:188 msgid "Added backend driver for DISCO storage." msgstr "" #: ../source/mitaka.rst:192 msgid "" "Cinder FC Zone Manager Friendly Zone Names This feature adds support for " "Fibre Channel user friendly zone names if implemented by the volume driver. " "If the volume driver passes the host name and storage system to the Fibre " "Channel Zone Manager in the conn_info structure, the zone manager will use " "these names in structuring the zone name to provide a user friendly zone " "name." msgstr "" #: ../source/mitaka.rst:196 msgid "Added backend driver for Fujitsu ETERNUS DX (FC)." msgstr "" #: ../source/mitaka.rst:200 msgid "Added backend driver for Fujitsu ETERNUS DX (iSCSI)." msgstr "" #: ../source/mitaka.rst:204 msgid "Added manage/unmanage snapshot support for Huawei drivers." msgstr "" #: ../source/mitaka.rst:208 msgid "Added manage/unmanage volume support for Huawei drivers." msgstr "" #: ../source/mitaka.rst:212 msgid "" "Support cinder_img_volume_type property in glance image metadata to specify " "volume type." msgstr "" #: ../source/mitaka.rst:216 msgid "" "Consistency group support has been added to the LeftHand backend driver." msgstr "" #: ../source/mitaka.rst:220 msgid "Added snapshot manage/unmanage support to the HPE LeftHand driver." msgstr "" #: ../source/mitaka.rst:224 msgid "Added iSCSI CHAP uni-directional authentication for NetApp drivers." msgstr "" #: ../source/mitaka.rst:228 msgid "Support for Consistency Groups in the NetApp E-Series Volume Driver." msgstr "" #: ../source/mitaka.rst:232 ../source/rocky.rst:421 msgid "Added backend driver for Nexenta Edge iSCSI storage." msgstr "" #: ../source/mitaka.rst:236 msgid "Added backend driver for NexentaStor5 iSCSI storage." msgstr "" #: ../source/mitaka.rst:240 msgid "Added backend driver for NexentaStor5 NFS storage." msgstr "" #: ../source/mitaka.rst:244 msgid "" "Manage and unmanage support has been added to the Nimble backend driver." msgstr "" #: ../source/mitaka.rst:248 msgid "" "Added additional metrics reported to the scheduler for Pure Volume Drivers " "for better filtering and weighing functions." msgstr "" #: ../source/mitaka.rst:252 msgid "" "Added config option to enable/disable automatically calculation an over-" "subscription ratio max for Pure Volume Drivers. When disabled the drivers " "will now respect the max_oversubscription_ratio config option." msgstr "" #: ../source/mitaka.rst:256 msgid "" "New config option for Pure Storage volume drivers pure_eradicate_on_delete. " "When enabled will permanantly eradicate data instead of placing into pending " "eradication state." msgstr "" #: ../source/mitaka.rst:260 msgid "" "Added Cheesecake (v2.1) replication support to the Pure Storage Volume " "drivers." msgstr "" #: ../source/mitaka.rst:264 msgid "Added Migrate and Extend for Nexenta NFS driver." msgstr "" #: ../source/mitaka.rst:268 msgid "Added Retype functionality to Nexenta iSCSI and NFS drivers." msgstr "" #: ../source/mitaka.rst:272 msgid "Added v2.1 replication support to the HPE 3PAR driver." msgstr "" #: ../source/mitaka.rst:276 msgid "Added v2.1 replication support to the HPE LeftHand driver." msgstr "" #: ../source/mitaka.rst:280 msgid "Added replication v2.1 support to the IBM Storwize driver." msgstr "" #: ../source/mitaka.rst:284 msgid "" "Added RPC backward compatibility layer similar to the one implemented in " "Nova. This means that Cinder services can be upgraded one-by-one without " "breakage. After all the services are upgraded SIGHUP signals should be " "issued to all the services to signal them to reload cached minimum RPC " "versions. Alternative is of course restart of them. Please note that cinder-" "api service doesn't support SIGHUP yet. Please also take into account that " "all the rolling upgrades capabilities are considered tech preview, as we " "don't have a CI testing it yet." msgstr "" #: ../source/mitaka.rst:288 msgid "Added Consistency Group support in ScaleIO driver." msgstr "" #: ../source/mitaka.rst:292 msgid "Added support for manage/unmanage volume in the ScaleIO driver." msgstr "" #: ../source/mitaka.rst:296 msgid "Added QoS support in ScaleIO driver." msgstr "" #: ../source/mitaka.rst:300 msgid "" "cinder-backup service is now decoupled from cinder-volume, which allows more " "flexible scaling." msgstr "" #: ../source/mitaka.rst:304 msgid "" "Split nested quota support into a separate driver. In order to use nested " "quotas, change the following config ``quota_driver = cinder.quota." "NestedDbQuotaDriver`` after running the following admin API \"os-quota-sets/" "validate_setup_for_nested_quota_use\" command to ensure the existing quota " "values make sense to nest." msgstr "" #: ../source/mitaka.rst:308 msgid "Added multiple management IP support to Storwize SVC driver." msgstr "" #: ../source/mitaka.rst:312 msgid "Added multiple pools support to Storwize SVC driver." msgstr "" #: ../source/mitaka.rst:316 msgid "" "Added support for ZeroMQ messaging driver in cinder single backend config." msgstr "" #: ../source/mitaka.rst:320 msgid "" "Locks may use Tooz as abstraction layer now, to support distributed lock " "managers and prepare Cinder to better support HA configurations." msgstr "" #: ../source/mitaka.rst:324 msgid "The updated_at timestamp is now returned in listing detail." msgstr "" #: ../source/mitaka.rst:328 msgid "Added support for manage volume in the VMware VMDK driver." msgstr "" #: ../source/mitaka.rst:332 msgid "Configrable migration rate in VNX driver via metadata" msgstr "" #: ../source/mitaka.rst:336 msgid "Adds v2.1 replication support in VNX Cinder driver." msgstr "" #: ../source/mitaka.rst:340 msgid "Cloning of consistency group added to EMC VNX backend driver." msgstr "" #: ../source/mitaka.rst:344 msgid "Added replication v2.1 support to the IBM XIV/DS8K driver." msgstr "" #: ../source/mitaka.rst:348 msgid "" "Support for creating a consistency group from consistency group in XtremIO." msgstr "" #: ../source/mitaka.rst:352 msgid "Volume manage/unmanage support for Oracle ZFSSA iSCSI and NFS drivers." msgstr "" #: ../source/mitaka.rst:362 msgid "" "Cinder services are now automatically downgrading RPC messages to be " "understood by the oldest version of a service among all the deployment. " "Disabled and dead services are also taken into account. It is important to " "keep service list up to date, without old, unused records. This can be done " "using ``cinder-manage service remove`` command. Once situation is cleaned up " "services should be either restarted or ``SIGHUP`` signal should be issued to " "their processes to force them to reload version pins. Please note that " "cinder-api does not support ``SIGHUP`` signal." msgstr "" #: ../source/mitaka.rst:372 msgid "" "It is required to copy new rootwrap.d/volume.filters file into /etc/cinder/" "rootwrap.d directory." msgstr "" #: ../source/mitaka.rst:376 msgid "Violin Memory 6000 array series drivers are removed." msgstr "" #: ../source/mitaka.rst:380 msgid "" "Adding or removing volume_type_access from any project during DB migration " "62 must not be performed." msgstr "" #: ../source/mitaka.rst:384 msgid "" "When running PostgreSQL it is required to upgrade and restart all the cinder-" "api services along with DB migration 62." msgstr "" #: ../source/mitaka.rst:388 msgid "" "Users of the Datera Cinder driver are now required to use Datera DataFabric " "version 1.0+. Versions before 1.0 will not be able to utilize this new " "driver since they still function on v1 of the Datera DataFabric API" msgstr "" #: ../source/mitaka.rst:392 msgid "The VMware VMDK driver now enforces minimum vCenter version of 5.1." msgstr "" #: ../source/mitaka.rst:396 msgid "" "If during a *live* upgrade from Liberty a backup service will be killed " "while processing a restore request it may happen that such backup status " "won't be automatically cleaned up on the service restart. Such orphaned " "backups need to be cleaned up manually." msgstr "" #: ../source/mitaka.rst:400 msgid "" "When performing a *live* upgrade from Liberty it may happen that retype " "calls will reserve additional quota. As by default quota reservations are " "invalidated after 24 hours (config option ``reservation_expire=86400``), we " "recommend either decreasing that time or watching for unused quota " "reservations manually during the upgrade process." msgstr "" #: ../source/mitaka.rst:404 msgid "" "HP drivers have been rebranded to HPE. Existing configurations will continue " "to work with the legacy name, but will need to be updated by the next " "release." msgstr "" #: ../source/mitaka.rst:408 msgid "The deprecated HP CLIQ proxy driver has now been removed." msgstr "" #: ../source/mitaka.rst:412 msgid "" "Users of the ibmnas driver should switch to using the IBM GPFS driver to " "enable Cinder access to IBM NAS resources. For details configuring the IBM " "GPFS driver, see the GPFS config reference. - http://docs.openstack.org/" "liberty/config-reference/content/GPFS-driver.html" msgstr "" #: ../source/mitaka.rst:416 msgid "" "Removed deprecated LVMISCSIDriver and LVMISERDriver. These should be " "switched to use the LVMVolumeDriver with the desired iscsi_helper " "configuration set to the desired iSCSI helper." msgstr "" #: ../source/mitaka.rst:420 msgid "Removed the deprecated NPIV options for the Storwize backend driver." msgstr "" #: ../source/mitaka.rst:424 msgid "Backend driver for Scality SRB has been removed." msgstr "" #: ../source/mitaka.rst:428 msgid "" "Rename Huawei18000ISCSIDriver and Huawei18000FCDriver to HuaweiISCSIDriver " "and HuaweiFCDriver." msgstr "" #: ../source/mitaka.rst:432 msgid "" "Starting from Mitaka release Cinder is having a tech preview of rolling " "upgrades support." msgstr "" #: ../source/mitaka.rst:436 msgid "Removed force_delete option from ScaleIO configuration." msgstr "" #: ../source/mitaka.rst:440 msgid "" "As cinder-backup was strongly reworked in this release, the recommended " "upgrade order when executing live (rolling) upgrade is c-api->c-sch->c-vol-" ">c-bak." msgstr "" #: ../source/mitaka.rst:444 msgid "" "Nested quotas will no longer be used by default, but can be configured by " "setting ``quota_driver = cinder.quota.NestedDbQuotaDriver``" msgstr "" #: ../source/mitaka.rst:448 msgid "" "Removed storwize_svc_connection_protocol config setting. Users will now need " "to set different values for volume_driver in cinder.conf. FC:volume_driver = " "cinder.volume.drivers.ibm.storwize_svc.storwize_svc_fc.StorwizeSVCFCDriver " "iSCSI:volume_driver = cinder.volume.drivers.ibm.storwize_svc." "storwize_svc_iscsi.StorwizeSVCISCSIDriver" msgstr "" #: ../source/mitaka.rst:452 msgid "The VMware VMDK driver for ESX server has been removed." msgstr "" #: ../source/mitaka.rst:462 msgid "" "datera_api_token -- this has been replaced by san_login and san_password" msgstr "" #: ../source/mitaka.rst:466 msgid "" "The XML API has been marked deprecated and will be removed in a future " "release." msgstr "" #: ../source/mitaka.rst:470 msgid "Deprecated IBM driver _multipath_enabled config flags." msgstr "" #: ../source/mitaka.rst:480 msgid "" "Pure Storage Volume Drivers can now utilize driver_ssl_cert_verify and " "driver_ssl_cert_path config options to allow for secure https requests to " "the FlashArray." msgstr "" #: ../source/mitaka.rst:490 msgid "" "Fixed bug causing snapshot creation to fail on systems with LC_NUMERIC set " "to locale using ',' as decimal separator." msgstr "" #: ../source/mitaka.rst:498 msgid "" "Fixed service state reporting when backup manager is unable to initialize " "one of the backup drivers." msgstr "" #: ../source/mitaka.rst:502 msgid "" "Consistency group creation previously scheduled at the pool level. Now it is " "fixed to schedule at the backend level as designed." msgstr "" #: ../source/mitaka.rst:506 msgid "" "Removed the need for deployers to run tox for config reference generation." msgstr "" #: ../source/mitaka.rst:514 msgid "" "Enabled a cloud operator to correctly manage policy for volume type " "operations. To permit volume type operations for specific user, you can for " "example do as follows." msgstr "" #: ../source/mitaka.rst:518 msgid "Add ``storage_type_admin`` role." msgstr "" #: ../source/mitaka.rst:519 msgid "Add ``admin_or_storage_type_admin`` rule to ``policy.json``, e.g." msgstr "" #: ../source/mitaka.rst:520 msgid "" "``\"admin_or_storage_type_admin\": \"is_admin:True or role:" "storage_type_admin\",``" msgstr "" #: ../source/mitaka.rst:522 msgid "" "``\"volume_extension:types_manage\": \"rule:admin_or_storage_type_admin\", " "\"volume_extension:volume_type_access:addProjectAccess\": \"rule:" "admin_or_storage_type_admin\", \"volume_extension:volume_type_access:" "removeProjectAccess\": \"rule:admin_or_storage_type_admin\",``" msgstr "" #: ../source/mitaka.rst:524 msgid "Modify rule for types_manage and volume_type_access, e.g." msgstr "" #: ../source/mitaka.rst:528 msgid "" "Fixed issue where Pure Volume Drivers would ignore reserved_percentage " "config option." msgstr "" #: ../source/mitaka.rst:532 msgid "" "Allow for eradicating Pure Storage volumes, snapshots, and pgroups when " "deleting their Cinder counterpart." msgstr "" #: ../source/mitaka.rst:536 msgid "Corrected quota usage when transferring a volume between tenants." msgstr "" #: ../source/mitaka.rst:540 msgid "" "Previously the only way to remove volumes in error states from a consistency-" "group was to delete the consistency group and create it again. Now it is " "possible to remove volumes in error and error_deleting states." msgstr "" #: ../source/mitaka.rst:544 msgid "" "Fix for Tintri image direct clone feature. Fix for the bug 1400966 prevents " "user from specifying image \"nfs share location\" as location value for an " "image. Now, in order to use Tintri image direct clone, user can specify " "\"provider_location\" in image metadata to specify image nfs share location. " "NFS share which hosts images should be specified in a file using " "tintri_image_shares_config config option." msgstr "" #: ../source/mitaka.rst:548 msgid "" "Filtering volumes by their display name now correctly handles display names " "with single and double quotes." msgstr "" #: ../source/mitaka.rst:558 msgid "" "Due to the ibmnas (SONAS) driver being rendered redundant by the addition of " "NFS capabilities to the IBM GPFS driver, the ibmnas driver is being removed " "in the Mitaka release." msgstr "" #: ../source/newton.rst:3 msgid "Newton Series Release Notes" msgstr "" #: ../source/newton.rst:8 msgid "9.1.2" msgstr "" #: ../source/newton.rst:17 ../source/ocata.rst:836 msgid "" "Fixed an issue where the NetApp cDOT NFS driver failed to clone new volumes " "from the image cache." msgstr "" #: ../source/newton.rst:23 msgid "9.1.1" msgstr "" #: ../source/newton.rst:32 msgid "Fixed Non-WAN port filter issue in Kaminario iSCSI driver" msgstr "" #: ../source/newton.rst:36 ../source/ocata.rst:852 msgid "" "Fixed issue of managing a VG with more than one volume in Kaminario FC and " "iSCSI Cinder drivers." msgstr "" #: ../source/newton.rst:42 msgid "9.1.0" msgstr "" #: ../source/newton.rst:51 ../source/ocata.rst:832 msgid "" "The NetApp cDOT driver now sets the ``replication_status`` attribute " "appropriately on volumes created within replicated backends when using host " "level replication." msgstr "" #: ../source/newton.rst:57 msgid "9.0.0" msgstr "" #: ../source/newton.rst:66 msgid "" "Everything in Cinder's release notes related to the High Availability Active-" "Active effort -preluded with \"HA A-A:\"- is work in progress and should not " "be used in production until it has been completed and the appropriate " "release note has been issued stating its readiness for production." msgstr "" #: ../source/newton.rst:71 msgid "" "The default key manager interface in Cinder was deprecated and the Castellan " "key manager interface library is now used instead. For more information " "about Castellan, please see http://docs.openstack.org/developer/castellan/ ." msgstr "" #: ../source/newton.rst:81 msgid "" "dell_server_os option added to the Dell SC driver. This option allows the " "selection of the server type used when creating a server on the Dell DSM " "during initialize connection. This is only used if the server does not exist." " Valid values are from the Dell DSM create server list." msgstr "" #: ../source/newton.rst:85 msgid "" "Added support for the use of live volume in place of standard replication in " "the Dell SC driver." msgstr "" #: ../source/newton.rst:89 msgid "Added replication failback support for the Dell SC driver." msgstr "" #: ../source/newton.rst:93 msgid "Added volume driver for Zadara Storage VPSA." msgstr "" #: ../source/newton.rst:97 msgid "" "Added a new config option `scheduler_weight_handler`. This is a global " "option which specifies how the scheduler should choose from a listed of " "weighted pools. By default the existing weigher is used which always chooses " "the highest weight." msgstr "" #: ../source/newton.rst:101 msgid "" "Added a new weight handler `StochasticHostWeightHandler`. This weight " "handler chooses pools randomly, where the random probabilities are " "proportional to the weights, so higher weighted pools are chosen more " "frequently, but not all the time. This weight handler spreads new shares " "across available pools more fairly." msgstr "" #: ../source/newton.rst:105 msgid "" "Allow API user to remove the consistency group name or description " "information." msgstr "" #: ../source/newton.rst:109 msgid "Support for snapshot backup using the optimal path in Huawei driver." msgstr "" #: ../source/newton.rst:113 msgid "Added REST API to update backup name and description." msgstr "" #: ../source/newton.rst:121 msgid "" "Updating the Datera Elastic DataFabric Storage Driver to version 2.1. This " "adds ACL support, Multipath support and basic IP pool support." msgstr "" #: ../source/newton.rst:125 msgid "Changes config option default for datera_num_replicas from 1 to 3" msgstr "" #: ../source/newton.rst:133 msgid "Added Keystone v3 support for Swift backup driver in single user mode." msgstr "" #: ../source/newton.rst:137 msgid "Added volume backend drivers for CoprHD FC, iSCSI and Scaleio." msgstr "" #: ../source/newton.rst:141 msgid "" "HA A-A: Add cluster configuration option to allow grouping hosts that share " "the same backend configurations and should work in Active-Active fashion." msgstr "" #: ../source/newton.rst:145 msgid "" "HA A-A: Updated manage command to display cluster information on service " "listings." msgstr "" #: ../source/newton.rst:149 msgid "" "HA A-A: Added cluster subcommand in manage command to list, remove, and " "rename clusters." msgstr "" #: ../source/newton.rst:153 msgid "" "HA A-A: Added clusters API endpoints for cluster related operations (index, " "detail, show, enable/disable). Index and detail accept filtering by `name`, " "`binary`, `disabled`, `num_hosts`, `num_down_hosts`, and up/down status " "(`is_up`) as URL parameters. Also added their respective policies." msgstr "" #: ../source/newton.rst:157 msgid "Separate create and update rules for volume metadata." msgstr "" #: ../source/newton.rst:161 msgid "Capabilites List for Datera Volume Drivers" msgstr "" #: ../source/newton.rst:165 msgid "Extended Volume-Type Support for Datera Volume Drivers" msgstr "" #: ../source/newton.rst:169 msgid "Naming convention change for Datera Volume Drivers" msgstr "" #: ../source/newton.rst:173 msgid "Volume Manage/Unmanage support for Datera Volume Drivers" msgstr "" #: ../source/newton.rst:177 msgid "" "New BoolOpt ``datera_debug_override_num_replicas`` for Datera Volume Drivers" msgstr "" #: ../source/newton.rst:181 msgid "" "Added using etags in API calls to avoid the lost update problem during " "deleting volume metadata." msgstr "" #: ../source/newton.rst:185 msgid "" "Configuration options for the DRBD driver that will be applied to DRBD " "resources; the default values should be okay for most installations." msgstr "" #: ../source/newton.rst:189 msgid "Added manage/unmanage volume support for Dell Equallogic driver." msgstr "" #: ../source/newton.rst:193 msgid "Added backend driver for FalconStor FreeStor." msgstr "" #: ../source/newton.rst:197 msgid "Added backend driver for Huawei FusionStorage." msgstr "" #: ../source/newton.rst:201 msgid "" "Introduced generic volume groups and added create/ delete/update/list/show " "APIs for groups." msgstr "" #: ../source/newton.rst:205 msgid "" "Added create/delete APIs for group snapshots and an API to create group from " "source." msgstr "" #: ../source/newton.rst:209 msgid "Added group type and group specs APIs." msgstr "" #: ../source/newton.rst:213 msgid "Added manage/unmanage snapshot support to the HNAS NFS driver." msgstr "" #: ../source/newton.rst:217 msgid "Add support for reporting pool disk type in Huawei driver." msgstr "" #: ../source/newton.rst:221 msgid "Add support for hybrid aggregates to the NetApp cDOT drivers." msgstr "" #: ../source/newton.rst:225 msgid "" "Volume manage/unmanage support for IBM FlashSystem FC and iSCSI drivers." msgstr "" #: ../source/newton.rst:229 msgid "" "Added support for querying volumes filtered by group_id using 'group_id' " "optional URL parameter. For example, \"volumes/detail?group_id=" "{consistency_group_id}\"." msgstr "" #: ../source/newton.rst:233 msgid "New FC Cinder volume driver for Kaminario K2 all-flash arrays." msgstr "" #: ../source/newton.rst:237 msgid "New iSCSI Cinder volume driver for Kaminario K2 all-flash arrays." msgstr "" #: ../source/newton.rst:241 msgid "" "Added the ability to list manageable volumes and snapshots via GET operation " "on the /v2//os-volume-manage and /v2//os-snapshot-" "manage URLs, respectively." msgstr "" #: ../source/newton.rst:245 msgid "" "The v2 API extensions os-volume-manage and os-snapshot-manage have been " "mapped to the v3 resources manageable_volumes and manageable_snapshots" msgstr "" #: ../source/newton.rst:249 msgid "" "Added host-level (whole back end replication - v2.1) replication support to " "the NetApp cDOT drivers (iSCSI, FC, NFS)." msgstr "" #: ../source/newton.rst:253 msgid "Added Cinder consistency group for the NetApp NFS driver." msgstr "" #: ../source/newton.rst:257 msgid "Added HA support for NexentaEdge iSCSI driver" msgstr "" #: ../source/newton.rst:261 msgid "Added NBD driver for NexentaEdge." msgstr "" #: ../source/newton.rst:265 msgid "Support for force backup of in-use Cinder volumes in Nimble driver." msgstr "" #: ../source/newton.rst:269 msgid "" "Add get_manageable_volumes and get_manageable_snapshots implementations for " "Pure Storage Volume Drivers." msgstr "" #: ../source/newton.rst:273 msgid "" "The xiv_ds8k driver now supports IBM XIV, Spectrum Accelerate, FlashSystem " "A9000, FlashSystem A9000R and DS8000 storage systems, and was renamed to IBM " "Storage Driver for OpenStack. The changes include text changes, file names, " "names of cinder.conf flags, and names of the proxy classes." msgstr "" #: ../source/newton.rst:277 msgid "" "Support for retype volumes with different encryptions including changes from " "unencrypted types to encrypted types and vice-versa." msgstr "" #: ../source/newton.rst:281 msgid "Added support for manage/unmanage snapshot in the ScaleIO driver." msgstr "" #: ../source/newton.rst:285 msgid "" "Added support for scaling QoS in the ScaleIO driver. The new QoS keys are " "maxIOPSperGB and maxBWSperGB." msgstr "" #: ../source/newton.rst:289 msgid "" "Added support for oversubscription in thin provisioning in the ScaleIO " "driver. Volumes should have extra_specs with the key provisioning:type with " "value equals to either 'thick' or 'thin'. max_oversubscription_ratio can be " "defined by the global config or for ScaleIO specific with the config option " "sio_max_over_subscription_ratio. The maximum oversubscription ratio " "supported at the moment is 10.0." msgstr "" #: ../source/newton.rst:293 msgid "Added v2.1 replication support to SolidFire driver." msgstr "" #: ../source/newton.rst:297 msgid "Added consistency group support to the Huawei driver." msgstr "" #: ../source/newton.rst:301 msgid "" "Added support for querying volumes filtered by glance metadata key/value " "using 'glance_metadata' optional URL parameter. For example, \"volumes/" "detail?glance_metadata={\"image_name\":\"xxx\"}\"." msgstr "" #: ../source/newton.rst:305 msgid "Added supported driver checks on all drivers." msgstr "" #: ../source/newton.rst:309 msgid "Added backend driver for Synology iSCSI-supported storage." msgstr "" #: ../source/newton.rst:313 msgid "" "Added support for vhd and vhdx disk-formats for volume upload-to-image." msgstr "" #: ../source/newton.rst:317 msgid "Support for iSCSI multipathing in EMC VMAX driver." msgstr "" #: ../source/newton.rst:321 msgid "Added oversubscription support in the VMAX driver" msgstr "" #: ../source/newton.rst:325 msgid "QoS support in EMC VMAX iSCSI and FC drivers." msgstr "" #: ../source/newton.rst:329 msgid "Added backend driver for Violin Memory 7000 iscsi storage." msgstr "" #: ../source/newton.rst:333 msgid "" "New Cinder driver based on storops library (available in pypi) for EMC VNX." msgstr "" #: ../source/newton.rst:337 msgid "" "A new API to display the volumes summary. This summary API displays the " "total number of volumes and total volume's size in GB." msgstr "" #: ../source/newton.rst:341 msgid "Added snapshot manage/unmanage support to the EMC XtremIO driver." msgstr "" #: ../source/newton.rst:345 msgid "Added backend driver for ZTE iSCSI storage." msgstr "" #: ../source/newton.rst:355 msgid "" "When running Nova Compute and Cinder Volume or Backup services on the same " "host they must use a shared lock directory to avoid rare race conditions " "that can cause volume operation failures (primarily attach/detach of " "volumes). This is done by setting the \"lock_path\" to the same directory in " "the \"oslo_concurrency\" section of nova.conf and cinder.conf. This issue " "affects all previous releases utilizing os-brick and shared operations on " "hosts between Nova Compute and Cinder data services." msgstr "" #: ../source/newton.rst:365 ../source/ocata.rst:540 msgid "" "In certain environments (Kubernetes for example) indirect calls to the LVM " "commands result in file descriptor leak warning messages which in turn cause " "the process_execution method to raise and exception." msgstr "" #: ../source/newton.rst:369 ../source/ocata.rst:544 msgid "" "To accommodate these environments, and to maintain backward compatibility in " "Newton we add a ``lvm_suppress_fd_warnings`` bool config to the LVM driver. " "Setting this to True will append the LVM env vars to include the variable " "``LVM_SUPPRESS_FD_WARNINGS=1``." msgstr "" #: ../source/newton.rst:374 ../source/ocata.rst:549 msgid "" "This is made an optional configuration because it only applies to very " "specific environments. If we were to make this global that would require a " "rootwrap/privsep update that could break compatibility when trying to do " "rolling upgrades of the volume service." msgstr "" #: ../source/newton.rst:381 msgid "" "The 'backup_service_inithost_offload' configuration option now defaults to " "'True' instead of 'False'." msgstr "" #: ../source/newton.rst:385 msgid "" "If policy for update volume metadata is modified in a desired way it's " "needed to add a desired rule for create volume metadata." msgstr "" #: ../source/newton.rst:389 msgid "" "The Cinder database can now only be upgraded from changes since the Kilo " "release. In order to upgrade from a version prior to that, you must now " "upgrade to at least Kilo first, then to Newton or later." msgstr "" #: ../source/newton.rst:393 msgid "" "Any Volume Drivers configured in the DEFAULT config stanza should be moved " "to their own stanza and enabled via the enabled_backends config option. The " "older style of config with DEFAULT is deprecated and will be removed in " "future releases." msgstr "" #: ../source/newton.rst:397 msgid "" "HNAS drivers have new configuration paths. Users should now use ``cinder." "volume.drivers.hitachi.hnas_nfs.HNASNFSDriver`` for HNAS NFS driver and " "``cinder.volume.drivers.hitachi.hnas_iscsi.HNASISCSIDriver`` for HNAS iSCSI " "driver." msgstr "" #: ../source/newton.rst:401 msgid "HNAS drivers will now read configuration from cinder.conf." msgstr "" #: ../source/newton.rst:405 msgid "Support for iSCSI multipath in Huawei driver." msgstr "" #: ../source/newton.rst:409 msgid "Support iSCSI configuration in replication in Huawei driver." msgstr "" #: ../source/newton.rst:413 msgid "" "The Scality driver has been marked as unsupported and is now deprecated. " "enable_unsupported_drivers will need to be set to True in cinder.conf to " "continue to use it." msgstr "" #: ../source/newton.rst:417 msgid "" "While configuring NetApp cDOT back ends, new configuration options " "('replication_device' and 'netapp_replication_aggregate_map') must be added " "in order to use the host-level failover feature." msgstr "" #: ../source/newton.rst:421 msgid "" "Pure volume drivers will need 'purestorage' python module v1.6.0 or newer. " "Support for 1.4.x has been removed." msgstr "" #: ../source/newton.rst:425 msgid "" "The XML API has been removed in Newton release. Cinder supports only JSON " "API request/response format now." msgstr "" #: ../source/newton.rst:429 msgid "" "The ISERTgtAdm target was deprecated in the Kilo release. It has now been " "removed. You should now just use LVMVolumeDriver and specify iscsi_helper " "for the target driver you wish to use. In order to enable iser, please set " "iscsi_protocol=iser with lioadm or tgtadm target helpers." msgstr "" #: ../source/newton.rst:433 msgid "" "The config options ``scheduler_topic``, ``volume_topic`` and " "``backup_topic`` have been removed without a deprecation period as these had " "never worked correctly." msgstr "" #: ../source/newton.rst:437 msgid "" "Users of the IBM Storage Driver, previously known as the IBM XIV/DS8K " "driver, upgrading from Mitaka or previous releases, need to reconfigure the " "relevant cinder.conf entries. In most cases the change is just removal of " "the xiv-ds8k field prefix, but for details use the driver documentation." msgstr "" #: ../source/newton.rst:441 msgid "" "Deployments doing continuous live upgrades from master branch should not " "upgrade into Ocata before doing an upgrade which includes all the Newton's " "RPC API version bump commits (scheduler, volume). If you're upgrading " "deployment in a release-to-release manner, then you can safely ignore this " "note." msgstr "" #: ../source/newton.rst:445 msgid "" "EMC ScaleIO driver now uses the config option san_thin_provision to " "determine the default provisioning type." msgstr "" #: ../source/newton.rst:449 msgid "" "If using the key manager, the configuration details should be updated to " "reflect the Castellan-specific configuration options." msgstr "" #: ../source/newton.rst:453 msgid "" "use oslo_middleware.sizelimit rather than cinder.api.middleware.sizelimit " "compatibility shim" msgstr "" #: ../source/newton.rst:457 msgid "" "The default interval for polling vCenter tasks in the VMware VMDK driver is " "changed to 2s." msgstr "" #: ../source/newton.rst:465 msgid "" "For EMC VNX backends, please upgrade to use ``cinder.volume.drivers.emc.vnx." "driver.EMCVNXDriver``. Add config option ``storage_protocol = fc`` or " "``storage_protocol = iscsi`` to the driver section to enable the FC or iSCSI " "driver respectively." msgstr "" #: ../source/newton.rst:475 msgid "" "IntOpt ``datera_num_replicas`` is changed to a volume type extra spec option-" "- ``DF:replica_count``" msgstr "" #: ../source/newton.rst:479 msgid "" "BoolOpt ``datera_acl_allow_all`` is changed to a volume type extra spec " "option-- ``DF:acl_allow_all``" msgstr "" #: ../source/newton.rst:483 msgid "" "Configuring Volume Drivers in the DEFAULT config stanza is not going to be " "maintained and will be removed in the next release. All backends should use " "the enabled_backends config option with separate stanza's for each." msgstr "" #: ../source/newton.rst:487 msgid "" "Deprecated the configuration option ``nas_ip``. Use option ``nas_host`` to " "indicate the IP address or hostname of the NAS system." msgstr "" #: ../source/newton.rst:491 msgid "" "The old HNAS drivers configuration paths have been marked for deprecation." msgstr "" #: ../source/newton.rst:495 msgid "" "The XML configuration file used by the HNAS drivers is now deprecated and " "will no longer be used in the future. Please use cinder.conf for all driver " "configuration." msgstr "" #: ../source/newton.rst:499 msgid "" "The Scality driver has been marked as unsupported and is now deprecated. " "enable_unsupported_drivers will need to be set to True in cinder.conf to " "continue to use it. If its support status does not change it will be removed " "in the next release." msgstr "" #: ../source/newton.rst:503 msgid "" "All barbican and keymgr config options in Cinder are now deprecated. All of " "these options are moved to the key_manager section for the Castellan library." "" msgstr "" #: ../source/newton.rst:507 msgid "" "cinder.api.middleware.sizelimit was deprecated in kilo and compatability " "shim added to call into oslo_middleware. Using oslo_middleware.sizelimit " "directly will allow us to remove the compatability shim in a future release." msgstr "" #: ../source/newton.rst:511 msgid "VMware VMDK driver deprecated the support for vCenter version 5.1" msgstr "" #: ../source/newton.rst:515 msgid "" "Old VNX FC (``cinder.volume.drivers.emc.emc_cli_fc.EMCCLIFCDriver``)/ iSCSI " "(``cinder.volume.drivers.emc.emc_cli_iscsi.EMCCLIISCSIDriver``) drivers are " "deprecated. Please refer to upgrade section for information about the new " "driver." msgstr "" #: ../source/newton.rst:539 msgid "" "Added the options ``visibility`` and ``protected`` to the os-" "volume_upload_image REST API call." msgstr "" #: ../source/newton.rst:547 msgid "" "Volumes created on NetApp cDOT and 7mode storage systems now report " "'multiattach' capability. They have always supported such a capability, but " "not reported it to Cinder." msgstr "" #: ../source/newton.rst:551 msgid "" "NetApp cDOT block and file drivers now report replication capability at the " "pool level; and are hence compatible with using the ``replication_enabled`` " "extra-spec in volume types." msgstr "" #: ../source/newton.rst:555 msgid "" "Fixed StorWize/SVC error causing volume deletion to get stuck in the " "'deleting' state when using FlashCopy." msgstr "" #: ../source/newton.rst:559 msgid "" "Fixed issue where the HNAS driver was not correctly reporting THIN " "provisioning and related stats." msgstr "" #: ../source/newton.rst:563 msgid "Fixed live migration on EMC VMAX3 backends." msgstr "" #: ../source/newton.rst:571 msgid "" "Fixed 'No Space left' error by dd command when users set the config option " "``volume_clear_size`` to a value larger than the size of a volume." msgstr "" #: ../source/newton.rst:575 msgid "Fixed backup and restore of volumes in VMware VMDK driver." msgstr "" #: ../source/newton.rst:579 msgid "" "Fixed the VMware VMDK driver to create volume from image in ova container." msgstr "" #: ../source/ocata.rst:3 msgid "Ocata Series Release Notes" msgstr "" #: ../source/ocata.rst:8 msgid "10.0.8-20" msgstr "" #: ../source/ocata.rst:17 ../source/pike.rst:82 ../source/queens.rst:364 #: ../source/rocky.rst:397 msgid "" "When using the RBD pool exclusively for Cinder we can now set " "`rbd_exclusive_cinder_pool` to `true` and Cinder will use DB information to " "calculate provisioned size instead of querying all volumes in the backend, " "which will reduce the load on the Ceph cluster and the volume service." msgstr "" #: ../source/ocata.rst:25 ../source/pike.rst:510 msgid "Generic group is added into quota management." msgstr "" #: ../source/ocata.rst:29 ../source/pike.rst:94 ../source/queens.rst:324 #: ../source/rocky.rst:520 msgid "" "Dell EMC Unity Driver: Adds support for removing empty host. The new option " "named `remove_empty_host` could be configured as `True` to notify Unity " "driver to remove the host after the last LUN is detached from it." msgstr "" #: ../source/ocata.rst:35 ../source/pike.rst:207 ../source/queens.rst:777 msgid "Add support to force detach a volume from all hosts on VNX." msgstr "" #: ../source/ocata.rst:45 ../source/pike.rst:113 ../source/queens.rst:386 #: ../source/rocky.rst:589 msgid "" "If RBD stats collection is taking too long in your environment maybe even " "leading to the service appearing as down you'll want to use the " "`rbd_exclusive_cinder_pool = true` configuration option if you are using the " "pool exclusively for Cinder and maybe even if you are not and can live with " "the innacuracy." msgstr "" #: ../source/ocata.rst:59 ../source/pike.rst:152 ../source/queens.rst:347 msgid "" "Dell EMC Unity: Fixes bug 1775518 to make sure driver succeed to initialize " "even though the value of unity_io_ports and unity_storage_pool_names are " "empty" msgstr "" #: ../source/ocata.rst:65 ../source/pike.rst:246 ../source/queens.rst:415 #: ../source/rocky.rst:818 msgid "" "Dell EMC Unity Driver: Fixes `bug 1759175 `__ to detach the lun correctly when auto zone was enabled and " "the lun was the last one attached to the host." msgstr "" #: ../source/ocata.rst:78 ../source/pike.rst:268 msgid "Corrected support to force detach a volume from all hosts on Unity." msgstr "" #: ../source/ocata.rst:91 msgid "10.0.8" msgstr "" #: ../source/ocata.rst:100 ../source/pike.rst:138 ../source/queens.rst:262 #: ../source/rocky.rst:748 msgid "" "Removed the ability to create volumes in a ScaleIO Storage Pool that has " "zero-padding disabled. A new configuration option " "``sio_allow_non_padded_volumes`` has been added to override this new " "behavior and allow unpadded volumes, but should not be enabled if multiple " "tenants will utilize volumes from a shared Storage Pool." msgstr "" #: ../source/ocata.rst:114 ../source/pike.rst:222 ../source/queens.rst:410 #: ../source/rocky.rst:768 msgid "" "NetApp ONTAP NFS (bug 1690954): Fix wrong usage of export path as volume " "name when deleting volumes and snapshots." msgstr "" #: ../source/ocata.rst:119 ../source/pike.rst:237 ../source/queens.rst:342 #: ../source/rocky.rst:779 msgid "" "NetApp ONTAP (bug 1762424): Fix ONTAP NetApp driver not being able to extend " "a volume to a size greater than the corresponding LUN max geometry." msgstr "" #: ../source/ocata.rst:124 ../source/pike.rst:253 ../source/queens.rst:471 #: ../source/rocky.rst:825 msgid "" "We no longer leave orphaned chunks on the backup backend or leave a " "temporary volume/snapshot when aborting a backup." msgstr "" #: ../source/ocata.rst:129 ../source/pike.rst:264 ../source/queens.rst:1156 msgid "" "NetApp cDOT block and file drivers have improved support for SVM scoped user " "accounts. Features not supported for SVM scoped users include QoS, aggregate " "usage reporting, and dedupe usage reporting." msgstr "" #: ../source/ocata.rst:135 msgid "10.0.7" msgstr "" #: ../source/ocata.rst:144 ../source/pike.rst:283 ../source/queens.rst:581 msgid "" "Kaminario K2 iSCSI driver now supports non discovery multipathing (Nova and " "Cinder won't use iSCSI sendtargets) which can be enabled by setting " "`disable_discovery` to `true` in the configuration." msgstr "" #: ../source/ocata.rst:150 ../source/pike.rst:326 ../source/queens.rst:628 msgid "" "RBD driver supports returning a static total capacity value instead of a " "dynamic value like it's been doing. Configurable with " "`report_dynamic_total_capacity` configuration option." msgstr "" #: ../source/ocata.rst:162 ../source/pike.rst:295 ../source/queens.rst:808 msgid "" "Kaminario K2 now supports networks with duplicated FQDNs via configuration " "option `unique_fqdn_network` so attaching in these networks will work (bug " "#1720147)." msgstr "" #: ../source/ocata.rst:174 ../source/pike.rst:338 ../source/queens.rst:835 msgid "" "If using the NetApp ONTAP drivers (7mode/cmode), the configuration value for " "\"max_over_subscription_ratio\" may need to be increased to avoid scheduling " "problems where storage pools that previously were valid to schedule new " "volumes suddenly appear to be out of space to the Cinder scheduler. See " "documentation `here `_." msgstr "" #: ../source/ocata.rst:178 ../source/pike.rst:342 ../source/queens.rst:909 msgid "" "RBD/Ceph backends should adjust `max_over_subscription_ratio` to take into " "account that the driver is no longer reporting volume's physical usage but " "it's provisioned size." msgstr "" #: ../source/ocata.rst:190 ../source/pike.rst:217 ../source/queens.rst:1095 msgid "" "Fixed bug 1632333 with the NetApp ONTAP Driver. Now the copy offload method " "is invoked early to avoid downloading Glance images twice." msgstr "" #: ../source/ocata.rst:195 ../source/pike.rst:354 ../source/queens.rst:1109 msgid "" "The ONTAP drivers (\"7mode\" and \"cmode\") have been fixed to not report " "consumed space as \"provisioned_capacity_gb\". They instead rely on the " "cinder scheduler's calculation of \"provisioned_capacity_gb\". This fixes " "the oversubscription miscalculations with the ONTAP drivers. This bugfix " "affects all three protocols supported by these drivers (iSCSI/FC/NFS)." msgstr "" #: ../source/ocata.rst:199 ../source/pike.rst:242 ../source/queens.rst:467 #: ../source/rocky.rst:814 msgid "" "Dell EMC SC driver correctly returns initialize_connection data when more " "than one IQN is attached to a volume. This fixes some random Nova Live " "Migration failures where the connection information being returned was for " "an IQN other than the one for which it was being requested." msgstr "" #: ../source/ocata.rst:203 ../source/pike.rst:258 ../source/queens.rst:422 #: ../source/rocky.rst:889 msgid "" "Fixed bug #1731474 on NetApp Data ONTAP driver that was causing LUNs to be " "created with larger size than requested. This fix requires version 9.1 of " "ONTAP or later." msgstr "" #: ../source/ocata.rst:209 ../source/pike.rst:307 ../source/queens.rst:1160 msgid "" "Dell EMC PS Series Driver code was creating duplicate ACL records during " "live migration. Fixes the initialize_connection code to not create access " "record for a host if one exists previously. This change fixes bug 1726591." msgstr "" #: ../source/ocata.rst:213 ../source/pike.rst:311 msgid "" "Dell EMC PS Series Driver was creating unmanaged snapshots when extending " "volumes. Fixed it by adding the missing no-snap parameter. This change fixes " "bug 1720454." msgstr "" #: ../source/ocata.rst:217 ../source/pike.rst:358 ../source/queens.rst:1168 msgid "" "Dell EMC PS Series Driver code reporting volume stats is now optimized to " "return the information earlier and accelerate the process. This change fixes " "bug 1661154." msgstr "" #: ../source/ocata.rst:221 ../source/pike.rst:362 ../source/queens.rst:1172 msgid "" "Dell EMC PS Driver stats report has been fixed, now reports the " "`provisioned_capacity_gb` properly. Fixes bug 1719659." msgstr "" #: ../source/ocata.rst:226 ../source/pike.rst:367 ../source/queens.rst:1181 msgid "" "RBD stats report has been fixed, now properly reports " "`allocated_capacity_gb` and `provisioned_capacity_gb` with the sum of the " "sizes of the volumes (not physical sizes) for volumes created by Cinder and " "all available in the pool respectively. Free capacity will now properly " "handle quota size restrictions of the pool." msgstr "" #: ../source/ocata.rst:236 msgid "10.0.5" msgstr "" #: ../source/ocata.rst:245 ../source/pike.rst:1106 msgid "Prohibit the deletion of group if group snapshot exists." msgstr "" #: ../source/ocata.rst:251 msgid "10.0.4" msgstr "" #: ../source/ocata.rst:260 msgid "" "Add ``all_tenants``, ``project_id`` support in attachment list&detail APIs." msgstr "" #: ../source/ocata.rst:266 msgid "10.0.3" msgstr "" #: ../source/ocata.rst:275 ../source/pike.rst:1131 msgid "" "Fix NFS backup driver, we now support multiple backups on the same " "container, they are no longer overwritten." msgstr "" #: ../source/ocata.rst:282 msgid "10.0.1" msgstr "" #: ../source/ocata.rst:291 ../source/pike.rst:1095 msgid "" "Fixed consistency groups API which was always returning groups scoped to " "project ID from user context instead of given input project ID." msgstr "" #: ../source/ocata.rst:299 msgid "10.0.0" msgstr "" #: ../source/ocata.rst:308 msgid "" "Dell SC - Compression and Dedupe support added for Storage Centers that " "support the options." msgstr "" #: ../source/ocata.rst:312 msgid "" "Dell SC - Volume and Group QOS support added for Storage Centers that " "support and have enabled the option." msgstr "" #: ../source/ocata.rst:316 msgid "Added ability to query backups by project ID." msgstr "" #: ../source/ocata.rst:320 msgid "Add support to configure IO ports option in Dell EMC Unity driver." msgstr "" #: ../source/ocata.rst:324 msgid "Added reset status API to group snapshot." msgstr "" #: ../source/ocata.rst:328 msgid "Added reset status API to generic volume group." msgstr "" #: ../source/ocata.rst:332 msgid "Add v2.1 volume replication support in VMAX driver." msgstr "" #: ../source/ocata.rst:336 msgid "" "The IBM_Storage driver has been open sourced. This means that there is no " "more need to download the package from the IBM site. The only requirement " "remaining is to install pyxcli, which is available through pypi::" msgstr "" #: ../source/ocata.rst:344 msgid "" "Cinder is now collecting capacity data, including virtual free capacity etc " "from the backends. A notification which includes that data is periodically " "emitted." msgstr "" #: ../source/ocata.rst:348 msgid "Added update-host command for consistency groups in cinder-manage." msgstr "" #: ../source/ocata.rst:352 msgid "Added Datera EDF API 2.1 support." msgstr "" #: ../source/ocata.rst:356 msgid "Added Datera Multi-Tenancy Support." msgstr "" #: ../source/ocata.rst:360 msgid "Added Datera Template Support." msgstr "" #: ../source/ocata.rst:364 msgid "Broke Datera driver up into modules." msgstr "" #: ../source/ocata.rst:368 msgid "" "The ``force`` boolean parameter has been added to the volume delete API. It " "may be used in combination with ``cascade``. This also means that volume " "force delete is available in the base volume API rather than only in the " "``volume_admin_actions`` extension." msgstr "" #: ../source/ocata.rst:372 msgid "Added backend driver for Dell EMC Unity storage." msgstr "" #: ../source/ocata.rst:376 msgid "" "Add consistent group capability to generic volume groups in VNX driver." msgstr "" #: ../source/ocata.rst:380 msgid "" "Added new Hitachi VSP FC Driver. The VSP driver supports all Hitachi VSP " "Family and HUSVM." msgstr "" #: ../source/ocata.rst:384 msgid "Adds new Hitachi VSP iSCSI Driver." msgstr "" #: ../source/ocata.rst:388 msgid "" "Hitachi VSP drivers have a new config option ``vsp_compute_target_ports`` to " "specify IDs of the storage ports used to attach volumes to compute nodes. " "The default is the value specified for the existing ``vsp_target_ports`` " "option. Either or both of ``vsp_compute_target_ports`` and " "``vsp_target_ports`` must be specified." msgstr "" #: ../source/ocata.rst:392 msgid "" "Hitachi VSP drivers have a new config option ``vsp_horcm_pair_target_ports`` " "to specify IDs of the storage ports used to copy volumes by Shadow Image or " "Thin Image. The default is the value specified for the existing " "``vsp_target_ports`` option. Either or both of " "``vsp_horcm_pair_target_ports`` and ``vsp_target_ports`` must be specified." msgstr "" #: ../source/ocata.rst:396 msgid "" "Added the ability to list manageable volumes and snapshots to HNAS NFS " "driver." msgstr "" #: ../source/ocata.rst:400 msgid "Optimize backend reporting capabilities for Huawei drivers." msgstr "" #: ../source/ocata.rst:404 msgid "" "Added support for querying group details with volume ids which are in this " "group. For example, \"groups/{group_id}?list_volume=True\"." msgstr "" #: ../source/ocata.rst:408 msgid "Added driver for the InfiniBox storage array." msgstr "" #: ../source/ocata.rst:412 msgid "Added backend FC and iSCSI drivers for NEC Storage." msgstr "" #: ../source/ocata.rst:416 msgid "" "The NetApp cDOT drivers report to the scheduler, for each FlexVol pool, the " "fraction of the shared block limit that has been consumed by dedupe and " "cloning operations. This value, netapp_dedupe_used_percent, may be used in " "the filter & goodness functions for better placement of new Cinder volumes." msgstr "" #: ../source/ocata.rst:420 msgid "Added extend method to NFS driver for NexentaStor 5." msgstr "" #: ../source/ocata.rst:424 msgid "" "Added secure HTTP support for REST API calls in the NexentaStor5 driver. Use " "of HTTPS is set True by default with option ``nexenta_use_https``." msgstr "" #: ../source/ocata.rst:428 msgid "" "Added support for snapshots in the NFS driver. This functionality is only " "enabled if ``nfs_snapshot_support`` is set to ``True`` in cinder.conf. " "Cloning volumes is only supported if the source volume is not attached." msgstr "" #: ../source/ocata.rst:432 msgid "Added Nimble Storage Fibre Channel backend driver." msgstr "" #: ../source/ocata.rst:436 msgid "" "Add Support for QoS in the Nimble Storage driver. QoS is available from " "Nimble OS release 4.x and above." msgstr "" #: ../source/ocata.rst:440 msgid "Add Support for deduplication of volumes in the Nimble Storage driver." msgstr "" #: ../source/ocata.rst:444 msgid "" "The Nimble backend driver has been updated to use REST for array " "communication." msgstr "" #: ../source/ocata.rst:448 msgid "" "Add consistent group capability to generic volume groups in Pure drivers." msgstr "" #: ../source/ocata.rst:452 msgid "Allow the RBD driver to work with max_over_subscription_ratio." msgstr "" #: ../source/ocata.rst:456 msgid "Added v2.1 replication support to RBD driver." msgstr "" #: ../source/ocata.rst:460 msgid "Added backend ISCSI driver for Reduxio." msgstr "" #: ../source/ocata.rst:464 msgid "Add provider_id in the detailed view of a volume for admin." msgstr "" #: ../source/ocata.rst:468 msgid "Added volume driver for QNAP ES Storage Driver." msgstr "" #: ../source/ocata.rst:472 msgid "" "The SolidFire driver will recognize 4 new QoS spec keys to allow an " "administrator to specify QoS settings which are scaled by the size of the " "volume. 'ScaledIOPS' is a flag which will tell the driver to look for " "'scaleMin', 'scaleMax' and 'scaleBurst' which provide the scaling factor " "from the minimum values specified by the previous QoS keys ('minIOPS', " "'maxIOPS', 'burstIOPS'). The administrator must take care to assure that no " "matter what the final calculated QoS values follow minIOPS <= maxIOPS <= " "burstIOPS. A exception will be thrown if not. The QoS settings are also " "checked against the cluster min and max allowed and truncated at the min or " "max if they exceed." msgstr "" #: ../source/ocata.rst:476 msgid "Add multipath enhancement to Storwize iSCSI driver." msgstr "" #: ../source/ocata.rst:480 msgid "" "Added support to querying snapshots filtered by metadata key/value using " "'metadata' optional URL parameter. For example, \"/v3/snapshots?metadata==" "{'key1':'value1'}\"." msgstr "" #: ../source/ocata.rst:484 msgid "Added support for ZMQ messaging layer in multibackend configuration." msgstr "" #: ../source/ocata.rst:488 msgid "Add support to backup volume using snapshot in the Unity driver." msgstr "" #: ../source/ocata.rst:492 msgid "" "Enable backup snapshot optimal path by implementing attach and detach " "snapshot in the VMAX driver." msgstr "" #: ../source/ocata.rst:496 msgid "" "Added the ability to create a CG from a source CG with the VMAX driver." msgstr "" #: ../source/ocata.rst:500 msgid "Support for compression on VMAX All Flash in the VMAX driver." msgstr "" #: ../source/ocata.rst:504 msgid "" "Storage assisted volume migration from one Pool/SLO/Workload combination to " "another, on the same array, via retype, for the VMAX driver. Both All Flash " "and Hybrid VMAX3 arrays are supported. VMAX2 is not supported." msgstr "" #: ../source/ocata.rst:508 msgid "" "VNX cinder driver now supports async migration during volume cloning. By " "default, the cloned volume will be available after the migration starts in " "the VNX instead of waiting for the completion of migration. This greatly " "accelerates the cloning process. If user wants to disable this, he could add " "``--metadata async_migrate=False`` when creating volume from source volume/" "snapshot." msgstr "" #: ../source/ocata.rst:512 msgid "" "Add consistent group capability to generic volume groups in the XtremIO " "driver." msgstr "" #: ../source/ocata.rst:522 msgid "" "With the Dell SC Cinder Driver if a volume is retyped to a new storage " "profile all volumes created via snapshots from this volume will also change " "to the new storage profile." msgstr "" #: ../source/ocata.rst:526 msgid "" "With the Dell SC Cinder Driver retyping from one replication type to another " "type (ex. regular replication to live volume replication) is not supported." msgstr "" #: ../source/ocata.rst:530 msgid "" "Dell SC Cinder driver has limited support in a failed over state so " "thaw_backend has been implemented to reject the thaw call when in such a " "state." msgstr "" #: ../source/ocata.rst:556 msgid "" "Previous installations of IBM Storage must be un-installed first and the new " "driver should be installed on top. In addition the cinder.conf values should " "be updated to reflect the new paths. For example the proxy setting of " "``storage.proxy.IBMStorageProxy`` should be updated to ``cinder.volume." "drivers.ibm.ibm_storage.proxy.IBMStorageProxy``." msgstr "" #: ../source/ocata.rst:564 msgid "Removed deprecated option ``osapi_max_request_body_size``." msgstr "" #: ../source/ocata.rst:568 msgid "" "To get rid of long running DB data migrations that must be run offline, " "Cinder will now be able to execute them online, on a live cloud. Before " "upgrading from Ocata to Pike, operator needs to perform all the Newton data " "migrations. To achieve that he needs to perform ``cinder-manage db " "online_data_migrations`` until there are no records to be updated. To limit " "DB performance impact migrations can be performed in chunks limited by ``--" "max_number`` option. If your intent is to upgrade Cinder in a non-live " "manner, you can use ``--ignore_state`` option safely. Please note that " "finishing all the Newton data migrations will be enforced by the first " "schema migration in Pike, so you won't be able to upgrade to Pike without " "that." msgstr "" #: ../source/ocata.rst:572 msgid "" "Datera driver location has changed from cinder.volume.drivers .datera." "DateraDriver to cinder.volume.drivers.datera.datera_iscsi .DateraDriver." msgstr "" #: ../source/ocata.rst:576 msgid "" "The Cinder database can now only be upgraded from changes since the Liberty " "release. In order to upgrade from a version prior to that, you must now " "upgrade to at least Liberty first, then to Ocata or later." msgstr "" #: ../source/ocata.rst:580 msgid "" "The v1 API was deprecated in the Juno release and is now defaulted to " "disabled. In order to still use the v1 API, you must now set " "``enable_v1_api`` to ``True`` in your cinder.conf file." msgstr "" #: ../source/ocata.rst:584 msgid "" "There is a new policy option ``volume:force_delete`` which controls access " "to the ability to specify force delete via the volume delete API. This is " "separate from the pre-existing ``volume-admin-actions:force_delete`` policy " "check." msgstr "" #: ../source/ocata.rst:588 msgid "" "The Hitachi NAS iSCSI driver has been marked as unsupported and is now " "deprecated. ``enable_unsupported_drivers`` will need to be set to ``True`` " "in cinder.conf to continue to use it." msgstr "" #: ../source/ocata.rst:592 msgid "" "Removed deprecated option ``kaminario_nodedup_substring`` in Kaminario FC " "and iSCSI Cinder drivers." msgstr "" #: ../source/ocata.rst:596 msgid "" "The CloudByte driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_drivers`` will need to be set to ``True`` in cinder." "conf to continue to use it." msgstr "" #: ../source/ocata.rst:600 msgid "" "The DotHill drivers have been marked as unsupported and are now deprecated. " "``enable_unsupported_drivers`` will need to be set to ``True`` in cinder." "conf to continue to use it." msgstr "" #: ../source/ocata.rst:604 msgid "" "The HPE XP driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_drivers`` will need to be set to ``True`` in cinder." "conf to continue to use it." msgstr "" #: ../source/ocata.rst:608 msgid "" "The Nexenta Edge drivers have been marked as unsupported and are now " "deprecated. ``enable_unsupported_drivers`` will need to be set to ``True`` " "in cinder.conf to continue to use it." msgstr "" #: ../source/ocata.rst:612 msgid "" "Operator needs to perform ``cinder-manage db online_data_migrations`` to " "migrate existing consistency groups to generic volume groups." msgstr "" #: ../source/ocata.rst:616 msgid "" "The EqualLogic driver is moved to the dell_emc directory and has been " "rebranded to its current Dell EMC PS Series name. The volume_driver entry in " "cinder.conf needs to be changed to ``cinder.volume.drivers.dell_emc.ps." "PSSeriesISCSIDriver``." msgstr "" #: ../source/ocata.rst:620 msgid "" "The ScaleIO driver is moved to the dell_emc directory. volume_driver entry " "in cinder.conf needs to be changed to ``cinder.volume.drivers.dell_emc." "scaleio.driver.ScaleIODriver``." msgstr "" #: ../source/ocata.rst:624 msgid "" "The XtremIO driver is moved to the dell_emc directory. volume_driver entry " "in cinder.conf needs to be changed to ``cinder.volume.drivers.dell_emc." "xtremio.XtremIOISCSIDriver`` or ``cinder.volume.drivers.dell_emc.xtremio." "XtremIOFCDriver``." msgstr "" #: ../source/ocata.rst:628 msgid "" "New config option added. ``\"connection_string\"`` in [profiler] section is " "used to specify OSProfiler driver connection string, for example, " "``\"connection_string = messaging://\"``, ``\"connection_string = mongodb://" "localhost:27017\"``" msgstr "" #: ../source/ocata.rst:632 msgid "" "After running the migration script to migrate CGs to generic volume groups, " "CG and group APIs work as follows." msgstr "" #: ../source/ocata.rst:635 msgid "Create CG only creates in the groups table." msgstr "" #: ../source/ocata.rst:636 msgid "" "Modify CG modifies in the CG table if the CG is in the CG table, otherwise " "it modifies in the groups table." msgstr "" #: ../source/ocata.rst:638 msgid "" "Delete CG deletes from the CG or the groups table depending on where the CG " "is." msgstr "" #: ../source/ocata.rst:640 msgid "List CG checks both CG and groups tables." msgstr "" #: ../source/ocata.rst:641 msgid "List CG Snapshots checks both the CG and the groups tables." msgstr "" #: ../source/ocata.rst:643 msgid "Show CG checks both tables." msgstr "" #: ../source/ocata.rst:644 msgid "Show CG Snapshot checks both tables." msgstr "" #: ../source/ocata.rst:645 msgid "" "Create CG Snapshot creates either in the CG or the groups table depending on " "where the CG is." msgstr "" #: ../source/ocata.rst:647 msgid "" "Create CG from Source creates in either the CG or the groups table depending " "on the source." msgstr "" #: ../source/ocata.rst:649 msgid "Create Volume adds the volume either to the CG or the group." msgstr "" #: ../source/ocata.rst:651 msgid "default_cgsnapshot_type is reserved for migrating CGs." msgstr "" #: ../source/ocata.rst:652 msgid "Group APIs will only write/read in/from the groups table." msgstr "" #: ../source/ocata.rst:653 msgid "Group APIs will not work on groups with default_cgsnapshot_type." msgstr "" #: ../source/ocata.rst:654 msgid "Groups with default_cgsnapshot_type can only be operated by CG APIs." msgstr "" #: ../source/ocata.rst:656 msgid "" "After CG tables are removed, we will allow default_cgsnapshot_type to be " "used by group APIs." msgstr "" #: ../source/ocata.rst:661 msgid "" "EMC VNX driver have been rebranded to Dell EMC VNX driver. Existing " "configurations will continue to work with the legacy name, but will need to " "be updated by the next release. User needs update ``volume_driver`` to " "``cinder.volume.drivers.dell_emc.vnx.driver.VNXDriver``." msgstr "" #: ../source/ocata.rst:665 msgid "" "Old driver paths have been removed since they have been through our alloted " "deprecation period. Make sure if you have any of these paths being set in " "your cinder.conf for the volume_driver option, to update to the new driver " "path listed here." msgstr "" #: ../source/ocata.rst:670 msgid "" "Old path - cinder.volume.drivers.huawei.huawei_18000.Huawei18000ISCSIDriver" msgstr "" #: ../source/ocata.rst:671 ../source/ocata.rst:673 msgid "" "New path - cinder.volume.drivers.huawei.huawei_driver.HuaweiISCSIDriver" msgstr "" #: ../source/ocata.rst:672 msgid "" "Old path - cinder.volume.drivers.huawei.huawei_driver.Huawei18000ISCSIDriver" msgstr "" #: ../source/ocata.rst:674 msgid "" "Old path - cinder.volume.drivers.huawei.huawei_18000.Huawei18000FCDriver" msgstr "" #: ../source/ocata.rst:675 ../source/ocata.rst:677 msgid "New path - cinder.volume.drivers.huawei.huawei_driver.HuaweiFCDriver" msgstr "" #: ../source/ocata.rst:676 msgid "" "Old path - cinder.volume.drivers.huawei.huawei_driver.Huawei18000FCDriver" msgstr "" #: ../source/ocata.rst:678 msgid "Old path - cinder.volume.drivers.san.hp.hp_3par_fc.HP3PARFCDriver" msgstr "" #: ../source/ocata.rst:679 msgid "New path - cinder.volume.drivers.hpe.hpe_3par_fc.HPE3PARFCDriver" msgstr "" #: ../source/ocata.rst:680 msgid "" "Old path - cinder.volume.drivers.san.hp.hp_3par_iscsi.HP3PARISCSIDriver" msgstr "" #: ../source/ocata.rst:681 msgid "New path - cinder.volume.drivers.hpe.hpe_3par_iscsi.HPE3PARISCSIDriver" msgstr "" #: ../source/ocata.rst:682 msgid "" "Old path - cinder.volume.drivers.san.hp.hp_lefthand_iscsi." "HPLeftHandISCSIDriver" msgstr "" #: ../source/ocata.rst:683 msgid "" "New path - cinder.volume.drivers.hpe.hpe_lefthand_iscsi." "HPELeftHandISCSIDriver" msgstr "" #: ../source/ocata.rst:684 msgid "Old path - cinder.volume.drivers.san.hp.hp_xp_fc.HPXPFCDriver" msgstr "" #: ../source/ocata.rst:685 msgid "New path - cinder.volume.drivers.hpe.hpe_xp_fc.HPEXPFCDriver" msgstr "" #: ../source/ocata.rst:690 msgid "" "Removing the Dell EqualLogic driver's deprecated configuration options. " "Please replace old options in your cinder.conf with the new one." msgstr "" #: ../source/ocata.rst:693 msgid "Removed - ``eqlx_cli_timeout``" msgstr "" #: ../source/ocata.rst:694 msgid "Replaced with - ``ssh_conn_timeout``" msgstr "" #: ../source/ocata.rst:695 msgid "Removed - ``eqlx_use_chap``" msgstr "" #: ../source/ocata.rst:696 msgid "Replaced with - ``use_chap_auth``" msgstr "" #: ../source/ocata.rst:697 msgid "Removed - ``eqlx_chap_login``" msgstr "" #: ../source/ocata.rst:698 msgid "Replaced with - ``chap_username``" msgstr "" #: ../source/ocata.rst:699 msgid "Removed - ``eqlx_chap_password``" msgstr "" #: ../source/ocata.rst:700 msgid "Replaced with - ``chap_password``" msgstr "" #: ../source/ocata.rst:704 msgid "" "The Scality backend volume driver was marked as not supported in the " "previous release and has now been removed." msgstr "" #: ../source/ocata.rst:708 msgid "" "Configurations that are setting backend config in ``[DEFAULT]`` section are " "now not supported. You should use ``enabled_backends`` option to set up " "backends." msgstr "" #: ../source/ocata.rst:712 msgid "" "The volume_clear option to use `shred` was deprecated in the Newton release " "and has now been removed. Since deprecation, this option has performed the " "same action as the `zero` option. Config settings for `shred` should be " "updated to be set to `zero` for continued operation." msgstr "" #: ../source/ocata.rst:716 msgid "" "The GlusterFS volume driver, which was deprecated in the Newton release, has " "been removed." msgstr "" #: ../source/ocata.rst:720 msgid "" "The RBD driver no longer uses the \"volume_tmp_dir\" option to set where " "temporary files for image conversion are stored. Set " "\"image_conversion_dir\" to configure this in Ocata." msgstr "" #: ../source/ocata.rst:724 msgid "" "Removing cinder-all binary. Instead use the individual binaries like cinder-" "api, cinder-backup, cinder-volume, cinder-scheduler." msgstr "" #: ../source/ocata.rst:728 msgid "" "The VMAX driver is moved to the dell_emc directory. volume_driver entry in " "cinder.conf needs to be changed to ``cinder.volume.drivers.dell_emc.vmax." "iscsi.VMAXISCSIDriver`` or ``cinder.volume.drivers.dell_emc.vmax.fc." "VMAXFCDriver``." msgstr "" #: ../source/ocata.rst:732 msgid "" "Added config option ``vmware_connection_pool_size`` in the VMware VMDK " "driver to specify the maximum number of connections (to vCenter) in the http " "connection pool." msgstr "" #: ../source/ocata.rst:736 msgid "" "In VNX Cinder driver, ``replication_device`` keys, ``backend_id`` and " "``san_ip`` are mandatory now. If you prefer security file authentication, " "please append ``storage_vnx_security_file_dir`` in ``replication_device``, " "otherwise, append ``san_login``, ``san_password``, " "``storage_vnx_authentication_type`` in ``replication_device``." msgstr "" #: ../source/ocata.rst:746 msgid "Deprecated datera_api_version option." msgstr "" #: ../source/ocata.rst:750 msgid "Removed datera_acl_allow_all option." msgstr "" #: ../source/ocata.rst:754 msgid "Removed datera_num_replicas option." msgstr "" #: ../source/ocata.rst:758 msgid "" "The block_driver is deprecated as of the Ocata release and will be removed " "in the Queens release of Cinder. Instead the LVM driver with the LIO iSCSI " "target should be used. For those that desire higher performance, they " "should use LVM striping." msgstr "" #: ../source/ocata.rst:762 msgid "" "The Cinder Linux SMBFS driver is now deprecated and will be removed during " "the following release. Deployers are encouraged to use the Windows SMBFS " "driver instead." msgstr "" #: ../source/ocata.rst:768 msgid "" "The HBSD (Hitachi Block Storage Driver) volume drivers which supports " "Hitachi Storages HUS100 and VSP family are deprecated. Support for HUS110 " "family will be no longer provided. Support on VSP will be provided as " "hitachi.vsp_* drivers." msgstr "" #: ../source/ocata.rst:772 msgid "" "Support for snapshots named in the backend as ``snapshot-`` is " "deprecated. Snapshots are now named in the backend as ``." "``." msgstr "" #: ../source/ocata.rst:776 msgid "" "The Hitachi NAS iSCSI driver has been marked as unsupported and is now " "deprecated. ``enable_unsupported_drivers`` will need to be set to ``True`` " "in cinder.conf to continue to use it. The driver will be removed in the next " "release." msgstr "" #: ../source/ocata.rst:780 msgid "" "Deprecated the configuration option ``hnas_svcX_volume_type``. Use option " "``hnas_svcX_pool_name`` to indicate the name of the services (pools)." msgstr "" #: ../source/ocata.rst:784 msgid "" "The CloudByte driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_drivers`` will need to be set to ``True`` in cinder." "conf to continue to use it. If its support status does not change it will be " "removed in the next release." msgstr "" #: ../source/ocata.rst:788 msgid "" "The DotHill drivers has been marked as unsupported and are now deprecated. " "``enable_unsupported_drivers`` will need to be set to ``True`` in cinder." "conf to continue to use it. If its support status does not change it will be " "removed in the next release." msgstr "" #: ../source/ocata.rst:792 msgid "" "The HPE XP driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_drivers`` will need to be set to ``True`` in cinder." "conf to continue to use it. If its support status does not change it will be " "removed in the next release." msgstr "" #: ../source/ocata.rst:796 msgid "" "The Nexenta Edge drivers has been marked as unsupported and are now " "deprecated. ``enable_unsupported_drivers`` will need to be set to ``True`` " "in cinder.conf to continue to use it. If its support status does not change " "it will be removed in the next release." msgstr "" #: ../source/ocata.rst:800 msgid "" "The 7-Mode Data ONTAP configuration of the NetApp Unified driver is " "deprecated as of the Ocata release and will be removed in the Queens release." " Other configurations of the NetApp Unified driver, including Clustered Data " "ONTAP and E-series, are unaffected." msgstr "" #: ../source/ocata.rst:804 msgid "" "Marked the ITRI DISCO driver option ``disco_wsdl_path`` as deprecated. The " "new preferred protocol for array communication is REST and SOAP support will " "be removed." msgstr "" #: ../source/ocata.rst:824 msgid "" "With the Dell SC Cinder Driver retyping to or from a replicated type should " "now work." msgstr "" #: ../source/ocata.rst:828 msgid "" "With the Dell SC Cinder Driver retype failed to return a tuple if it had to " "return an update to the volume state." msgstr "" #: ../source/ocata.rst:840 msgid "" "Fixed volume extend issue that allowed a tenant with enough quota to extend " "the volume to limits greater than what the volume backend supported." msgstr "" #: ../source/ocata.rst:844 msgid "" "Fixed HNAS bug that placed a cloned volume in the same pool as its source, " "even if the clone had a different pool specification. Driver will not allow " "to make clones using a different volume type anymore." msgstr "" #: ../source/ocata.rst:848 msgid "Fixed Non-WAN port filter issue in Kaminario iSCSI driver." msgstr "" #: ../source/ocata.rst:856 msgid "" "For SolidFire, QoS specs are now checked to make sure they fall within the " "min and max constraints. If not the QoS specs are capped at the min or max " "(i.e. if spec says 50 and minimum supported is 100, the driver will set it " "to 100)." msgstr "" #: ../source/ocata.rst:866 msgid "" "Now extend won't work on disabled services because it's going through the " "scheduler, unlike how it worked before." msgstr "" #: ../source/pike.rst:3 msgid "Pike Series Release Notes" msgstr "" #: ../source/pike.rst:8 msgid "11.2.2-15" msgstr "" #: ../source/pike.rst:33 msgid "11.2.2" msgstr "" #: ../source/pike.rst:51 msgid "11.2.1" msgstr "" #: ../source/pike.rst:60 ../source/queens.rst:476 ../source/rocky.rst:830 msgid "" "Resolve issue with cross AZ migrations and retypes where the destination " "volume kept the source volume's AZ, so we ended up with a volume where the " "AZ does not match the backend. (bug 1747949)" msgstr "" #: ../source/pike.rst:68 msgid "11.2.0" msgstr "" #: ../source/pike.rst:77 ../source/queens.rst:562 msgid "" "The Quobyte Cinder driver now supports identifying Quobyte mounts via the " "mounts fstype field." msgstr "" #: ../source/pike.rst:90 ../source/queens.rst:376 ../source/rocky.rst:510 msgid "" "Dell EMC Unity Cinder driver allows enabling/disabling the SSL verification. " "Admin can set `True` or `False` for `driver_ssl_cert_verify` to enable or " "disable this function, alternatively set the `driver_ssl_cert_path=` " "for customized CA path. Both above 2 options should go under the driver " "section." msgstr "" #: ../source/pike.rst:100 ../source/queens.rst:753 msgid "" "VMware VMDK driver now supports vSphere template as a volume snapshot format " "in vCenter server. The snapshot format in vCenter server can be specified " "using driver config option ``vmware_snapshot_format``." msgstr "" #: ../source/pike.rst:127 ../source/queens.rst:1008 msgid "" "VMware VMDK driver will use vSphere template as the default snapshot format " "in vCenter server." msgstr "" #: ../source/pike.rst:164 ../source/queens.rst:209 ../source/rocky.rst:842 msgid "Cinder will now consume quota when importing new backup resource." msgstr "" #: ../source/pike.rst:176 ../source/queens.rst:280 ../source/rocky.rst:846 msgid "" "Fix a quota usage error triggered by a non-admin user backing up an in-use " "volume. The forced backup uses a temporary volume, and quota usage was " "incorrectly updated when the temporary volume was deleted after the backup " "operation completed. Fixes `bug 1778774 `__." msgstr "" #: ../source/pike.rst:184 ../source/queens.rst:297 ../source/rocky.rst:884 msgid "" "Fixed bug #1783582, where calls to os-force_detach were failing on NetApp " "ONTAP iSCSI/FC drivers." msgstr "" #: ../source/pike.rst:189 ../source/queens.rst:306 ../source/rocky.rst:929 msgid "" "Dell EMC Unity Driver: Fixes `bug 1773305 `__ to return the targets which connect to the logged-out " "initiators. Then the zone manager could clean up the FC zone based on the " "correct target wwns." msgstr "" #: ../source/pike.rst:198 msgid "11.1.1" msgstr "" #: ../source/pike.rst:227 ../source/queens.rst:336 ../source/rocky.rst:773 msgid "" "NetApp ONTAP iSCSI (bug 1712651): Fix ONTAP NetApp iSCSI driver not raising " "a proper exception when trying to extend an attached volume beyond its max " "geometry." msgstr "" #: ../source/pike.rst:233 msgid "" "NetApp E-series (bug 1718739):The NetApp E-series driver has been fixed to " "correctly report the \"provisioned_capacity_gb\". Now it sums the capacity " "of all the volumes in the configured backend to get the correct value. This " "bug fix affects all the protocols supported by the driver (FC and iSCSI)." msgstr "" #: ../source/pike.rst:274 msgid "11.0.2" msgstr "" #: ../source/pike.rst:317 msgid "11.0.1" msgstr "" #: ../source/pike.rst:377 msgid "11.0.0" msgstr "" #: ../source/pike.rst:386 msgid "" "Drivers supporting consistent group snapshot in generic volume groups " "reports \"consistent_group_snapshot_enabled = True\" instead of " "\"consistencygroup_support = True\". As a result, a spec such as " "\"consistencygroup_support: ' True'\" in either group type or volume " "type will cause the scheduler not to choose the backend that does not report " "\"consistencygroup_support = True\". In order to create a generic volume " "group that supports consistent group snapshot, " "\"consistent_group_snapshot_enable: ' True'\" should be set in the group " "type specs and volume type extra specs, and \"consistencygroup_support: " "' True'\" should not be set in group type spec and volume type extra " "specs." msgstr "" #: ../source/pike.rst:397 msgid "" "HPE 3PAR driver adds following functionalities Creating thin/dedup " "compresssed volume. Retype for tpvv/tdvv volumes to be compressed. Migration " "of compressed volumes. Create compressed volume from compressed volume/" "snapshot source. Compression support to create cg from source." msgstr "" #: ../source/pike.rst:401 msgid "" "Added consistency group capability to generic volume groups in the HPE 3PAR " "driver." msgstr "" #: ../source/pike.rst:405 msgid "" "Add consistent group capability to generic volume groups in Lefthand driver." msgstr "" #: ../source/pike.rst:409 msgid "" "Add consistent group capability to generic volume groups in the SolidFire " "driver." msgstr "" #: ../source/pike.rst:413 msgid "Added attribute ``connection_info`` to attachment object." msgstr "" #: ../source/pike.rst:417 msgid "Add filters support to get_pools API v3.28." msgstr "" #: ../source/pike.rst:421 msgid "Added like operator support to filters for the following resources::" msgstr "" #: ../source/pike.rst:433 msgid "" "Added periodic task to clean expired messages in cinder scheduler, also " "added a configuration option ``message_reap_interval`` to handle the " "interval." msgstr "" #: ../source/pike.rst:437 msgid "" "Added ``resource_filters`` API to retrieve configured resource filters." msgstr "" #: ../source/pike.rst:441 msgid "Add revert to snapshot API and support in LVM driver." msgstr "" #: ../source/pike.rst:445 msgid "Add ``volume-type`` filter to API Get-Pools" msgstr "" #: ../source/pike.rst:449 msgid "" "Added RBD keyring configuration parameter ``rbd_keyring_conf`` to define " "custom path of Ceph keyring file." msgstr "" #: ../source/pike.rst:454 msgid "" "Allow users to specify the copy speed while using Huawei driver to create " "volume from snapshot or clone volume, by the new added metadata 'copyspeed'. " "For example, user can add --metadata copyspeed=1 when creating volume from " "source volume/snapshot. The valid optional range of copyspeed is [1, 2, 3, " "4], respectively representing LOW, MEDIUM, HIGH and HIGHEST." msgstr "" #: ../source/pike.rst:458 msgid "" "Added new BoolOpt ``backup_ceph_image_journals`` for enabling the Ceph image " "features required to support RBD mirroring of Cinder backup pool." msgstr "" #: ../source/pike.rst:462 msgid "Add ``user_id`` field to snapshot list/detail and snapshot show." msgstr "" #: ../source/pike.rst:466 msgid "" "Add consistent group capability to generic volume groups in CoprHD driver." msgstr "" #: ../source/pike.rst:470 msgid "Added ``datera_disable_profiler`` boolean config option." msgstr "" #: ../source/pike.rst:474 msgid "Added Cinder fast-retype support to Datera EDF driver." msgstr "" #: ../source/pike.rst:478 msgid "Added Volume Placement extra-specs support to Datera EDF driver." msgstr "" #: ../source/pike.rst:482 msgid "Fixed ACL multi-attach bug in Datera EDF driver." msgstr "" #: ../source/pike.rst:486 msgid "Fixed a few scalability bugs in the Datera EDF driver." msgstr "" #: ../source/pike.rst:490 msgid "" "Add consistency group capability to Generic Volume Groups in the Dell EMC SC " "driver." msgstr "" #: ../source/pike.rst:494 msgid "Add replication consistency group support in DS8K cinder driver." msgstr "" #: ../source/pike.rst:498 msgid "" "DS8K driver adds two new properties into extra-specs so that user can " "specify pool or lss or both of them to allocate volume in their expected " "area." msgstr "" #: ../source/pike.rst:502 msgid "" "Added ability to specify multiple storage pools in the FalconStor driver." msgstr "" #: ../source/pike.rst:506 msgid "" "Added generalized resource filter support in ``list volume``, ``list " "backup``, ``list snapshot``, ``list group``, ``list group-snapshot``, ``list " "attachment``, ``list message`` and ``list pools`` APIs." msgstr "" #: ../source/pike.rst:514 msgid "" "Added consistent group capability to generic volume groups in GPFS driver." msgstr "" #: ../source/pike.rst:518 msgid "Add CG capability to generic volume groups in Huawei driver." msgstr "" #: ../source/pike.rst:522 msgid "Add mirrored volume support in IBM SVC/Storwize driver." msgstr "" #: ../source/pike.rst:526 msgid "" "In IBM Storwize_SVC driver, user could specify only one IO group per backend " "definition. The user now may specify a comma separated list of IO groups, " "and at the time of creating the volume, the driver will select an IO group " "which has the least number of volumes associated with it. The change is " "backward compatible, meaning single value is still supported." msgstr "" #: ../source/pike.rst:535 msgid "" "Added support for volume compression in INFINIDAT driver. Compression is " "available on InfiniBox 3.0 onward. To enable volume compression, set " "``infinidat_use_compression`` to True in the backend section in the Cinder " "configuration file." msgstr "" #: ../source/pike.rst:539 msgid "Add CG capability to generic volume groups in INFINIDAT driver." msgstr "" #: ../source/pike.rst:543 msgid "Support for iSCSI in INFINIDAT InfiniBox driver." msgstr "" #: ../source/pike.rst:547 msgid "" "Added support for QoS in the INFINIDAT InfiniBox driver. QoS is available on " "InfiniBox 4.0 onward." msgstr "" #: ../source/pike.rst:551 msgid "" "Added support for get all distinct volumes' metadata from volume-summary API." "" msgstr "" #: ../source/pike.rst:555 msgid "" "Enable backup snapshot optimal path by implementing attach and detach " "snapshot in the NEC driver." msgstr "" #: ../source/pike.rst:559 msgid "" "Added generic volume group capability to NetApp cDot drivers with support " "for write consistent group snapshots." msgstr "" #: ../source/pike.rst:563 msgid "" "a [nova] section is added to configure the connection to the compute " "service, which is needed to the InstanceLocalityFilter, for example." msgstr "" #: ../source/pike.rst:567 msgid "" "Availability zones may now be configured per backend in a multi-backend " "configuration. Individual backend sections can now set the configuration " "option ``backend_availability_zone``. If set, this value will override the " "[DEFAULT] ``storage_availability_zone`` setting." msgstr "" #: ../source/pike.rst:574 msgid "" "Added periodic task to clean expired reservation in cinder scheduler. Added " "a configuration option ``reservation_clean_interval`` to handle the interval." "" msgstr "" #: ../source/pike.rst:578 msgid "" "Added consistent group capability to generic volume groups in ProphetStor " "driver." msgstr "" #: ../source/pike.rst:582 msgid "Allow rbd driver to manage existing snapshot." msgstr "" #: ../source/pike.rst:586 msgid "" "Introduced replication group support and added group action APIs " "enable_replication, disable_replication, failover_replication and " "list_replication_targets." msgstr "" #: ../source/pike.rst:592 msgid "" "Added consistency group support to generic volume groups in ScaleIO Driver." msgstr "" #: ../source/pike.rst:596 msgid "Added ability to list all manageable volumes within ScaleIO Driver." msgstr "" #: ../source/pike.rst:600 msgid "" "Added new APIs on microversion 3.32 to support dynamically changing log " "levels in Cinder services without restart as well as retrieving current log " "levels, which is an easy way to ping via the message broker a service." msgstr "" #: ../source/pike.rst:606 msgid "" "New config format to allow for using shared Volume Driver configuration " "defaults via the [backend_defaults] stanza. Config options defined there " "will be used as defaults for each backend enabled via enabled_backends." msgstr "" #: ../source/pike.rst:610 msgid "" "The SMBFS driver now exposes share information to the scheduler via pools. " "The pool names are configurable, defaulting to the share names." msgstr "" #: ../source/pike.rst:615 msgid "" "Add consistency group capability to generic volume groups in Storwize " "drivers." msgstr "" #: ../source/pike.rst:619 msgid "" "Add global mirror with change volumes(gmcv) support and user can manage gmcv " "replication volume by SVC driver. An example to set a gmcv replication " "volume type, set property replication_type as \" gmcv\", property " "replication_enabled as \" True\" and set property drivers:" "cycle_period_seconds as 500." msgstr "" #: ../source/pike.rst:623 msgid "" "Add ability to extend ``in-use`` volume. User should be aware of the whole " "environment before using this feature because it's dependent on several " "external factors below:" msgstr "" #: ../source/pike.rst:627 msgid "nova-compute version - needs to be the latest for Pike." msgstr "" #: ../source/pike.rst:628 msgid "only the libvirt compute driver supports this currently." msgstr "" #: ../source/pike.rst:629 msgid "" "only iscsi and fibre channel volume types are supported on the nova side " "currently." msgstr "" #: ../source/pike.rst:631 msgid "" "Administrator can disable this ability by updating the ``volume:" "extend_attached_volume`` policy rule." msgstr "" #: ../source/pike.rst:636 msgid "" "Added metadata support for backup source. Now users can create/update " "metadata for a specified backup." msgstr "" #: ../source/pike.rst:640 msgid "Supported ``project_id`` admin filters to limits API." msgstr "" #: ../source/pike.rst:644 msgid "Add support for sorting backups by \"name\"." msgstr "" #: ../source/pike.rst:648 msgid "Support to sort snapshots with \"name\"." msgstr "" #: ../source/pike.rst:652 msgid "" "Add thin clone support in the Unity driver. Unity storage supports the thin " "clone of a LUN from OE version 4.2.0. It is more efficient than the dd " "solution. However, there is a limit of thin clone inside each LUN family. " "Every time the limit reaches, a new LUN family will be created by a dd-copy, " "and then the volume clone afterward will use the thin clone of the new LUN " "family." msgstr "" #: ../source/pike.rst:656 msgid "" "The cinder-manage online_data_migrations command now prints a tabular " "summary of completed and remaining records. The goal here is to get all your " "numbers to zero. The previous execution return code behavior is retained for " "scripting." msgstr "" #: ../source/pike.rst:660 msgid "Added NFS based driver for Veritas Access." msgstr "" #: ../source/pike.rst:664 msgid "" "Add consistent group snapshot support to generic volume groups in VMAX " "driver version 3.0." msgstr "" #: ../source/pike.rst:669 msgid "" "VMAX driver version 3.0, replacing SMI-S with Unisphere REST. This driver " "supports VMAX3 hybrid and All Flash arrays." msgstr "" #: ../source/pike.rst:674 msgid "Adding compression functionality to VMAX driver version 3.0." msgstr "" #: ../source/pike.rst:678 msgid "Adding Live Migration functionality to VMAX driver version 3.0." msgstr "" #: ../source/pike.rst:682 msgid "Adding Qos functionality to VMAX driver version 3.0." msgstr "" #: ../source/pike.rst:686 msgid "Adding Replication V2.1 functionality to VMAX driver version 3.0." msgstr "" #: ../source/pike.rst:690 msgid "Add retype functionality to VMAX driver version 3.0." msgstr "" #: ../source/pike.rst:694 msgid "" "VMware VMDK driver now supports volume type extra-spec option ``vmware:" "adapter_type`` to specify the adapter type of volumes in vCenter server." msgstr "" #: ../source/pike.rst:700 msgid "" "Added config option ``vmware_adapter_type`` for the VMware VMDK driver to " "specify the default adapter type for volumes in vCenter server." msgstr "" #: ../source/pike.rst:704 msgid "Adds QoS support for VNX Cinder driver." msgstr "" #: ../source/pike.rst:708 msgid "Add consistent replication group support in VNX cinder driver." msgstr "" #: ../source/pike.rst:712 msgid "Added volume backend driver for Veritas HyperScale storage." msgstr "" #: ../source/pike.rst:716 msgid "" "The Windows iSCSI driver now returns multiple portals when available and " "multipath is requested." msgstr "" #: ../source/pike.rst:721 msgid "" "Add consistent group capability to generic volume groups in XIV, Spectrum " "Accelerate and A9000/R storage systems." msgstr "" #: ../source/pike.rst:725 msgid "" "Added independent and shared types for qos classes in XIV & A9000. Shared " "type enables to share bandwidth and IO rates between volumes of the same " "class. Independent type gives each volume the same bandwidth and IO rates " "without being affected by other volumes in the same qos class." msgstr "" #: ../source/pike.rst:729 msgid "Add consistency group replication support in XIV\\A9000 Cinder driver." msgstr "" #: ../source/pike.rst:739 msgid "" "The Cinder database can now only be upgraded from changes since the Mitaka " "release. In order to upgrade from a version prior to that, you must now " "upgrade to at least Mitaka first, then to Pike or later." msgstr "" #: ../source/pike.rst:743 msgid "" "Some of DISCO driver options were incorrectly read from ``[DEFAULT]`` " "section in the cinder.conf. Now those are correctly read from " "``[]`` section. This includes following options:" msgstr "" #: ../source/pike.rst:747 msgid "``disco_client``" msgstr "" #: ../source/pike.rst:748 msgid "``disco_client_port``" msgstr "" #: ../source/pike.rst:749 msgid "``rest_ip``" msgstr "" #: ../source/pike.rst:750 msgid "``choice_client``" msgstr "" #: ../source/pike.rst:751 msgid "``disco_src_api_port``" msgstr "" #: ../source/pike.rst:752 msgid "``retry_interval``" msgstr "" #: ../source/pike.rst:754 msgid "" "Also some options are renamed (note that 3 of them were both moved and " "renamed):" msgstr "" #: ../source/pike.rst:757 msgid "``rest_ip`` to ``disco_rest_ip``" msgstr "" #: ../source/pike.rst:758 msgid "``choice_client`` to ``disco_choice_client``" msgstr "" #: ../source/pike.rst:759 msgid "``volume_name_prefix`` to ``disco_volume_name_prefix``" msgstr "" #: ../source/pike.rst:760 msgid "``snapshot_check_timeout`` to ``disco_snapshot_check_timeout``" msgstr "" #: ../source/pike.rst:761 msgid "``restore_check_timeout`` to ``disco_restore_check_timeout``" msgstr "" #: ../source/pike.rst:762 msgid "``clone_check_timeout`` to ``disco_clone_check_timeout``" msgstr "" #: ../source/pike.rst:763 msgid "``retry_interval`` to ``disco_retry_interval``" msgstr "" #: ../source/pike.rst:765 msgid "" "Old names and locations are still supported but support will be removed in " "the future." msgstr "" #: ../source/pike.rst:770 msgid "Support for Dot Hill AssuredSAN arrays has been removed." msgstr "" #: ../source/pike.rst:774 msgid "" "The Hitachi NAS Platform iSCSI driver was marked as not supported in the " "Ocata realease and has now been removed." msgstr "" #: ../source/pike.rst:778 msgid "" "INFINIDAT volume driver now requires the 'infinisdk' python module to be " "installed." msgstr "" #: ../source/pike.rst:782 msgid "" "The Blockbridge driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_drivers`` will need to be set to ``True`` in cinder." "conf to continue to use it." msgstr "" #: ../source/pike.rst:788 msgid "" "The Coho driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it." msgstr "" #: ../source/pike.rst:795 msgid "" "The Falconstor drivers have been marked as unsupported and are now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use it." msgstr "" #: ../source/pike.rst:802 msgid "" "The Infortrend drivers have been marked as unsupported and are now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use them." msgstr "" #: ../source/pike.rst:815 msgid "" "The Reduxio driver has been marked unsupported and is now deprecated. " "``use_unsupported_driver`` will need to be set to ``True`` in the driver's " "section in cinder.conf to use it." msgstr "" #: ../source/pike.rst:821 msgid "" "The Synology driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in ``cinder.conf`` to continue to use it." msgstr "" #: ../source/pike.rst:828 msgid "" "The Tegile driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it." msgstr "" #: ../source/pike.rst:835 msgid "" "The Violin drivers have been marked as unsupported and are now deprecated. " "``enable_unsupported_drivers`` will need to be set to ``True`` in cinder." "conf to continue to use them." msgstr "" #: ../source/pike.rst:841 msgid "" "The X-IO driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it." msgstr "" #: ../source/pike.rst:848 msgid "" "The ZTE driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it." msgstr "" #: ../source/pike.rst:855 ../source/queens.rst:888 msgid "" "The default value for pure_replica_interval_default used by Pure Storage " "volume drivers has changed from 900 to 3600 seconds." msgstr "" #: ../source/pike.rst:859 msgid "" "The ``service`` filter for service list API was deprecated 3 years ago in " "2013 July (Havana). Removed this filter and please use \"binary\" instead." msgstr "" #: ../source/pike.rst:863 msgid "" "Removing deprecated file cinder.middleware.sizelimit. In your api-paste.ini, " "replace cinder.middleware.sizelimit:RequestBodySizeLimiter.factory with " "oslo_middleware.sizelimit:RequestBodySizeLimiter.factory" msgstr "" #: ../source/pike.rst:867 msgid "The \"backing-up\" status is added to snapshot's status matrix." msgstr "" #: ../source/pike.rst:871 msgid "" "The coordination system used by Cinder has been simplified to leverage tooz " "builtin heartbeat feature. Therefore, the configuration options " "`coordination.heartbeat`, `coordination.initial_reconnect_backoff` and " "`coordination.max_reconnect_backoff` have been removed." msgstr "" #: ../source/pike.rst:878 ../source/queens.rst:985 msgid "" "When managing volume types an OpenStack provider is now given more control " "to grant access to for different storage type operations. The provider can " "now customize access to type create, delete, update, list, and show using " "new entries in the cinder policy file." msgstr "" #: ../source/pike.rst:882 ../source/queens.rst:989 msgid "" "As an example one provider may have roles called viewer, admin, type_viewer, " "and say type_admin. Admin and type_admin can create, delete, update types. " "Everyone can list the storage types. Admin, type_viewer, and type_admin can " "view the extra_specs." msgstr "" #: ../source/pike.rst:886 ../source/queens.rst:993 msgid "" "\"volume_extension:types_extra_specs:create\": \"rule:admin or rule:" "type_admin\", \"volume_extension:types_extra_specs:delete\": \"rule:admin or " "rule:type_admin\", \"volume_extension:types_extra_specs:index\": \"\", " "\"volume_extension:types_extra_specs:show\": \"rule:admin or rule:type_admin " "or rule:type_viewer\", \"volume_extension:types_extra_specs:update\": \"rule:" "admin or rule:type_admin\"" msgstr "" #: ../source/pike.rst:894 msgid "" "Cinder now defaults to using the Glance v2 API. The ``glance_api_version`` " "configuration option has been deprecated and will be removed in the 12.0.0 " "Queens release." msgstr "" #: ../source/pike.rst:898 msgid "The VMware VMDK driver now enforces minimum vCenter version of 5.5." msgstr "" #: ../source/pike.rst:908 msgid "" "The Cinder v2 API has now been marked as deprecated. All new client code " "should use the v3 API. API v3 adds support for microversioned API calls. If " "no microversion is requested, the base 3.0 version for the v3 API is " "identical to v2." msgstr "" #: ../source/pike.rst:915 msgid "" "Instead of using osapi_volume_base_url use public_endpoint. Both do the same " "thing." msgstr "" #: ../source/pike.rst:919 msgid "The fss_pool option is deprecated. Use fss_pools instead." msgstr "" #: ../source/pike.rst:923 msgid "" "The Hitachi Block Storage Driver (HBSD) and VSP driver have been marked as " "unsupported and are now deprecated. enable_unsupported_driver will need to " "be set to True in cinder.conf to continue to use them." msgstr "" #: ../source/pike.rst:927 msgid "" "The Hitachi NAS NFS driver has been marked as unsupported and is now " "deprecated. enable_unsupported_driver will need to be set to True in cinder." "conf to continue to use it." msgstr "" #: ../source/pike.rst:931 msgid "" "The Blockbridge driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_drivers`` will need to be set to ``True`` in cinder." "conf to continue to use it. If its support status does not change it will be " "removed in the next release." msgstr "" #: ../source/pike.rst:938 msgid "" "The Coho driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it. If its support status " "does not change, they will be removed in the Queens development cycle." msgstr "" #: ../source/pike.rst:946 msgid "" "The Falconstor drivers have been marked as unsupported and are now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use it. If its support " "status does not change, they will be removed in the Queens development cycle." "" msgstr "" #: ../source/pike.rst:954 msgid "" "The Infortrend drivers have been marked as unsupported and are now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use them. If their " "support status does not change, they will be removed in the Queens " "development cycle." msgstr "" #: ../source/pike.rst:963 msgid "" "The QNAP driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_drivers`` will need to be set to ``True`` in cinder." "conf to continue to use it. If its support status does not change it will be " "removed in the next release." msgstr "" #: ../source/pike.rst:970 msgid "" "The Reduxio driver has been marked unsupported and is now deprecated. " "``use_unsupported_driver`` will need to be set to ``True`` in the driver's " "section in cinder.conf to use it. If its support status does not change, the " "driver will be removed in the Queens development cycle." msgstr "" #: ../source/pike.rst:978 msgid "" "The Synology driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in ``cinder.conf`` to continue to use it. If its support " "status does not change, the driver will be removed in the Queens development " "cycle." msgstr "" #: ../source/pike.rst:986 msgid "" "The Tegile driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it. If its support status " "does not change, they will be removed in the Queens development cycle." msgstr "" #: ../source/pike.rst:994 msgid "" "The Violin drivers have been marked as unsupported and are now deprecated. " "``enable_unsupported_drivers`` will need to be set to ``True`` in cinder." "conf to continue to use them. If its support status does not change it will " "be removed in the next release." msgstr "" #: ../source/pike.rst:1001 msgid "" "The X-IO driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it. If its support status " "does not change, they will be removed in the Queens development cycle." msgstr "" #: ../source/pike.rst:1009 msgid "" "The ZTE driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it. If its support status " "does not change, they will be removed in the Queens development cycle." msgstr "" #: ../source/pike.rst:1017 msgid "" "The os_privileged_xxx and nova_xxx in the [default] section are deprecated " "in favor of the settings in the [nova] section." msgstr "" #: ../source/pike.rst:1021 msgid "Remove mirror policy parameter from huawei driver." msgstr "" #: ../source/pike.rst:1025 msgid "" "Support for ScaleIO 1.32 is now deprecated and will be removed in a future " "release." msgstr "" #: ../source/pike.rst:1030 msgid "" "The ScaleIO Driver has deprecated several options specified in ``cinder." "conf``: * ``sio_protection_domain_id`` * ``sio_protection_domain_name``, * " "``sio_storage_pool_id`` * ``sio_storage_pool_name``. Users of the ScaleIO " "Driver should now utilize the ``sio_storage_pools`` options to provide a " "list of protection_domain:storage_pool pairs." msgstr "" #: ../source/pike.rst:1042 msgid "" "The ScaleIO Driver has deprecated the ability to specify the protection " "domain, as ``sio:pd_name``, and storage pool, as ``sio:sp_name``, extra " "specs in volume types. The supported way to specify a specific protection " "domain and storage pool in a volume type is to define a ``pool_name`` extra " "spec and set the value to the appropriate ``protection_domain_name:" "storage_pool_name``." msgstr "" #: ../source/pike.rst:1052 msgid "" "The 'smbfs_allocation_info_file_path' SMBFS driver config option is now " "deprecated as we're no longer using a JSON file to store volume allocation " "data. This file had a considerable chance of getting corrupted." msgstr "" #: ../source/pike.rst:1064 msgid "Add filter, sorter and pagination support in group snapshot listings." msgstr "" #: ../source/pike.rst:1068 msgid "" "Cinder stopped supporting single-backend configurations in Ocata. However, " "sample ``cinder.conf`` was still generated with driver-related options in " "``[DEFAULT]`` section, where those options had no effect at all. Now all of " "driver options are listed in ``[backend_defaults]`` section, that indicates " "that those options are effective only in this section and " "``[]`` sections listed in ``enabled_backends``." msgstr "" #: ../source/pike.rst:1077 msgid "" "Fixed misleading error message when NetApp copyoffload tool is not in place " "during image cloning." msgstr "" #: ../source/pike.rst:1082 msgid "" "Modifying the extra-specs of an in use Volume Type was something that we've " "unintentionally allowed. The result is unexpected or unknown volume " "behaviors in cases where a type was modified while a volume was assigned " "that type. This has been particularly annoying for folks that have assigned " "the volume-type to a different/new backend device. In case there are " "customers using this \"bug\" we add a config option to retain the bad " "behavior \"allow_inuse_volume_type_modification\", with a default setting of " "False (Don't allow). Note this config option is being introduced as " "deprecated and will be removed in a future release. It's being provided as " "a bridge to not break upgrades without notice." msgstr "" #: ../source/pike.rst:1087 msgid "" "Fixed issue where ``create`` and ``update`` api's of ``volume-type`` and " "``group_type`` were returning 500 error if boolean 'is_public' value passed " "in the form of string. Now user can pass following valid boolean values to " "these api's: '0', 'f', 'false', 'off', 'n', 'no', '1', 't', 'true', 'on', " "'y', 'yes'" msgstr "" #: ../source/pike.rst:1101 msgid "" "Now cinder will refresh the az cache immediately if previous create volume " "task failed due to az not found." msgstr "" #: ../source/pike.rst:1110 msgid "Update backend state in scheduler when extending volume." msgstr "" #: ../source/pike.rst:1114 msgid "" "Add 'display_name' and 'display_description' validation for creating/" "updating snapshot and volume operations." msgstr "" #: ../source/pike.rst:1118 msgid "" "After transferring a volume without snapshots from one user project to " "another user project, if the receiving user uses cascade deleting, it will " "cause some exceptions in driver and volume will be error_deleting. Adding " "additional check to ensure there are no snapshots left in other project when " "cascade deleting a tranferred volume." msgstr "" #: ../source/pike.rst:1122 msgid "" "Creating a new volume from an image that was created from an encrypted " "Cinder volume now succeeds." msgstr "" #: ../source/pike.rst:1126 msgid "" "Fixed using of the user's token in the nova client (`bug #1686616 `_)" msgstr "" #: ../source/pike.rst:1136 ../source/queens.rst:1177 msgid "" "Fixes an issue where starting the Pure volume drivers with replication " "enabled and default values for pure_replica_interval_default would cause an " "error to be raised from the backend." msgstr "" #: ../source/pike.rst:1140 msgid "" "A bug in the Quobyte driver was fixed that prevented backing up volumes and " "snapshots" msgstr "" #: ../source/pike.rst:1145 msgid "" "Fixes a bug that prevented the configuration of multiple redundant Quobyte " "registries in the quobyte_volume_url config option." msgstr "" #: ../source/pike.rst:1150 msgid "" "When backing up a volume from a snapshot, the volume status would be set to " "\"backing-up\", preventing operations on the volume until the backup is " "complete. This status is now set on the snapshot instead, making the volume " "available for other operations." msgstr "" #: ../source/pike.rst:1154 msgid "" "Add ``all_tenants``, ``project_id`` support in the attachment list and " "detail APIs." msgstr "" #: ../source/pike.rst:1158 msgid "" "The create volume api will now return 400 error instead of 404/500 if user " "passes non-uuid values to consistencygroup_id, source_volid and " "source_replica parameters in the request body." msgstr "" #: ../source/pike.rst:1164 msgid "" "Add 'LUNType' configuration verification for Huawei driver when connecting " "to Dorado array. Because Dorado array only supports 'Thin' lun type, so " "'LUNType' only can be configured as 'Thin', any other type is invalid and if " "'LUNType' not explicitly configured, by default use 'Thin' for Dorado array." msgstr "" #: ../source/pike.rst:1172 msgid "" "The Windows iSCSI driver now honors the configured iSCSI addresses, ensuring " "that only those addresses will be used for iSCSI traffic." msgstr "" #: ../source/pike.rst:1177 msgid "" "Oracle ZFSSA iSCSI - allows a volume to be connected to more than one " "connector at the same time, which is required for live-migration to work. " "ZFSSA software release 2013.1.3.x (or newer) is required for this to work." msgstr "" #: ../source/pike.rst:1187 msgid "" "Modify default lvm_type setting from thick to auto. This will result in " "Cinder preferring thin on init, if there are no LV's in the VG it will " "create a thin-pool and use thin. If there are LV's and no thin-pool it will " "continue using thick." msgstr "" #: ../source/queens.rst:3 msgid "Queens Series Release Notes" msgstr "" #: ../source/queens.rst:8 msgid "12.0.10-10" msgstr "" #: ../source/queens.rst:17 ../source/rocky.rst:810 msgid "" "The XtremIO driver has been fixed to correctly report the " "\"free_capacity_gb\" size." msgstr "" #: ../source/queens.rst:28 msgid "12.0.10" msgstr "" #: ../source/queens.rst:58 msgid "12.0.8" msgstr "" #: ../source/queens.rst:87 msgid "12.0.7" msgstr "" #: ../source/queens.rst:103 msgid "12.0.6" msgstr "" #: ../source/queens.rst:121 msgid "12.0.5" msgstr "" #: ../source/queens.rst:130 ../source/rocky.rst:261 msgid "" "Multiattach support is disabled for the LVM driver when using the LIO iSCSI " "target. This functionality will be fixed in a later release." msgstr "" #: ../source/queens.rst:221 msgid "" "Updated the parameter storwzie_preferred_host_site from StrOpt to DictOpt in " "cinder back-end configuration, and removed it from volume type configuration." "" msgstr "" #: ../source/queens.rst:229 msgid "12.0.4" msgstr "" #: ../source/queens.rst:238 ../source/rocky.rst:417 msgid "" "The NetApp ONTAP driver supports a new configuration option " "``netapp_api_trace_pattern`` to enable filtering backend API interactions to " "log. This option must be specified in the backend section when desired and " "it accepts a valid python regular expression." msgstr "" #: ../source/queens.rst:252 ../source/rocky.rst:631 msgid "" "In NEC driver, the number of volumes in a storage pool is no longer limited " "to 1024. More volumes can be created with storage firmware revision 1015 or " "later." msgstr "" #: ../source/queens.rst:288 ../source/rocky.rst:854 msgid "" "Volume \"force delete\" was introduced with the 3.23 API microversion, " "however the check for in the service was incorrectly looking for " "microversion 3.2. That check has now been fixed. It is possible that an API " "call using a microversion below 3.23 would previously work for this call, " "which will now fail. This closes `bug #1783028 `_." msgstr "" #: ../source/queens.rst:302 ../source/rocky.rst:907 msgid "VMAX driver - fixes SSL certificate verification error." msgstr "" #: ../source/queens.rst:315 msgid "12.0.3" msgstr "" #: ../source/queens.rst:355 msgid "12.0.2" msgstr "" #: ../source/queens.rst:372 ../source/rocky.rst:494 msgid "" "Cinder-manage DB sync command can now bump the RPC and Objects versions of " "the services to avoid a second restart when doing offline upgrades." msgstr "" #: ../source/queens.rst:400 ../source/rocky.rst:662 msgid "" "On offline upgrades, due to the rolling upgrade mechanism we need to restart " "the cinder services twice to complete the installation just like in the " "rolling upgrades case. First you stop the cinder services, then you upgrade " "them, you sync your DB, then you start all the cinder services, and then you " "restart them all. To avoid this last restart we can now instruct the DB " "sync to bump the services after the migration is completed, the command to " "do this is `cinder-manage db sync --bump-versions`" msgstr "" #: ../source/queens.rst:428 ../source/rocky.rst:917 msgid "" "After an offline upgrade we had to restart all Cinder services twice, now " "with the `cinder-manage db sync --bump-versions` command we can avoid the " "second restart." msgstr "" #: ../source/queens.rst:438 ../source/rocky.rst:974 msgid "Dell EMC VNX driver: Enhances the performance of create/delete volume." msgstr "" #: ../source/queens.rst:444 msgid "12.0.1" msgstr "" #: ../source/queens.rst:453 ../source/rocky.rst:329 msgid "Add support to force detach a volume from all hosts on 3PAR." msgstr "" #: ../source/queens.rst:457 ../source/rocky.rst:498 msgid "" "Adds support to configure the size of the native thread pool used by the " "cinder volume and backup services. For the backup we use " "`backup_native_threads_pool_size` in the `[DEFAULT]` section, and for the " "backends we use `backend_native_threads_pool_size` in the driver section." msgstr "" #: ../source/queens.rst:482 ../source/rocky.rst:867 msgid "" "When encryption keys based on the ConfKeyManager's fixed_key are migrated to " "Barbican, ConfKeyManager keys stored in the Backup table are included in the " "migration process. Fixes `bug 1757235 `__." msgstr "" #: ../source/queens.rst:489 ../source/rocky.rst:921 msgid "" "Fixes concurrency issue on backups, where only 20 native threads could be " "concurrently be executed. Now default will be 60, and can be changed with " "`backup_native_threads_pool_size`." msgstr "" #: ../source/queens.rst:493 ../source/rocky.rst:925 msgid "" "RBD driver can have bottlenecks if too many slow operations are happening at " "the same time (for example many huge volume deletions), we can now use the " "`backend_native_threads_pool_size` option in the RBD driver section to " "resolve the issue." msgstr "" #: ../source/queens.rst:499 msgid "12.0.0" msgstr "" #: ../source/queens.rst:508 msgid "Added get capability feature for HPE-3PAR." msgstr "" #: ../source/queens.rst:512 msgid "Added availability_zone filter for snapshots list." msgstr "" #: ../source/queens.rst:516 msgid "" "Added count info in volume, snapshot and backup's list APIs since 3.45." msgstr "" #: ../source/queens.rst:524 ../source/queens.rst:820 msgid "" "Added policies to disallow multiattach operations. This includes two " "policies, the first being a general policy to allow the creation or retyping " "of multiattach volumes is a volume create policy with the name ``volume:" "multiattach``. The second policy is specifically for disallowing the ability " "to create multiple attachments on a volume that is marked as bootable, and " "is an attachment policy with the name ``volume:multiattach_bootable_volume``." " The default for these new policies is ``rule:admin_or_owner``; be aware " "that if you wish to disable either of these policies for your users you will " "need to modify the default policy settings." msgstr "" #: ../source/queens.rst:530 msgid "" "Add ability to call failover-host on a replication enabled SF cluster a " "second time with host id = default to initiate a failback to the default " "configured SolidFire Cluster." msgstr "" #: ../source/queens.rst:537 msgid "" "LUKS Encrypted RBD volumes can now be created by cinder-volume. This " "capability was previously blocked by the rbd volume driver due to the lack " "of any encryptors capable of attaching to an encrypted RBD volume. These " "volumes can also be seeded with RAW image data from Glance through the use " "of QEMU 2.10 and the qemu-img convert command." msgstr "" #: ../source/queens.rst:545 msgid "Add ability to specify backup driver via class name." msgstr "" #: ../source/queens.rst:549 msgid "" "New Cinder volume driver for Inspur InStorage. The new driver supports iSCSI." "" msgstr "" #: ../source/queens.rst:554 msgid "" "Cinder now supports the use of 'max_over_subscription_ratio = auto' which " "automatically calculates the value for max_over_subscription_ratio in the " "scheduler." msgstr "" #: ../source/queens.rst:558 msgid "Added backend driver for VMware VStorageObject (First Class Disk)." msgstr "" #: ../source/queens.rst:567 msgid "" "Added support for cloning volume asynchronously, it can be enabled by option " "async_clone set to true in parameter metadata when creating volume from " "volume or snapshot." msgstr "" #: ../source/queens.rst:573 msgid "Added replication group support in HPE 3PAR cinder driver." msgstr "" #: ../source/queens.rst:577 msgid "" "Added support for oversubscription in thin provisioning in the INFINIDAT " "InfiniBox driver. To use oversubscription, define " "``max_over_subscription_ratio`` in the cinder configuration file." msgstr "" #: ../source/queens.rst:587 msgid "" "When Barbican is the encryption key_manager backend, any encryption keys " "associated with the legacy ConfKeyManager will be automatically migrated to " "Barbican. All database references to the ConfKeyManager's all-zeros key ID " "will be updated with a Barbican key ID. The encryption keys do not change. " "Only the encryption key ID changes." msgstr "" #: ../source/queens.rst:593 msgid "" "Key migration is initiated on service startup, and entries in the cinder-" "volume log will indicate the migration status. Log entries will indicate " "when a volume's encryption key ID has been migrated to Barbican, and a " "summary log message will indicate when key migration has finished." msgstr "" #: ../source/queens.rst:600 msgid "" "Support manage/unmanage volume and manage/unmanage snapshot functions for " "the NEC volume driver." msgstr "" #: ../source/queens.rst:604 msgid "" "Cinder now support policy in code, which means if users don't need to modify " "any of the default policy rules, they do not need a policy file. Users can " "modify/generate a `policy.yaml` file which will override specific policy " "rules from their defaults." msgstr "" #: ../source/queens.rst:611 msgid "" "Dell EMC PS volume driver reports the total number of volumes on the backend " "in volume stats." msgstr "" #: ../source/queens.rst:615 msgid "" "Add enhanced support to the QNAP Cinder driver, including 'CHAP', 'Thin " "Provision', 'SSD Cache', 'Dedup' and 'Compression'." msgstr "" #: ../source/queens.rst:620 msgid "QNAP Cinder driver added support for QES fw 2.0.0." msgstr "" #: ../source/queens.rst:624 msgid "" "Added driver-assisted volume migration to RBD driver. This allows a volume " "to be efficiently copied by Ceph from one pool to another within the same " "cluster." msgstr "" #: ../source/queens.rst:634 msgid "Allow rbd driver to list manageable volumes." msgstr "" #: ../source/queens.rst:638 msgid "Re-added QNAP Cinder volume driver." msgstr "" #: ../source/queens.rst:642 msgid "" "Added \"backend_state: up/down\" in response body of service list if context " "is admin. This feature will help operators or cloud management system to get " "the backend device state in every service. If device state is *down*, " "specify that storage device has got some problems. Give more information to " "locate bugs quickly." msgstr "" #: ../source/queens.rst:650 msgid "Added revert volume to snapshot in 3par driver." msgstr "" #: ../source/queens.rst:654 msgid "" "Add support to backup volume using snapshot in the Unity driver, which " "enables backing up of volumes that are in-use." msgstr "" #: ../source/queens.rst:658 msgid "" "The multiattach capability has been enabled and verified as working with the " "ScaleIO driver. It is the user's responsibility to add some type of " "exclusion (at the file system or network file system layer) to prevent " "multiple writers from corrupting data on the volume." msgstr "" #: ../source/queens.rst:666 msgid "" "The SMBFS volume driver can now be configured to use fixed vhd/x images " "through the 'nas_volume_prov_type' config option." msgstr "" #: ../source/queens.rst:671 msgid "" "The SMBFS driver now supports the volume manage/unmanage feature. Images " "residing on preconfigured shares may be listed and managed by Cinder." msgstr "" #: ../source/queens.rst:676 msgid "" "The SMBFS volume driver now supports reverting volumes to the latest " "snapshot." msgstr "" #: ../source/queens.rst:681 msgid "The StorPool backend driver was added." msgstr "" #: ../source/queens.rst:685 msgid "Add backup snapshots support for Storwize/SVC driver." msgstr "" #: ../source/queens.rst:689 msgid "Add consistent replication group support in Storwize Cinder driver." msgstr "" #: ../source/queens.rst:693 msgid "" "Disable creating volume with non cg_snapshot group_id in Storwize/SVC driver." "" msgstr "" #: ../source/queens.rst:697 msgid "" "Added hyperswap volume and group support in Storwize cinder driver. Storwize/" "svc versions prior to 7.6 do not support this feature." msgstr "" #: ../source/queens.rst:701 msgid "Add reverting to snapshot support in Storwize Cinder driver." msgstr "" #: ../source/queens.rst:705 msgid "" "Starting with API microversion 3.47, Cinder now supports the ability to " "create a volume directly from a backup. For instance, you can use the " "command: ``cinder create --backup-id `` in cinderclient." msgstr "" #: ../source/queens.rst:711 msgid "Add support to force detach a volume from all hosts on Unity." msgstr "" #: ../source/queens.rst:715 msgid "" "Added support for Keystone middleware feature to pass service token along " "with the user token for Cinder to Nova and Glance services. This will help " "get rid of user token expiration issues during long running tasks e.g. " "creating volume snapshot (Cinder->Nova) and creating volume from image " "(Cinder->Glance) etc. To use this functionality a service user needs to be " "created first. Add the service user configurations in ``cinder.conf`` under " "``service_user`` group and set ``send_service_user_token`` flag to ``True``." msgstr "" #: ../source/queens.rst:725 msgid "Add chap authentication support for the vmax backend." msgstr "" #: ../source/queens.rst:729 msgid "Support for manage/ unmanage snapshots on VMAX cinder driver." msgstr "" #: ../source/queens.rst:733 msgid "" "Added asynchronous remote replication support in Dell EMC VMAX cinder driver." "" msgstr "" #: ../source/queens.rst:737 msgid "Support for VMAX SRDF/Metro on VMAX cinder driver." msgstr "" #: ../source/queens.rst:741 msgid "" "Add consistent replication group support in Dell EMC VMAX cinder driver." msgstr "" #: ../source/queens.rst:745 msgid "" "Support for reverting a volume to a previous snapshot in VMAX cinder driver." msgstr "" #: ../source/queens.rst:749 msgid "Added support for revert-to-snapshot in the VMware VMDK driver." msgstr "" #: ../source/queens.rst:760 msgid "" "VMware VMDK driver now supports a config option ``vmware_lazy_create`` to " "disable the default behavior of lazy creation of raw volumes in the backend." msgstr "" #: ../source/queens.rst:766 msgid "" "VMware VMDK driver now supports changing adpater type using retype. To " "change the adapter type, set ``vmware:adapter_type`` in the new volume type." msgstr "" #: ../source/queens.rst:772 msgid "" "The volumes created by VMware VMDK driver will be displayed as \"managed by " "OpenStack Cinder\" in vCenter server." msgstr "" #: ../source/queens.rst:781 msgid "" "Logging path can now be configured for vzstorage driver in shares config " "file (specified by vzstorage_shares_config option). To set custom logging " "path add `'-l', ''` to mount options array. Otherwise " "default logging path `/var/log/vstorage//cinder.log.gz` will " "be used." msgstr "" #: ../source/queens.rst:789 msgid "" "VzStorage volume driver now supports choosing desired volume format by " "setting vendor property 'vz:volume_format' in volume type metadata. Allowed " "values are 'ploop', 'qcow2' and 'raw'." msgstr "" #: ../source/queens.rst:795 msgid "" "Added new option to delete XtremIO initiator groups after the last volume " "was detached from them. Cleanup can be enabled by setting " "``xtremio_clean_unused_ig`` to ``True`` under the backend settings in cinder." "conf." msgstr "" #: ../source/queens.rst:826 msgid "" "Operators should change backup driver configuration value to use class name " "to get backup service working in a 'S' release." msgstr "" #: ../source/queens.rst:831 msgid "" "Support for NetApp ONTAP 7 (previously known as \"Data ONTAP operating in " "7mode\") has been removed. The NetApp Unified driver can now only be used " "with NetApp Clustered Data ONTAP and NetApp E-Series storage systems. This " "removal affects all three storage protocols that were supported on for ONTAP " "7 - iSCSI, NFS and FC. Deployers are advised to consult the `migration " "support `_ provided " "to transition from ONTAP 7 to Clustered Data ONTAP operating system." msgstr "" #: ../source/queens.rst:839 msgid "" "The support for ``cinder.keymgr.barbican.BarbicanKeyManager`` and the " "``[keymgr]`` config section has now been removed. All configs should now be " "switched to use ``castellan.key_manager.barbican_key_manager." "BarbicanKeyManager`` and the ``[key_manager]`` config section." msgstr "" #: ../source/queens.rst:847 msgid "" "The Cinder database can now only be ugpraded from changes since the Newton " "release. In order to upgrade from a version prior to that, you must now " "upgrade to at least Newton first, then to Queens or later." msgstr "" #: ../source/queens.rst:853 ../source/queens.rst:1043 msgid "" "The hosts api extension is now deprecated and will be removed in a future " "version." msgstr "" #: ../source/queens.rst:858 msgid "" "The Glance v1 API has been deprecated and will soon be removed. Cinder " "support for using the v1 API was deprecated in the Pike release and is now " "no longer available. The ``glance_api_version`` configuration option to " "support version selection has now been removed." msgstr "" #: ../source/queens.rst:865 msgid "" "The default value has been removed for the LVM specific " "`lvm_max_over_subscription_ratio` setting. This changes the behavior so that " "LVM backends now adhere to the common `max_over_subscription_ratio` setting. " "The LVM specific config option may still be used, but it is now deprecated " "and will be removed in a future release." msgstr "" #: ../source/queens.rst:873 msgid "" "The Cisco Fibre Channel Zone Manager driver has been marked as unsupported " "and is now deprecated. ``enable_unsupported_driver`` will need to be set to " "``True`` in the driver's section in cinder.conf to continue to use it." msgstr "" #: ../source/queens.rst:880 msgid "" "Added automatic configuration of SAN access control for the NEC volume " "driver." msgstr "" #: ../source/queens.rst:884 msgid "" "In NEC driver, the deprecated configuration parameter " "`ldset_controller_node_name` was deleted." msgstr "" #: ../source/queens.rst:892 msgid "" "The following volume drivers were deprecated in the Pike release and have " "now been removed:" msgstr "" #: ../source/queens.rst:895 msgid "Block device driver" msgstr "" #: ../source/queens.rst:896 msgid "Blockbridge" msgstr "" #: ../source/queens.rst:897 msgid "Coho" msgstr "" #: ../source/queens.rst:898 msgid "FalconStor FSS" msgstr "" #: ../source/queens.rst:899 msgid "Infortrend" msgstr "" #: ../source/queens.rst:900 msgid "QNAP" msgstr "" #: ../source/queens.rst:901 msgid "Reduxio" msgstr "" #: ../source/queens.rst:902 msgid "Tegile" msgstr "" #: ../source/queens.rst:903 msgid "Violin" msgstr "" #: ../source/queens.rst:904 msgid "X-IO" msgstr "" #: ../source/queens.rst:905 msgid "ZTE" msgstr "" #: ../source/queens.rst:915 msgid "" "BlockDeviceDriver was deprecated in Ocata release and marked as " "'unsupported'. There is no CI for it too. If you used this driver before you " "have to migrate your volumes to LVM with LIO target yourself before " "upgrading to Queens release to get your volumes working." msgstr "" #: ../source/queens.rst:922 msgid "" "The old deprecated ``keymgr`` options have been removed. Configuration " "options using the ``[keymgr]`` group will not be applied anymore. Use the " "``[key_manager]`` group from Castellan instead. The Castellan ``backend`` " "options should also be used instead of ``api_class``, as most of the options " "that lived in Cinder have migrated to Castellan." msgstr "" #: ../source/queens.rst:929 msgid "" "Instead of ``api_class`` option ``cinder.keymgr.barbican." "BarbicanKeyManager``, use ``backend`` option `barbican``" msgstr "" #: ../source/queens.rst:932 msgid "" "``cinder.keymgr.conf_key_mgr.ConfKeyManager`` still remains, but the " "``fixed_key`` configuration options should be moved to the ``[key_manager]`` " "section" msgstr "" #: ../source/queens.rst:937 msgid "" "Removed the deprecated options for the Nova connection:> " "os_privileged_user{name, password, tenant, auth_url}, nova_catalog_info, " "nova_catalog_admin_info, nova_endpoint_template, " "nova_endpoint_admin_template, nova_ca_certificates_file, nova_api_insecure. " "From Pike, using the [nova] section is preferred to configure compute " "connection for Guest Assisted Snapshost or the InstanceLocalityFilter." msgstr "" #: ../source/queens.rst:941 msgid "" "The Hitachi HNAS, HBSD, and VSP volume drivers were marked as deprecated in " "the Pike release and have now been removed. Hitachi storage drivers are now " "only available directly from Hitachi." msgstr "" #: ../source/queens.rst:947 msgid "" "The old deprecated ``hp3par*`` options have been removed. Use the " "``hpe3par*`` instead of them." msgstr "" #: ../source/queens.rst:952 msgid "" "The old deprecated ``nas_ip`` option has been removed. Use the ``nas_host`` " "instead of it." msgstr "" #: ../source/queens.rst:957 msgid "" "The old deprecated ``netapp_eseries_host_type`` option has been removed. Use " "the ``netapp_host_type`` instead." msgstr "" #: ../source/queens.rst:962 msgid "" "The old deprecated ``pybasedir`` option has been removed. Use the " "``state_path`` instead." msgstr "" #: ../source/queens.rst:967 msgid "" "The `osapi_volume_base_URL` config option was deprecated in Pike and has now " "been removed. The `public_endpoint` config option should be used instead." msgstr "" #: ../source/queens.rst:973 msgid "" "The Cinder API v1 was deprecated in the Juno release and defaulted to be " "disabled in the Ocata release. It is now removed completely. If upgrading " "from a previous version, it is recommended you edit your `/etc/cinder/api-" "paste.ini` file to remove all references to v1." msgstr "" #: ../source/queens.rst:980 msgid "" "The Windows iSCSI driver has been renamed. The updated driver location is " "``cinder.volume.drivers.windows.iscsi.WindowsISCSIDriver``." msgstr "" #: ../source/queens.rst:1001 msgid "" "We replaced the config option in the disco volume driver " "\"disco_choice_client\" with \"disco_client_protocol\". We add " "\"san_api_port\" as new config option in san driver for accessing the SAN " "API using this port." msgstr "" #: ../source/queens.rst:1019 msgid "Backup driver initialization using module name is deprecated." msgstr "" #: ../source/queens.rst:1023 msgid "" "The Castellan library used for encryption has deprecated the ``api_class`` " "config option. Configuration files using this should now be updated to use " "the ``backend`` option instead." msgstr "" #: ../source/queens.rst:1029 msgid "" "Backup service to driver mapping is deprecated. If you use old values like " "'cinder.backup.services.swift' or 'cinder.backup.services.ceph' it should be " "changed to 'cinder.backup.drivers.swift' or 'cinder.backup.drivers.ceph' " "accordingly to get your backup service working in the 'R' release." msgstr "" #: ../source/queens.rst:1037 msgid "" "The Consistency Group APIs have now been marked as deprecated and will be " "removed in a future release. Generic Volume Group APIs should be used " "instead." msgstr "" #: ../source/queens.rst:1048 msgid "" "Deprecate the \"cinder-manage logs\" commands. These will be removed in a " "later release." msgstr "" #: ../source/queens.rst:1053 msgid "" "The `lvm_max_overprovision_ratio` config option has been deprecated. It will " "be removed in a future release. Configurations should move to using the " "common `max_overprovision_ratio` config option." msgstr "" #: ../source/queens.rst:1059 msgid "" "The Cisco Firbre Channel Zone Manager driver has been marked as unsupported " "and is now deprecated. ``enable_unsupported_driver`` will need to be set to " "``True`` in the driver's section in cinder.conf to continue to use it. If " "its support status does not change, they will be removed in the Queens " "development cycle." msgstr "" #: ../source/queens.rst:1067 msgid "" "``iscsi_ip_address``, ``iscsi_port``, ``target_helper``, " "``iscsi_target_prefix`` and ``iscsi_protocol`` config options are deprecated " "in flavor of ``target_ip_address``, ``target_port``, ``target_helper``, " "``target_prefix`` and ``target_protocol`` accordingly. Old config options " "will be removed in S release." msgstr "" #: ../source/queens.rst:1075 msgid "" "The use of xml files for vmax backend configuration is now deprecated and " "will be removed during the following release. Deployers are encouraged to " "use the cinder.conf for configuring connections to the vmax." msgstr "" #: ../source/queens.rst:1087 msgid "" "Fix the bug that Cinder can't support creating volume from Nova specific " "image which only includes ``snapshot-id`` metadata (Bug" msgstr "" #: ../source/queens.rst:1091 msgid "" "Fix the bug that Cinder would commit quota twice in a clean environment when " "managing volume and snapshot resource (Bug" msgstr "" #: ../source/queens.rst:1100 msgid "" "The NetApp cDOT driver operating with NFS protocol has been fixed to manage " "volumes correctly when ``nas_secure_file_operations`` option has been set to " "False." msgstr "" #: ../source/queens.rst:1104 msgid "Now the ``os-host show`` API will count project's resource correctly." msgstr "" #: ../source/queens.rst:1113 msgid "" "The NetApp E-series driver has been fixed to correctly report the " "\"provisioned_capacity_gb\". Now it sums the capacity of all the volumes in " "the configured backend to get the correct value. This bug fix affects all " "the protocols supported by the driver (FC and iSCSI)." msgstr "" #: ../source/queens.rst:1117 msgid "" "Added ability to purge records less than 1 day old, using the cinder-manage " "db_purge utility. This helps especially for those testing scenarios in which " "a a large number of volumes are created and deleted. (bug" msgstr "" #: ../source/queens.rst:1123 msgid "" "Fix the way encryption key IDs are managed for encrypted volume backups. " "When creating a backup, the volume's encryption key is cloned and assigned a " "new key ID. The backup's cloned key ID is now stored in the backup database " "so that it can be deleted whenever the backup is deleted." msgstr "" #: ../source/queens.rst:1128 msgid "" "When restoring the backup of an encrypted volume, the destination volume is " "assigned a clone of the backup's encryption key ID. This ensures every " "restored backup has a unique encryption key ID, even when multiple volumes " "have been restored from the same backup." msgstr "" #: ../source/queens.rst:1135 msgid "" "The reserve volume API was incorrectly enforcing \"volume:retype\" policy " "action. It has been corrected to \"volume_extension:volume_actions:reserve\"." "" msgstr "" #: ../source/queens.rst:1140 msgid "" "Fix the following volume image metadata endpoints returning None following " "policy enforcement failure:" msgstr "" #: ../source/queens.rst:1143 msgid "``os-set_image_metadata``" msgstr "" #: ../source/queens.rst:1144 msgid "``os-unset_image_metadata``" msgstr "" #: ../source/queens.rst:1146 msgid "The endpoints will now correctly raise a 403 Forbidden instead." msgstr "" #: ../source/queens.rst:1150 msgid "" "Volume group updates of any kind had previously required the group to be in " "``Available`` status. Updates to the group name or description will now work " "regardless of the volume group status." msgstr "" #: ../source/queens.rst:1164 msgid "" "Dell EMC PS Series Driver was creating unmanaged snapshots when extending " "volumes. Fixed it by adding the missing no-snap parameter. This changes " "fixes bug 1720454." msgstr "" #: ../source/queens.rst:1189 msgid "" "Quota validations are now forced for all APIs. skip_validation flag is now " "removed from the request body for the quota-set update API." msgstr "" #: ../source/queens.rst:1193 msgid "" "Multiple backends may now be enabled within the same Cinder Volume service " "on Windows by using the ``enabled_backends`` config option." msgstr "" #: ../source/queens.rst:1204 msgid "" "Default `policy.json` file is now removed as Cinder now uses default " "policies. A policy file is only needed if overriding one of the defaults." msgstr "" #: ../source/rocky.rst:3 msgid "Rocky Series Release Notes" msgstr "" #: ../source/rocky.rst:8 msgid "13.0.9-7" msgstr "" #: ../source/rocky.rst:24 msgid "13.0.9" msgstr "" #: ../source/rocky.rst:39 msgid "13.0.8" msgstr "" #: ../source/rocky.rst:62 msgid "13.0.7" msgstr "" #: ../source/rocky.rst:87 msgid "13.0.6" msgstr "" #: ../source/rocky.rst:112 msgid "13.0.4" msgstr "" #: ../source/rocky.rst:139 msgid "13.0.3" msgstr "" #: ../source/rocky.rst:148 msgid "" "VMAX driver support for new configuration option - vmax_snapvx_unlink_limit " "for specifying the maximum number of unlinks which will be performed before " "a clone operation. Default value is 3" msgstr "" #: ../source/rocky.rst:228 msgid "13.0.2" msgstr "" #: ../source/rocky.rst:252 msgid "13.0.1" msgstr "" #: ../source/rocky.rst:286 msgid "13.0.0" msgstr "" #: ../source/rocky.rst:295 msgid "" "Now scheduler plugins are aware of operation type via ``operation`` " "attribute in RequestSpec dictionary, plugins can support backend filtering " "according to backend status as well as operation type. Current possible " "values for ``operation`` are:" msgstr "" #: ../source/rocky.rst:299 msgid "create_volume" msgstr "" #: ../source/rocky.rst:300 msgid "extend_volume" msgstr "" #: ../source/rocky.rst:301 msgid "create_snapshot" msgstr "" #: ../source/rocky.rst:302 msgid "retype_volume" msgstr "" #: ../source/rocky.rst:303 msgid "migrate_volume" msgstr "" #: ../source/rocky.rst:304 msgid "manage_existing" msgstr "" #: ../source/rocky.rst:305 msgid "manage_existing_snapshot" msgstr "" #: ../source/rocky.rst:306 msgid "create_group" msgstr "" #: ../source/rocky.rst:310 msgid "" "Added boolean conf option 'split_loggers' in [default] section of cinder." "conf to `enable split logging`_ functionality. The default value of " "split_loggers option is set to False. Operator can set it's value to True to " "split HTTP content into subloggers to allow for fine-grained control of what " "is logged and how. This new config option 'split_loggers' should be enabled " "only when keystoneauth log level is set to DEBUG in 'default_log_levels' " "config option." msgstr "" #: ../source/rocky.rst:322 msgid "" "A new target, NVMET, is added for the LVM driver over RDMA, it allows cinder " "to use nvmetcli in order to create/delete subsystems on attaching/detaching " "an LVM volume to/from an instance." msgstr "" #: ../source/rocky.rst:333 msgid "" "Cinder now allows for capacity based QoS which can be useful in environments " "where storage performance scales with consumption (such as RBD backed " "storage). The newly added QoS specs are `read_iops_sec_per_gb`, " "`write_iops_sec_per_gb`, `total_iops_sec_per_gb`, `read_bytes_sec_per_gb`, " "`write_bytes_sec_per_gb` and `total_bytes_sec_per_gb`. These values will be " "multiplied by the size of the volume and passed to the consumer. For " "example, setting `total_iops_sec_per_gb` to 30 and setting " "`total_bytes_sec_per_gb` to `1048576` (1MB) then creating a 100 GB volume " "with that QoS will result in a volume with 3,000 total IOPs and 100MB/s " "throughput limit." msgstr "" #: ../source/rocky.rst:338 msgid "" "Cinder now allows for a minimum value when using the capacity based QoS in " "order to make sure small volumes can get a minimum allocation for them to be " "usable. The newly added QoS specs are `read_iops_sec_per_gb_min`, " "`write_iops_sec_per_gb_min`, `total_iops_sec_per_gb_min`, " "`read_bytes_sec_per_gb_min`, `write_bytes_sec_per_gb_min` and " "`total_bytes_sec_per_gb_min`" msgstr "" #: ../source/rocky.rst:343 msgid "" "A new cinder-manage command, reset_active_backend, was added to promote a " "failed-over backend participating in replication. This allows you to reset " "a backend without manually editing the database. A backend undergoing " "promotion using this command is expected to be in a disabled and frozen " "state. Support for both standalone and clustered backend configurations are " "supported." msgstr "" #: ../source/rocky.rst:352 msgid "" "Added dell_api_async_rest_timeout option to the Dell EMC SC driver. This is " "the timeout used for asynchronous REST calls to the Dell EMC SC REST API. " "Default is 15 seconds." msgstr "" #: ../source/rocky.rst:356 msgid "" "Added dell_api_sync_rest_timeout option to the Dell EMC SC driver. This is " "the timeout used for synchronous REST calls to the Dell EMC SC REST API. " "Default is 30 seconds." msgstr "" #: ../source/rocky.rst:360 msgid "" "Enabled Cinder Multi-Attach capability in the Dell EMC Storage Center Cinder " "driver." msgstr "" #: ../source/rocky.rst:364 msgid "IBM DS8K driver has added multiattach support." msgstr "" #: ../source/rocky.rst:368 ../source/rocky.rst:454 msgid "" "Added flag 'backend_state' which will give backend state info in service " "list." msgstr "" #: ../source/rocky.rst:372 msgid "NetApp ONTAP iSCSI and FCP drivers multiattach capability enabled." msgstr "" #: ../source/rocky.rst:376 msgid "NetApp ONTAP NFS multiattach capability enabled." msgstr "" #: ../source/rocky.rst:380 msgid "" "Support backup restore cancelation by changing the backup status to anything " "other than `restoring` using `cinder backup-reset-state`." msgstr "" #: ../source/rocky.rst:385 msgid "" "Cinder backup creation can now (since microversion 3.51) receive the " "availability zone where the backup should be stored." msgstr "" #: ../source/rocky.rst:390 msgid "" "Cinder backup now supports running multiple processes to make the most of " "the available CPU cores. Performance gains will be significant when running " "multiple concurrent backups/restores with compression. The number of " "processes is set with `backup_workers` configuration option." msgstr "" #: ../source/rocky.rst:405 msgid "" "Google backup driver now supports ``google-auth`` library, and is the " "preferred library if both ``google-auth`` (together with ``google-auth-" "httplib2``) and ``oauth2client`` libraries are present in the system." msgstr "" #: ../source/rocky.rst:409 msgid "Support for volume multi-attach in the INFINIDAT InfiniBox driver." msgstr "" #: ../source/rocky.rst:413 msgid "New FC Cinder volume driver for Inspur Instorage." msgstr "" #: ../source/rocky.rst:425 msgid "" "Added support to Pure Storage Volume Drivers for Active Cluster using the " "standard replication API's for the Block Storage Service." msgstr "" #: ../source/rocky.rst:429 msgid "Pure Storage FlashArray driver has added multiatach support." msgstr "" #: ../source/rocky.rst:433 msgid "QNAP Cinder driver added support for QES fw 2.1.0." msgstr "" #: ../source/rocky.rst:437 msgid "" "Added support for active-active replication to the RBD driver. This allows " "users to configure multiple volume backends that are all a member of the " "same cluster participating in replication." msgstr "" #: ../source/rocky.rst:441 msgid "Allow rbd driver to list manageable snapshots." msgstr "" #: ../source/rocky.rst:445 msgid "Allow rbd driver to report backend state." msgstr "" #: ../source/rocky.rst:449 msgid "" "Added flag 'backend_state: up/down' which will give backend state info in " "service list." msgstr "" #: ../source/rocky.rst:458 msgid "" "Dell EMC ScaleIO has been renamed to Dell EMC VxFlex OS. Documentation for " "the driver can be found under the new name. The driver maintains full " "backwards compatability with prior ScaleIO releases and no configuration " "changes are needed upon upgrade to the new version of the driver." msgstr "" #: ../source/rocky.rst:466 msgid "" "The SMBFS driver now supports the 'snapshot attach' feature. Special care " "must be taken when attaching snapshots though, as writing to a snapshot will " "corrupt the differencing image chain." msgstr "" #: ../source/rocky.rst:472 msgid "" "Added data reduction pool support for thin-provisoned and compressed volume " "in Storwize cinder driver." msgstr "" #: ../source/rocky.rst:477 msgid "Now availability zone is supported in volume type as below." msgstr "" #: ../source/rocky.rst:479 msgid "" "``RESKEY:availability_zones`` now is a reserved spec key for AZ volume type, " "and administrator can create AZ volume type that includes AZ restrictions by " "adding a list of Az's to the extra specs similar to: ``RESKEY:" "availability_zones: az1,az2``." msgstr "" #: ../source/rocky.rst:483 msgid "" "Extra spec ``RESKEY:availability_zones`` will only be used for filtering " "backends when creating and retyping volumes." msgstr "" #: ../source/rocky.rst:485 msgid "" "Volume type can be filtered within extra spec: /types?extra_specs={\"key\":" "\"value\"} since microversion \"3.52\"." msgstr "" #: ../source/rocky.rst:490 msgid "" "Added image signature verification support when creating volume from image. " "This depends on signature metadata from glance. This feature is turned on by " "default, administrators can change behaviour by updating option " "``verify_glance_signatures``. Also, an additional image metadata " "``signature_verified`` has been added to indicate whether signature " "verification was performed during creating process." msgstr "" #: ../source/rocky.rst:502 msgid "" "Support transfer volume with snapshots by default in new V3 API 'v3/" "volume_transfers'. After microverison 3.55, if users don't want to transfer " "snapshots, they could use the new optional argument `no_snapshots=True` in " "request body of new transfer creation API." msgstr "" #: ../source/rocky.rst:506 msgid "Dell EMC Unity driver: Add compressed volume support." msgstr "" #: ../source/rocky.rst:514 msgid "" "Dell EMC Unity: Implements `bp unity-multiattach-support `__ to support " "attaching a volume to multiple servers simultaneously." msgstr "" #: ../source/rocky.rst:526 msgid "" "Dell EMC Unity Driver: Add thick volume support. Refer to `Unity Cinder " "Configuration document `__ to create " "a thick volume." msgstr "" #: ../source/rocky.rst:533 msgid "Added ISCSI based driver for Veritas Access." msgstr "" #: ../source/rocky.rst:537 msgid "Dell EMC VMAX driver has added multiattach support." msgstr "" #: ../source/rocky.rst:541 msgid "" "Dell EMC VMAX driver has added list manageable volumes and snapshots support." "" msgstr "" #: ../source/rocky.rst:545 msgid "Log VMAX specific metadata of a volume if debug is enabled." msgstr "" #: ../source/rocky.rst:549 msgid "" "Support for retype (storage-assisted migration) of replicated volumes on " "VMAX cinder driver." msgstr "" #: ../source/rocky.rst:553 msgid "" "VMware VMDK driver and FCD driver now support a config option " "``vmware_datastore_regex`` to specify the regular expression pattern to " "match the name of datastores where backend volumes are created." msgstr "" #: ../source/rocky.rst:560 msgid "" "VMware VMDK driver and FCD driver now support NFS 4.1 datastores in vCenter " "server." msgstr "" #: ../source/rocky.rst:565 msgid "" "Added support to revert a volume to a snapshot with the Dell EMC VNX driver." msgstr "" #: ../source/rocky.rst:570 msgid "" "The Cinder Volume Backup service can now be run on Windows. It supports " "backing up volumes exposed by SMBFS/iSCSI Windows Cinder Volume backends, as " "well as any other Cinder backend that's accessible on Windows (e.g. SANs " "exposing volumes via iSCSI/FC)." msgstr "" #: ../source/rocky.rst:575 msgid "The Swift and Posix backup drivers are known to be working on Windows." msgstr "" #: ../source/rocky.rst:579 msgid "Dell EMC XtremIO driver has added multiattach support." msgstr "" #: ../source/rocky.rst:603 msgid "" "The Dell EMC CoprHD drivers have been marked as unsupported and are now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use it." msgstr "" #: ../source/rocky.rst:610 msgid "" "The DataCore drivers have been marked as unsupported and are now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it." msgstr "" #: ../source/rocky.rst:617 msgid "" "The Disco driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it." msgstr "" #: ../source/rocky.rst:624 msgid "" "The HGST driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it." msgstr "" #: ../source/rocky.rst:635 msgid "" "The following commands are no longer required to be listed in your rootwrap " "configuration: cgcreate; and cgset." msgstr "" #: ../source/rocky.rst:640 msgid "" "Backup service to driver mapping is removed. If you use old values like " "'cinder.backup.services.swift' or 'cinder.backup.services.ceph' it should be " "changed to 'cinder.backup.drivers.swift' or 'cinder.backup.drivers.ceph' " "accordingly to get your backup service working." msgstr "" #: ../source/rocky.rst:647 msgid "" "Removed the option ``allow_inuse_volume_type_modification`` which had been " "deprecated in Ocata release." msgstr "" #: ../source/rocky.rst:652 msgid "" "The LVM driver specific `lvm_max_over_subscription_ratio` setting had been " "deprecated and is now removed. Over subscription should now be managed using " "the generic `max_over_subscription_ratio` setting." msgstr "" #: ../source/rocky.rst:658 msgid "" "VMAX driver - Removed deprecated option ``cinder_dell_emc_config_file``" msgstr "" #: ../source/rocky.rst:672 msgid "" "Deprecate option `check_max_pool_luns_threshold`. The VNX driver will always " "check the threshold." msgstr "" #: ../source/rocky.rst:677 msgid "" "The Dell EMC CoprHD drivers have been marked as unsupported and are now " "deprecated. ``enable_unsupported_driver`` will need to be set to ``True`` in " "the driver's section in cinder.conf to continue to use it. If its support " "status does not change, they will be removed in the Stein development cycle." msgstr "" #: ../source/rocky.rst:685 msgid "" "The DataCore drivers have been marked as unsupported and are now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it. If its support status " "does not change, they will be removed in the Stein development cycle." msgstr "" #: ../source/rocky.rst:693 msgid "" "VMAX driver - configuration tag san_rest_port will be replaced by " "san_api_port in the next release." msgstr "" #: ../source/rocky.rst:698 msgid "" "The Disco driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it. If its support status " "does not change, it will be removed in the Stein development cycle." msgstr "" #: ../source/rocky.rst:706 msgid "" "Cinder's Google backup driver is now called gcs, so ``backup_driver`` " "configuration for Google Cloud Storage should be updated from ``cinder." "backup.drivers.google`` to ``cinder.backup.driver.gcs``." msgstr "" #: ../source/rocky.rst:710 msgid "" "The HGST driver has been marked as unsupported and is now deprecated. " "``enable_unsupported_driver`` will need to be set to ``True`` in the " "driver's section in cinder.conf to continue to use it. If its support status " "does not change, it will be removed in the Stein development cycle." msgstr "" #: ../source/rocky.rst:718 msgid "" "The NetApp E-Series drivers are deprecated as of the Rocky release and will " "be removed in the Stein release. Other configurations of the NetApp driver, " "i.e Clustered Data ONTAP and Solidfire, are unaffected." msgstr "" #: ../source/rocky.rst:736 msgid "" "Privsep transitions. Cinder is transitioning from using the older style " "rootwrap privilege escalation path to the new style Oslo privsep path. This " "should improve performance and security of Cinder in the long term." msgstr "" #: ../source/rocky.rst:742 msgid "" "Privsep daemons are now started by Cinder when required. These daemons can " "be started via rootwrap if required. rootwrap configs therefore need to be " "updated to include new privsep daemon invocations." msgstr "" #: ../source/rocky.rst:762 msgid "" "Add option `max_luns_per_storage_group` back. The max LUNs per storage group " "was set to 255 before. With the new option, admin can set it to a larger " "number." msgstr "" #: ../source/rocky.rst:784 msgid "" "NetApp ONTAP (bug 1765182): Make ONTAP NetApp iSCSI driver and FC driver " "report to the Cinder scheduler that they don't support online volume " "extending." msgstr "" #: ../source/rocky.rst:790 msgid "" "Make Cinder scheduler check if backend reports `online_extend_support` " "before performing an online extend operation." msgstr "" #: ../source/rocky.rst:795 msgid "" "NetApp ONTAP (bug 1765182): Make ONTAP NetApp NFS driver report to the " "Cinder scheduler that it doesn't support online volume extending." msgstr "" #: ../source/rocky.rst:800 msgid "" "Fixed QNAP driver failures to create volume and snapshot in some cases." msgstr "" #: ../source/rocky.rst:805 msgid "" "Fixed QNAP driver failures to detach iscsi device while uploading volume to " "image." msgstr "" #: ../source/rocky.rst:836 msgid "" "[`bug 1772421 `_] " "INFINIDAT fixed a bug in volume extension feature where volumes were not " "extended to target size but added the given target size." msgstr "" #: ../source/rocky.rst:863 msgid "" "Google backup driver now works when using ``google-api-python-client`` " "version 1.6.0 or higher." msgstr "" #: ../source/rocky.rst:874 msgid "" "Storwize SVC Driver: Fixes `bug 1749687 `__ previously lsvdisk() was called separately for every 'in-" "use' volume in order to check if the volume exists on the storage. In order " "to avoid problem of too long driver initialization now lsvdisk() is called " "once per pool." msgstr "" #: ../source/rocky.rst:895 msgid "" "Two new policies \"volume_extension:type_get\" and \"volume_extension:" "type_get_all\" have been added to control type show and type list APIs." msgstr "" #: ../source/rocky.rst:899 msgid "" "Added a new optional cache of volumes generated from snapshots for the " "Quobyte backend. Enabling this cache speeds up creation of multiple volumes " "from a single snapshot at the cost of a slight increase in creation time for " "the first volume generated for this given snapshot. The " "``quobyte_volume_from_snapshot_cache`` option is off by default." msgstr "" #: ../source/rocky.rst:911 msgid "" "Updated the parameter storwize_preferred_host_site from StrOpt to DictOpt in " "cinder back-end configuration, and removed it from volume type configuration." "" msgstr "" #: ../source/rocky.rst:942 msgid "" "Added schema validation support using jsonschema `[json-schema-validation]`_ " "for all supported v3 APIs." msgstr "" #: ../source/rocky.rst:945 msgid "" "Following APIs were accepting boolean parameters with leading and trailing " "white spaces (for e.g. \" true \"). But now with schema validation support, " "all these boolean parameters henceforth will not accept leading and trailing " "whitespaces to maintain consistency." msgstr "" #: ../source/rocky.rst:950 msgid "Generic volume groups:" msgstr "" #: ../source/rocky.rst:952 msgid "delete group: \"POST /v3/{project_id}/groups/{group_id}/action\"" msgstr "" #: ../source/rocky.rst:954 msgid "failover replication: \"POST /v3/{project_id}/groups/{group_id}/action\"" msgstr "" #: ../source/rocky.rst:955 msgid "Volume Snapshots:" msgstr "" #: ../source/rocky.rst:957 msgid "create a snapshot: \"POST /v3/{project_id}/snapshots\"" msgstr "" #: ../source/rocky.rst:958 msgid "Volume_actions:" msgstr "" #: ../source/rocky.rst:960 msgid "set bootable: \"POST /v3/{project_id}/volumes/{volume_id}/action\"" msgstr "" #: ../source/rocky.rst:962 msgid "" "volume readonly update: \"POST /v3/{project_id}/volumes/{volume_id}/action\"" msgstr "" #: ../source/rocky.rst:968 msgid "" "The \"cinder-manage logs\" commands have been removed. Information " "previously gathered by these commands may be found in cinder service and " "syslog logs." msgstr "" #: ../source/stein.rst:3 msgid "Stein Series Release Notes" msgstr "" #: ../source/train.rst:3 msgid "Train Series Release Notes" msgstr "" #: ../source/unreleased.rst:3 msgid "Current Series Release Notes" msgstr "" #: ../source/ussuri.rst:3 msgid "Ussuri Series Release Notes" msgstr "" #: ../source/victoria.rst:3 msgid "Victoria Series Release Notes" msgstr "" #: ../source/wallaby.rst:3 msgid "Wallaby Series Release Notes" msgstr "" #: ../source/xena.rst:3 msgid "Xena Series Release Notes" msgstr "" #: ../source/yoga.rst:3 msgid "Yoga Series Release Notes" msgstr "" #: ../source/zed.rst:3 msgid "Zed Series Release Notes" msgstr ""